Injen 05-07 VW MKV Jetta/Rabbit 2.5L-5cyl Polished Cold Air Intake SP3026P

1. It is Injen's patent-pending MR Technology process for optimal gains and for safe air/ fuel ratio. 

2. The MR Technology process has its effects on both types either Speed Pro Series or Short Ram Systems.

3. The Speed Pro Series are the world's first bolt-on tuned intake systems designed specifically for your vehicle. 

4. The aluminum tubes are got variety of finishes with the blue synthetic filters will prevent particles from contaminating the engine.

Injen 05-07 VW MKV Jetta/Rabbit 2.5L-5cyl Polished Cold Air Intake SP3026P

 

Eventuri Toyota A90 Supra Black Carbon Headlamp Duct eveEVE-A90-CF-HDP

1. The MKV A90 Supra had seriously becomes popular as a true blood track car with special requirement for cold air feed; to give you an extra edge. 

2. This headlamp duct replaces the OEM headlamp. It gives a true RAM-AIR configuration with a direct cold air feed to the intake or stand-alone turbo. 

3. The Eventuri Toyota A90 Supra headlamp duct gives the most direct cold air feed possible to reduce heat soak that lead to sustain track times consistency.

4. The duct has the same lines as the stock headlamp with two carbon air guides: to feed the OEM air feed and to feed the entire airbox area. 

5. When cold air being forced into the engine bay, heat soak will be reduced allowing for multiple drag runs. 

6. Crafted from prepreg carbon fiber, the duct has high structural strength and rigidity. 

7. Secured with laser cut stainless steel brackets on the OEM mounting points, it will stay in position even at high speeds. 

8. Every possible advantage will be counted for. This extra headlamp duct is truly extraordinaire for speed enthusiasts.

Eventuri Toyota A90 Supra Black Carbon Headlamp Duct eveEVE-A90-CF-HDP

 

Anderson Composites HOOD CHEVROLET CAMARO 3 INCH COWL 2010-2015AC-HD1011CHCAM-CP-GF

1. This is Anderson Composites 2010 - 2015 CAMARO TYPE-COPO FIBERGLASS COWL HOOD

2. Featuring a Type-CP (COPO style) fiberglass hood with 3 inch cowl for 2010-2015 Chevrolet Camaro

*Also fits 2014-2015 (hood has 2010-2013 body line in center of hood)

*Mounts with OE hardware, hinges and latch 

*Does not have a provision for the OE windshield washer nozzles and hose.

*Fiberglass hood (A side) bonded to fiberglass "skeleton" (B side)

*Do not push hard on surface when sanding. Do not bake with paint curing lamp, allow to cure with ambient air temperature.  

*All hoods require hood pins for safety reasons. Anderson Composites will not be liable for any damages to the product and the vehicle caused by not properly using hood pins- AeroCatch or Quic-Latch 

*Heat shield required 

*Always carefully close a composite hood. Slamming or dropping the hood may cause it to crack.

*Anderson Composites does not suggest re-installing gas shocks/ dampers/ struts

*The use of a hood prop rod is highly recommended

* Hand crafted; approximate weight 25.4 lbs.

Anderson Composites HOOD CHEVROLET CAMARO 3 INCH COWL 2010-2015AC-HD1011CHCAM-CP-GF

OSGIKEN TR SERIES TWIN PLATE CLUTCH KIT FOR NISSAN SILVIA S15 SR20DET TR2CD-S15

 

OSGIKEN TR SERIES TWIN PLATE CLUTCH KIT FOR NISSAN SILVIA S15 SR20DET TR2CD-S15

Compatible Car: Nissan Silvia S15

Compatible Engine: SR20DET 

Model year: - 

Clutch cover type: Aluminum cover type Number of discs: Twin disc type 

Disc diameter size: 215mm 

Other indications: Disc type with damper Reinforced twin plate of metal disc. 

**This is a perfect clutch for hard users who are active in a variety of races such as time attack, gymkhana and dirt trials.

