aFe BladeRunner GT Series Intercooler Kit for Honda Civic 16-18 L4-1.5L (t) afe46-20342-R

**The GT Series BladeRunner Intercooler Kit for the Honda Civic/Civic Si 16-18 I4-1.5L (t) features a 5-1/2" thick bar and plate core that outflows the OE intercooler system by up to 22%.

• **Includes 2-1/4" Hot Side and 2-1/2" Cold Side Mandrel-Bent Aluminum Tubes
• **1/8" NPT Ports are Provided for Connecting Sensors or Water Methanol Injection
• **Heavy-Duty Billet Aluminum Inlet and Outlet
• **No Modifications Needed
• **Intercooler Tubes are Powder-Coated Textured Red for Heat and Corrosion Resistance

aFe BladeRunner GT Series Intercooler Kit for Honda Civic 16-18 L4-1.5L (t) afe46-20342-R

 

Duraflex TD3000 Front Bumper for Toyota Supra 1993-1998 EXD102526

1993-1998 Toyota Supra Duraflex TD3000 Wide Body Front Bumper Cover - 1 Piece

Note: 

1. Must be used in conjunction with complete wide body kitItem 100% must be installed by a professional body shop with experience fitting aftermarket body panels. 

2. Some modification/adjustment/final fit must be performed for proper fitment. 

3. No returns or refunds.

Duraflex TD3000 Front Bumper for Toyota Supra 1993-1998 EXD102526

 

Carbon Fiber Wind Splitter With Rods for Dodge Challenger Hellcat 2015-2019 - CW-723505 

***Fits Challengers with APR Lip

***All Front Wind Splitter are built to order. 

***Built time is 2 Weeks

1. To combat the effects of front end lift, APR Front Wind Splitters are utilized to give extra traction and control at the front of your Challenger. 

2. By creating a high pressure area on top of the wind splitter, high pressure air flow is restricted to flow underneath a car. 

3. With low pressure below the car, the effect of lift is reduced and you can gain from extra traction and control.

Carbon Fiber Wind Splitter With Rods for Dodge Challenger Hellcat 2015-2019 - CW-723505 

 

MagnaFlow 01-04 Honda Civic DX/LX Manifold DF Converter mag50884

MagnaFlow 01-04 Honda Civic DX/LX Manifold DF Converter mag50884

 

Ohlins 06-13 Lexus IS 250 IS 350 (XE20) Road & Track Coilover System ohlLESMI00S1

Ohlins LES Mi00S1 fits: 2006 - 2013 Lexus IS 2502006 - 2013 Lexus IS 350

1. This is an awesome Ohlins 06-13 Lexus IS 250/IS 350 (XE20) Road & Track Coilover System.

2. The Ohlins Road & Track suspension gives drivers a true racing experience without compromising comfort during daily commutes. 

3. Ohlins Dual Flow Valve (DFV) technology allows drivers to quickly change the stiffness of the shock absorber. When arriving to the racetrack, turn the gold knob on the damper clockwise to set it in race mode. 

4. This action changes all four areas of the damper: high & low speed compression and high & low speed rebound.

5. With Ohlins Road & Track coil overs you will experience a car with blistering response times, improved bump absorption and a massive amount of grip to increase the safety when driving your car on it limit. 

6. The car will be easier to balance on the edge of what the tires can handle before losing grip. You will be much quicker on track. 

7. The DFV suspension prevents you from losing the racing line when hitting bumps or curbs. 

8. The DFV components within react quickly and keeps you in control of the car and in contact with the track. 

9. When driving to and from the track, just set the dampers in road mode for a more relaxed and comfortable drive, still with more grip and quicker response time than ever before. 

Ohlins 06-13 Lexus IS 250 IS 350 (XE20) Road & Track Coilover System ohlLESMI00S1

SPOON PROGRESSIVE SPRING FOR HONDA CIVIC TYPE R FK8 51400-FK8-001

 

SPOON PROGRESSIVE SPRING FOR HONDA CIVIC TYPE R FK8 51400-FK8-001

Car height down amount front - 20 mm, rear - 20 mm 
Spring rate front 5.0 kgf / mm, rear 4.9 kgf / mm

The 10th generation CIVIC TYPE R is equipped with an adaptive damper system that independently controls the damping force of each of the four wheels.

SPOON has developed a lowdown spring that can achieve even higher steering feel and control performance while maximizing its precise adaptive damper system.

