Audi A5 2.0 TDI 2012 Onwards VW, Audi, Skoda, and Seat 1.6TDi and 2.0TDi Oil Cooler Take-Off Plate FMOC2

Here are the benefits and risks / things to watch out for (“prevention”) when installing an oil cooler take-off plate (like Forge’s FMOC2) on a VAG 1.6 TDI / 2.0 TDI engine (e.g. your Audi A5 2.0 TDI 2012+). 

🔧 What Is the Oil Cooler Take-Off Plate & How It Works

• The take-off plate (e.g. Forge FMOC2) replaces the stock VAG “oil‑to‑water cooler block” that sits on the front of the engine.  
• It provides two M22 ports (take-offs) for fitting external oil cooler lines (AN‑6 to AN‑10) so you can mount a separate, high-capacity oil cooler.  
• This means oil is routed out of the engine, cooled externally, then returned — reducing oil temperature under heavy load.  

✅ Key Benefits

1. Better Oil Temperature Control
   
• With an external cooler, you can maintain more stable oil temperatures. According to Forge, without it, oil temps “can rocket … over 120°C (250°F),” which is dangerously high and can cause oil breakdown.  
• Stabilising oil temperature helps improve engine reliability, especially under heavy load (e.g. towing, performance tuning, or spirited driving).  
2. Improves Engine Longevity / Performance
   
• By avoiding oil overheating, you reduce thermal stress on the oil and engine internals. This is especially useful if you’ve tuned your TDI or push the engine hard.  
• More consistent oil temperature can help preserve oil viscosity, which means better lubrication and protection during high-stress operation.
3. Flexibility / Aftermarket Compatibility
   
• The two M22 ports give you options to use different sizes of lines (AN‑6 to AN‑10), so you can tailor the oil-cooling setup depending on your external cooler capacity.  
• This setup is more modular than the OEM cooler block, giving more room for custom / performance cooling systems

⚠️ Risks / What to Watch Out For (Prevention)

• Installation Quality Matters: Poor installation (incorrect adaptors, wrong hose size, loose fittings) can lead to oil leaks or even cooler failure.
• Compatibility Check: Make sure the plate matches your engine block and OEM part number. Forge’s plate replaces VAG OEM 03L 117 021 C.  
• Coolant Circulation: Although the plate allows coolant to flow, you have to make sure the coolant system is still set up properly. If not done right, you might upset your engine’s cooling balance.  
• Oil Cooler Sizing: Using too small or inefficient external coolers may not provide the benefit you expect; too large or poor airflow could also lead to cooling issues.
• Maintenance: The external cooler, hoses, and fittings will need periodic checks. An overlooked external cooler or corroded AN lines could lead to failure later.
• Cost / Complexity: More parts + labor = more cost. Also, this setup is more complex than the stock system.

💡 Recommendation (for Your 2012 A5 2.0 TDI)

• If you drive aggressively, tow, or tune your engine: this take-off plate + a decent external oil cooler is highly recommended — helps protect the engine under stress.
• If you’re mostly doing normal driving: benefit may be smaller, but still useful for long-term reliability, especially if conditions are hot or you’re pushing the car.
• Use a qualified mechanic who understands VAG TDI engines and AN-line setups to install it properly.
• Pair the plate with a good quality external oil cooler and use the right size hoses / fittings to maximise the benefit.

**This plate replaces the VAG OEM Part No. 03L 117 021 C. It fits ALL of the 2.0TDi and 1.6 TDi engines in the vehicles listed below.

VW: 2010-on Amarok, 2012-on Beetle, 2010-on Caddy, 2012-on CC, 2012-on Crafter, 2011-2016 Eos, 2012-on Golf Cabriolet, 2009-on Golf, 2009-2014 Golf Plus, 2011-on Jetta, 2011-on Passat, 2010-on Polo, 2009-on Scirocco, 2008-on Tiguan, 2011-on Touran, and 2010-on Transporter

Audi: 2011-on A1, 2009-2013 A3, 2008-on A4, 2012-on A5, 2011-on A6, 2012-on Q3, 2009-on Q5, and 2011-on TT

Skoda: 2011-on Fabia, 2009-on Octavia, 2012-on Rapid, 2011-on Roomster, 2008-on Superb, and 2010-on Yeti

Seat: 2011-on Alhambra, 2007-on Altea, 2009-on Exeo, 2009-on Ibiza, 2011-on Leon, and 2013-on Tolde

Audi A5 2.0 TDI 2012 Onwards VW, Audi, Skoda, and Seat 1.6TDi and 2.0TDi Oil Cooler Take-Off Plate FMOC2

 

VR Performance Porsche 991 | 991.2 GT3 RS Valvetronic Exhaust System With Headers VR-991-2GT3-170S

Here are the pros and cons of the VR Performance Valvetronic Exhaust System with Headers (VR-991-2GT3-170S) for the Porsche 991 / 991.2 GT3 RS, based on available specs, reviews, and typical trade-offs. 