OSGIKEN TR SERIES TWIN PLATE CLUTCH KIT FOR NISSAN SILVIA S15 SR20DET TR2CD-S15

GRUPPEM RAM AIR SYSTEM FOR MERCEDES BENZ C-CLASS 205086 205286 205386 FRI-0407

 

GRUPPEM RAM AIR SYSTEM FOR MERCEDES BENZ C-CLASS 205086 205286 205386 FRI-0407

Compatible Engine: 177

Manufacturer: GruppeM 
Brand: GroupM GruppeM 
code: 205 
Displacement: 4.0 LITER 
Grade / Specifications: C63 AMG TWIN TURBO

The specially designed carbon duct has been developed to completely block the hot air in the engine room. 

Fresh air is directly introduced to lower and stabilize the intake air temperature. 

Achieves torque and power-up in the entire range from low to high revs. 

You can also enjoy the sporty intake sound. Installation is bolt-on with a dedicated fitting adapter. 

GRUPPEM RAM AIR SYSTEM FOR MERCEDES BENZ C-CLASS 205086 205286 205386 FRI-0407

MERCEDES BENZ SL55 AMG / E63 AMG / C63 AMG DIXCEL DISC ROTOR TYPE FS 2-PIECE ROTOR FS-36036S62R/63L

 

MERCEDES BENZ SL55 AMG / E63 AMG / C63 AMG  DIXCEL DISC ROTOR TYPE FS 2-PIECE ROTOR FS-36036S62R/63L 

Compatible Vehicles: 
MERCEDES BENZ 

TYPE: Drilled & Slit 
Outer diameter: 360.0 
Thickness: 36.0 
inner bore: 215.6 
outer bore : 169.0 
flange thickness: 7.0 
offset: 0.0 
outer disk thickness: 10.0 
inner disk thickness: 10.0 
air gap: 16.0 
PCD: 196.0 
number of holes: 10 
hole diameter: 9.0 

DIXCEL bolt / nut part number and quantity (per sheet): 
bolt: BT-BB-702 × 10 

nut: NT-BB-305 × 10 

DIXCEL bobbin / spring part number and quantity (per sheet): set no 
2- piece rotor (assembly / outer rotor) 

1. In every harsh racing field, this disc rotor from DIXCEL demonstrated the wonders of the performance.

2. The bell housing and the rotor:

By configuring in separate parts, prevent judder due to thermal collapse and distortion of the rotor, reduce the heat damage to the hub. 

It also effective in reducing unsprung weight. 

3. Because it is possible to replace the rotor part of consumable parts only (outer rotor), it is now possible to reduce the total cost. 

4. Since this is pure exchange type, it does not require additional processing attachment. Caliper also can be used as is the genuine caliper.

MERCEDES BENZ SL55 AMG / E63 AMG / C63 AMG  DIXCEL DISC ROTOR TYPE FS 2-PIECE ROTOR FS-36036S62R/63L 

BREMBO EXTRA BRAKE DISCS LEFT AND RIGHT SET FRONT FOR VOLKSWAGEN GOLF VII AUCJXF AUDJHF 13.09~ 09.C306.1X

 

BREMBO EXTRA BRAKE DISCS LEFT AND RIGHT SET FRONT FOR VOLKSWAGEN GOLF VII AUCJXF AUDJHF 13.09~ 09.C306.1X

Compatible car: VOLKSWAGEN GOLF VII AUCJXF AUDJHF 13.09~

※This product is a type that replaces the genuine product.

1. Experience the world's top level Brembo quality while pursuing cost performance for your Volkswagen Golf VII.

2. Brembo brake discs eliminate uneven weight distribution of ventilated discs with an electronic balancer system. 

3. Anti-corrosion treatment has been applied, which has improved not only the appearance but also the product life and braking effect and has made it possible to maintain performance for a long time. 

4. This is a replacement brake disc that was developed from a high-performance vehicle  to be compatible with a wide range of vehicle models. 

5. BREMBO pursue cost performance by producing in own factory, designing parts using BREMBO know-how, develop and produce using cutting-edge technology. 

6. This brake disc is very close to the feel of the original and achieves high performance as demanded. 

7. Brembo is a top brand in brake systems for high-end vehicles such as race cars and luxury cars. 

8.The technical capabilities of the brake system which is recognized worldwide have achieved a performance level that is incomparable to other companies. 

9. It is used in races around the world, including F1 and is also used as an original part by Japanese car manufacturers, 
providing not only product performance but also peace of mind and reliability. 