Car height is down by 20 mm in genuine ratio. Although the spring rate is up by about 10%, the thrust-up feeling in the low speed range is designed mild, so you can enjoy a wide range of streets, windings and circuits.

SPOON PROGRESSIVE SPRING FOR HONDA CIVIC TYPE R FK8 51400-FK8-001

FEEL'S HONDA TWINCAM FEEL'S SONIC MUFFLER FOR HONDA CIVIC FD2 TYPER FEELS-00222

 

FEEL'S HONDA TWINCAM FEEL'S SONIC MUFFLER FOR HONDA CIVIC FD2 TYPER FEELS-00222

Applicable model: CIVIC 
Applicable model: FD2 TypeR 
Product classification: Car Intake & Exhaust 
Product information: New regulation / pre-certification system compliant product 

The sports muffler has been renewed as "Sonic muffler". 

It is a full muffler exclusively for FEEL'S popular items that improves the goodness of the engine and allows you to experience the torque increase. 

Highly durable, lightweight and sporty-looking cannonball-type design. The intermediate pipe diameter is 60.5φ and the outlet diameter is 100.0φ, providing ideal exhaust performance. 

Product specifications: 

Main pipe All stainless steel 50.8φ-60.5φ 
End pipe 100.0φ FEEL'S logo quenching color development 
Weight about 11.5kg (genuine about 13.5kg)

FEEL'S HONDA TWINCAM FEEL'S SONIC MUFFLER FOR HONDA CIVIC FD2 TYPER FEELS-00222

FEEL'S HONDA TWINCAM SPORTS FRONT BUMPER FRP FOR HONDA S660 JW5 FEELS-00806

 

FEEL'S HONDA TWINCAM SPORTS FRONT BUMPER FRP FOR HONDA S660 JW5 FEELS-00806

A full bumper with an integrated grill that combines not only looks but also aerodynamic characteristics and cooling efficiency. 

Applicable model: S660 
Applicable model: JW5 
Product classification: Car Interior & Exterior 

Product information: 
Opening Aluminum net included. 
Number stay and a set of mounting parts are included. 

Product specifications: FRP products have a gel coat finish, so they need to be painted separately. 
Mounting classification: FRP

FEEL'S HONDA TWINCAM SPORTS FRONT BUMPER FRP FOR HONDA S660 JW5 FEELS-00806

 

Anderson Composites DOUBLE SIDED HOOD CHEVROLET CAMARO TYPE-CP 2016-2023 AC-HD16CHCAM-CP-DS

Anderson Composites 2016 - 2023 CHEVROLET CAMARO TYPE-CP DOUBLE SIDED CARBON FIBER HOOD

*COPO Style with more aggressive "cowl bulge"

*Vacuum infused process with 3K, 2x2 twill carbon fiber cloth, gloss finish

*Carbon fiber "skeleton" bonded to underside of carbon fiber hood - reduced weight

*Fits LT, RS and SS

*Mesh screen is removable and paintable

*Mounts with OE hardware

*All hoods require hood pins for safety reasons. Anderson Composites will not be liable for any damages to the product and the vehicle caused by not properly using hood pins - AeroCatch or Quic-Latch 

*Heat shield required 

*Anderson Composites does not suggest re-installing gas shocks/dampers/struts

*OE hood strut mount is only for temporary use while performing under hood maintenance 

*The use of a hood prop rod is highly recommended

* Hoods are hand crafted and weigh approximately 18.9 lbs.

Anderson Composites DOUBLE SIDED HOOD CHEVROLET CAMARO TYPE-CP 2016-2023 AC-HD16CHCAM-CP-DS

 

PRL Motorsports 2016-2021 Honda Civic 1.5T Front Pipe Upgrade PRL-HC10-FP

1. Fits all 2016-2021 Civic 1.5T. Fits all variant models including Si, CVT, 6MT, RHD, International Models.

2. Performance Gains:

• Increased mid-range & top-end exhaust flow

3. Kit Includes:

• Front Pipe Assembly

• PRL-HC10-DP-HW2 Front Pipe Hardware

4. Important Notes:

• NO ECU CALIBRATION REQUIRED

• REAR ENGINE MOUNT UPGRADE RECOMMENDED FOR OPTIMAL FITMENT & LONGEVITY

5. Technical Notes:

a) The PRL Motorsports front pipe upgrade gives optimal airflow and is recommended for those looking to push their 2016+ 1.5L Turbo Honda Civic even further. 