What It Is / Key Specs

First, a quick summary of what the system actually is, to ground the pros and cons:

• Full valved cat-back + free-flow headers.  
• Made from 304 stainless steel.  
• Total weight ~ 48.9 lb (~22.2 kg) (Headers ~17.15 lb + Cat-back ~31.75 lb).  
• Uses dual 3-inch (76 mm) mandrel-bent piping, with built-in valves.  
• Valve functionality: you can switch between “valves closed” (quieter) mode or “valves open” (loud, aggressive) mode.  
• Compatible with factory Porsche Sport Exhaust button or using a remote.  
• Includes free-flow (catless) race headers.  
• Fitment: 991 GT3 / GT3 RS (2014-2016) and 991.2 GT3 / GT3 RS (2017-2019).  
• Easy installation (according to spec): “no modification required.”  

Pros

1. Sound Flexibility (Valvetronic)
   
• The valvetronic system lets you tune the sound on the fly — quieter for daily or street use, very aggressive for track or spirited driving.  
• When valves are open, you get a raw, motorsport-inspired tone (“raw exhaust tone”).  
2. Performance Gains
   
• Free-flow headers help reduce backpressure, improving exhaust flow and potentially increasing throttle response.  
• The large 3″ mandrel-bent pipes improve flow vs stock.
3. Weight Reduction
   
• Lightweight construction (around ~48.9 lb) is likely lighter than some OEM/existing exhaust, which helps reduce unsprung mass / rotational mass.  
4. Build Quality
   
• Made from 304 stainless steel, which is durable, resists corrosion, and handles high heat.  
• TIG welds and well-designed piping (CAD-modeled fitment) → good reliability + fitment.  
• They include longer header studs to account for thicker header flanges, so they think through the installation details.  
5. Valve Control Integration
   
• Works with the factory Porsche Sport Exhaust (PSE) button, so you don’t necessarily need to rewire or massively modify your car to control the valves.  
• Alternatively, you can control via a remote (if you prefer to override factory behavior).  
6. Aggressive Sound When Desired
   
• With valves open, this system can make the GT3 RS sound much more like a race car. This is a big appeal if you want a more visceral, emotional driving experience.  
• On the track or under high RPM, you can fully unleash the exhaust — giving a very authentic “flat-six scream.”  
7. Bolt-on Installation
   
• According to the spec sheet, no major modifications are required, making it more user-friendly for installation compared to very custom or race-only systems.  
• Because it’s made with precision CAD / 3D scanning, the fitment should be tight and clean.  

Cons / Drawbacks

1. Cost
   
• For the full system, it’s a significant investment.  
• Shipping, import costs, and potential duties (especially for markets outside the U.S.) could significantly increase total cost.
2. Street Legality / Emissions
   
• Depending on your region, this may not be fully street-legal. (Some performance exhausts, especially with free-flow headers, might not comply with emissions laws or noise regulations.)
• On the certain websites , there’s a notice that “this product is for racing competition only.”  
• May also fail local noise regulations, depending on how open the valves are used.
3. Drone / Cabin Noise
   
• With valved exhausts, even with valves closed, there can still be more cabin noise (or resonance) compared to fully OEM.
• Under load or certain RPMs (especially at highway cruising), the system might produce undesirable drone. (This is a common trade-off in valved and high-flow systems.)
• While not specific to this system, many aftermarket exhaust users report “downshift pops” being louder, which can be great for track but annoying in daily driving.
  
4. Weight Savings but Not Extreme
   
• While there is weight saving, it’s not a “race-car-only titanium system” — in absolute terms, the weight reduction might not be huge vs some high-end race systems.
• If you’re chasing minimal weight, there are more extreme lightweight options (like titanium) — but they typically cost more.
5. Heat
   
• Free-flow headers and 304 stainless can get very hot. Might increase under-hood / rear-bay temperatures.
• Potentially more heat soak or heat radiation to surrounding components, depending on your heat management.
6. Maintenance / Durability
   
• Over time, valvetronic systems add mechanical complexity (valves, actuators) compared to a straight pipe. That means more potential points of failure.
• If used hard on track, the stress on the headers and welded joints could lead to fatigue or cracks over many track hours (though good build quality mitigates this).
7. Weight of Valves & Components
   
• While the total system is relatively light, the valves and additional hardware add complexity and some weight compared to a non-valved race system.
• The remote or control system (if used) adds wiring / control complexity.
8. Warranty / Legality Risk
   
• Installing aftermarket exhaust + headers may risk certain aspects of the car’s warranty (depending on your region and how “bolt-on” friendly the manufacturer / dealer is).
• If used on public roads and not declared / certified, could run into legal / insurance issues.