▼Product name
brembo Brembo Extra Brake Disc
▼Model number
09.C306.1X
▼F/R
Front
▼Automobile manufacturer
VOLKSWAGEN
▼Vehicle model
GOLF VII
▼Model number
AUCJXF AUDJHF
▼Year
13/09~
▼Remarks
【Note 5】《Grade》2.0 R
▼Notes
【Note 5】If EPB is installed, a special computer is required to replace the rear rotor
▼JAN code
4580439055865

BREMBO EXTRA BRAKE DISCS LEFT AND RIGHT SET FRONT FOR VOLKSWAGEN GOLF VII AUCJXF AUDJHF 13.09~ 09.C306.1X

GRUPPEM RAM AIR SYSTEM FOR E39 BMW 5 SERIES DE50 FRI-0114

 

GRUPPEM RAM AIR SYSTEM FOR E39 BMW 5 SERIES DE50 FRI-0114

Compatible Engine: 50 8S (S62)

Manufacturer: GruppeM 
Brand: GroupM GruppeM 
code: E39 
Displacement: 5.0 LITER 
Grade / Specifications: M5

1. The specially designed carbon duct has been developed to completely block the hot air in the engine room. 

2. Fresh air is directly introduced to lower and stabilize the intake air temperature. 

3. Achieves torque and power-up in the entire range from low to high revs. 

4. You can also enjoy the sporty intake sound. Installation is bolt-on with a dedicated fitting adapter. 

GRUPPEM RAM AIR SYSTEM FOR E39 BMW 5 SERIES DE50 FRI-0114

GARAGE VARY INTAKE PIPE FOR TOYOTA 86 ZN6 ZENKI 30-2023

 

GARAGE VARY INTAKE PIPE FOR TOYOTA 86 ZN6 ZENKI 30-2023

1. This is an intake pipe plain weave carbon clear gel coat finish, unpainted product from Garage Vary for Toyota 86 ZN6 Zenki.

2. The chamber effect improves the torque when stepping on or re-stepping on the accelerator. 

3. The difference at the time of power check from the genuine suction is 3.6 ps at the maximum output 

4. About 8 ps at around 4,000 rpm where the difference is the widest.

5. Average from 3,000 to 7,000 rpm. Approximately 2.5 ps improvement 

6. Accessories:
-Silicon joint 60 mm x 1 
-Silicon joint 50 mm x 1 
-Rubber cap 1 piece 
-Rubber bush x 1 piece 
-Hose clamp x 4

GARAGE VARY INTAKE PIPE FOR TOYOTA 86 ZN6 ZENKI 30-2023

PROJECT MU RACING RACING-N+ FRONT BRAKE PADS WITHOUT SENSOR FOR BMW E60 SEDAN M5 Z327-RACING-N+

 

PROJECT MU RACING RACING-N+ FRONT BRAKE PADS WITHOUT SENSOR FOR BMW E60 SEDAN M5 Z327-RACING-N+

Compatible Car: BMW E60 Sedan M5

Grade and Year Model: 04/11~ NB50

Material: Super graphite metallic

Applicable Rotor Temperature: 100-800C

Friction Coefficient: 0.39-0.48u

This model offers linear braking commensurate with pedal pressure and stable control in even the most extreme circuit driving conditions.

The Project Mu Racing Racing-N+ Front Brake Pads are a high-performance upgrade designed for the BMW E60 Sedan M5 (Z327). 

These pads cater specifically to enthusiasts and professionals looking for exceptional braking performance under demanding conditions, such as track or racing applications.

Features:

• High Friction Coefficient: Engineered for optimal stopping power and fade resistance, even under high temperatures.

• Durability: Designed to handle extreme use while maintaining consistent performance and wear characteristics.

• Sensor Compatibility: The pads come without a built-in wear sensor, making them ideal for track-focused builds where sensor feedback is unnecessary.

• Racing Compound: Tailored to provide consistent pedal feel and confidence-inspiring braking at high speeds.

Benefits:

• Improved Braking Performance: Ideal for high-performance applications where factory pads may fall short.

• Track-Ready Design: Ensures fade-free performance for extended sessions.

• Reduced Maintenance: Durable compound reduces the frequency of pad changes during heavy use.

   If you plan to install these pads on your BMW E60 M5, ensure your braking system is inspected for compatibility, especially if you’re upgrading other components like rotors or calipers. 

  Pairing them with a high-quality brake fluid is also recommended for optimal results.

PROJECT MU RACING RACING-N+ FRONT BRAKE PADS WITHOUT SENSOR FOR BMW E60 SEDAN M5 Z327-RACING-N+

 

Seibon Mercedes C-Class Gt Hood 2012 - 2014 HD1112MBW204-GT

1. Seibon Mercedes C-Class GT Hood carbon components are carefully hand-crafted using only the finest materials.

2. Seibon production team delivered superior craftsmanship with over 15 years of experience working with carbon fiber. 

3. Every component is constructed with a consistent weave pattern with great quality.

4. Seibon production processes allow exceptional carbon/ resin ratio, creating high product stiffness that also leads to extra strength. 

5. For a stunning finish, Seibon products are coated with a glossy clear coat that does not chip or flake. 

6. The genuine Seibon Carbon products uphold strict quality control for the best quality.

7. Seibon had created a performance-oriented products that help shed unnecessary weight without sacrificing style.

8. Seibon Carbon products proved to be the preferred brand among professional drivers.

Seibon Mercedes C-Class Gt Hood 2012 - 2014 HD1112MBW204-GT

 

Scotidi Dual Billit Calipers Brackets for Ford Mustang '05-'14 GT500 Brakes 004-008-0107

• This is a great opportunity to upgrade to big 13.8" GT500 rear rotors AND get a second caliper mount for a handbrake. Use factory calipers.

• Completely replaces the stock caliper bracket

• Mounts for 2 stock GT/Base S197 rear calipers

• Use for a handbrake or staging brake setup

• Legal only for use in competition vehicles which may never be registered, licensed, and/ or used on public streets or highways; and also for use in other exempted vehicles.

Scotidi Dual Billit Calipers Brackets for Ford Mustang '05-'14 GT500 Brakes 004-008-0107

SPOON VENTURI BIG THROTTLE BODY NTS FOR HONDA CIVIC FK8 FL5 K20C 16400-FK8-021

 

SPOON VENTURI BIG THROTTLE BODY NTS FOR HONDA CIVIC FK8 FL5 K20C 16400-FK8-021

Compatible Car: HONDA CIVIC FK8 FL5

Compatible Engine: K20C 

Compatible Models: DBA-FK8, 6BA-FK8, 6BA-FL5

**Throttle inlet diameter 65.0mm (STD 62.5mm). Area ratio increased by 8.2%

**Butterfly diameter 62.0mm (STD 60.0mm). Area ratio increased by 6.8%

1. Honda had increasingly tuned turbo engines in recent years with the advancement of powertrains, considering a turbo engine to be an NA engine with extremely high intake efficiency. 

2. It is crucial to guide as much air as possible into the combustion chamber with less resistance to efficiently improve output. This product was born from SPOON idea that "it is indeed a unique element." 

3. This throttle body has an enlarged butterfly diameter which increases the flow path area. It will increase the amount of intake air that lead to improve the output significantly.

4. By improving the surface roughness inside the body and lowering the flow path resistance, the flow velocity of intake air increases and response is improved. 

5. The intake layout of Honda cars is very good even with turbo engines. To make the most of its performance based on a normal throttle body, no modification to the car body is required. 

SPOON VENTURI BIG THROTTLE BODY NTS FOR HONDA CIVIC FK8 FL5 K20C 16400-FK8-021

SPOON TAIL SILENCER [STREET] EXHAUST/MUFFLER FOR HONDA CIVIC EG6 EK4 EK9 18030-EG6-000

 

SPOON TAIL SILENCER [STREET] EXHAUST/MUFFLER FOR HONDA CIVIC EG6 EK4 EK9 18030-EG6-000

Compatible Car: 

HONDA CIVIC EG6 EK4 EK9

Compatible Models: 

EG6, EK4 Zenki, EK4 Kouki, EK9 Zenki, EK9 Kouki

1. This is a street type muffler from SPOON with an elegant sound quality that emphasis on torque characteristics. 

2. The flow rate and the flow rate amount are secured sufficiently to maintain adequate pressure and volume in the system

3. Genuine with the same reference flange, combination with mass production intermediate pipe is also possible. 

Main pipe diameter: 60

Outlet diameter: 75

SPOON TAIL SILENCER [STREET] EXHAUST/MUFFLER FOR HONDA CIVIC EG6 EK4 EK9 18030-EG6-000