My Verdict / Recommendation

• Best For: Track-focused or high-performance enthusiasts who want a dual-personality exhaust — something quiet enough for daily driving or commuting (with valves closed), but wild and race-like when pushing hard (valves open).
• Considerations: If you’re mainly doing street driving and want loudness 24/7, you might be okay with a simpler non-valved performance exhaust. But if you care about both sound tuning and performance, this VR-Performance system is a very strong candidate.
• Next Steps:
  
1. Check local laws / regulations (noise, emissions) to make sure it’s legal for where you drive.
2. Talk to a trusted exhaust or performance shop to assess heat management and installation best practices.

VR Performance Porsche 991 | 991.2 GT3 RS Valvetronic Exhaust System With Headers VR-991-2GT3-170S

 

2000-2006 BMW 3 Series E46 Duraflex Savala Front Fenders - 2 Pieces SKU: K2-7933-BMW-114-OFR

What the Part Is.

• The part is Duraflex Savala front fenders, 2-piece set for the BMW E46 (3 Series) from 2000 to 2006.  
• Part number: 118940 according to multiple sources.  
• Material: FRP (Fiberglass Reinforced Plastic) — these are not OEM steel; they’re lightweight but require proper prep.  
• Finish: They come in a black primer / gel-coat finish, so you should plan to paint them.  
• Duraflex claims a “proprietary polymer blend for maximum flexibility” and “reduced damage rate up to 75%” compared to traditional fiberglass.  
• Installation: Because it’s FRP, you will likely need to dry-fit, drill, and do bodywork.  

Pros & Risks / Considerations

Pros:

• Can give your E46 a more aggressive or custom look (Savala-style flares).
• Lighter than OEM steel fenders, which could help slightly with weight.
• Duraflex’s “flexible” FRP is more resilient than brittle fiberglass — less likely to crack under small impacts.

Risks / Downsides:

• Fitment: Aftermarket FRP parts may not align perfectly — need to dry-fit and make adjustments.
• Prep Work: Requires sanding, filling, and painting for a good finish.
• Durability: While more flexible, FRP can still be less durable than metal under certain stresses.
• Shipping & Import: If you’re in Malaysia, shipping FRP body panels can be expensive and risky.
• Hardware: Mounting hardware may not come included — check with seller.

Recommendation

• If you’re building a show / modified car (or want a unique look), these are a solid option.
• But if you want durability and OEM-level fitment, also consider OEM steel fenders (or good-quality metal aftermarket).
• Talk to a local body shop before ordering: show them the part pictures, confirm whether they can do the painting & fitting, and ask about import feasibility (duty, shipping).

2000-2006 BMW 3 Series E46 Duraflex Savala Front Fenders - 2 Pieces SKU: K2-7933-BMW-114-OFR

 

APR GT-250 Honda Civic Type R Spec Wing - Honda Type R 2017 - up

Here’s a breakdown of the APR GT-250 wing options for the Honda Civic Type R (FK8, 2017+).

What Is the APR GT-250 Wing for Type R

• The GT-250 is an adjustable 2D airfoil wing designed to produce good downforce with minimal drag.  
• Made from pre-preg carbon fiber (very lightweight, very strong).  
• Comes with pre-installed Gurney flaps to further improve aerodynamic performance.  
• Uses 6061 billet aluminum pedestals (brackets) for mounting.  
• Angle of attack is adjustable — so you can tune how much downforce vs drag you want.  
• Fitment: Uses factory spoiler mounting holes on the Type R — so no need for crazy custom mounting if done properly.  
• Compatibility: Specifically fits Honda Civic Type R FK8 (2017–2021).  

Pros & Considerations

Pros:

• Very good aerodynamic performance (downforce) — helps with stability at high speeds / track driving.
• Lightweight (carbon fiber) — adds minimal weight.
• Adjustable angle — can tune for your driving style.
• OEM-mount compatibility (uses factory spoiler holes) — relatively clean install if done properly.

Considerations / Downsides:

• Carbon fiber wings are expensive.
• With adjustable angle, if you set high downforce, you’ll create more drag, affecting top speed.
• Need to ensure correct installation — misalignment can damage or vibrate, especially during high-speed cornering.
• Lead time (2–3 weeks for some variants) — not something you can pick up local unless a seller stocks it.

Recommendation (for You)

• If you’re doing a track-focused build: Go for the 67″ GT-250 (either standard or swan-neck) — more downforce, more surface.
• If it’s more for street + occasional weekend spirited driving: The 61″ version might be enough and look more balanced.
• Make sure to talk to a local or regional parts importer / performance shop: shipping a carbon wing can be expensive, and you might need to pay import duty / tax.
• When installing, either do it professionally or double-check torque specs and alignment — you don’t want it to flex badly or stress the trunk.

 

APR GT-250 Honda Civic Type R Spec Wing - Honda Type R 2017 - up