b) The front pipe is the first component in the exhaust path after the end of the emissions control system.

c) PRL Motorsports design utilizes 16 gauge mandrel bent 3" tubing, CNC machined flanges and high quality, reinforced flex-section. 

d) All components are 304 stainless steel and fully back-purged on site to withstand high exhaust gas temperatures. 

e) All kits will include gaskets, stainless hardware, and components needed for a seamless installation.

f) Exhaust components that may become damaged over time from being coated, heat wrapped or otherwise insulated in some capacity are not covered under the PRL Motorsport's Manufacturer Warranty. 

e) Insulating these components can cause heat to cause degradation of the material faster than would normally occur.

PRL Motorsports 2016-2021 Honda Civic 1.5T Front Pipe Upgrade PRL-HC10-FP

 

Anderson Composites DOORS (PAIR) FORD MUSTANG 2005-2009 AC-DD0506FDMU

This is Anderson Composites 2005 - 2009 MUSTANG CARBON FIBER DOORS OEM-style (Pair).

*Vacuum infused process with 3K, 2x2 twill carbon fiber cloth, gloss finish

*Doors for closed course competition/ racing use only, not for street use

*It is recommended to install a race sanction approved roll cage with door bars 

*Doors include locations for factory hardware

*Mounts with OE hardware

*May require modifications for correct fitment. Minor adjustments may be necessary as part of the normal installation process.

*Hand crafted; approximate weight 19.1 lbs. each

Anderson Composites DOORS (PAIR) FORD MUSTANG 2005-2009 AC-DD0506FDMU

 

Duraflex 86-R Front Bumper for Scion FRS 2013-2020 EXD109049

2013-2020 Scion FR-S Toyota 86 Subaru BRZ Duraflex 86-R Front Bumper Cover - 1 Piece

Item 100% must be installed by a professional body shop with experience fitting aftermarket body panels. 

Some modification/adjustment/final fit must be performed for proper fitment. 

No returns or refunds.

Duraflex 86-R Front Bumper for Scion FRS 2013-2020 EXD109049

 

XClutch XKBM23546-2E BMW M5 Motorsport Clutch Kit

Fitment: BMW M5 Base 2000-2003 BMW M5 Base 2000-2003

1. This is Clutch Kit Inc Chromoly Flywheel 9 in. Twin Solid Ceramic Clutch Discs

2. The XClutch performance upgrades have been engineered to provide the ultimate in clutch performance. 

3. Utilising the latest pressure plate design and friction material composition, XClutch upgrades offer the ideal balance between driveability and performance for different vehicle applications. 

4. The pivot point and diaphragm design are carefully analysed to ensure positive pedal feel and increased clamping force.

**Please see below for vehicle fitment.

Alignment Tool Included Yes 
Clamping Force % Increase N/A 
Clutch Disc Diameter 9 1/16 Inch
Disc Material Ceramic 
Disc Type Sprung Solid 
Solid Flywheel Bolts Included Yes 
Flywheel Included Yes 
Flywheel Step +0.150 Inch 
Friction Surface Configuration Raised 
Input Shaft Diameter 1 3/8 Inch 
Input Spline Quantity 10 
Maximum Torque 1350 Foot Pounds 
Pilot Bushing Included Yes Pressure Plate Bolts Included Yes 
Recommended Use Track Use 
Release Bearing Included Yes 
Spline Grease Included Yes 

Title XClutch USA Clutch Kit Inc Chromoly Flywheel 9 in. Twin Solid Ceramic Clutch Discs XKBM23546-2E 

XClutch XKBM23546-2E BMW M5 Motorsport Clutch Kit

 

AST 5300 Series Shock Absorbers Coil Over for Toyota GR86 Subaru BRZ RAC-S6401S

• Tested on tracks like the Nürburgring, Zandvoort, Imola, Laguna Seca, Macau and many others around the world.

  All AST 5300 Series Shock Absorber adjusters work completely independent. 

  Once installed the shock absorbers are easy to setup, highly reliable and require low maintenance during the season because of the high grade of materials used. 

  • 3-Way Adjustable, separate rebound and Low & Hi Speed compression adjustable with a remote reservoir. The positions give clear feedback with each adjustment, each offering a different driving experience. 
  • Inverted strut design to cope with (heavy) side load and braking loads. 
  • In some cases the non inverted system is used.
  • Improved handling and consistent performance due to Monotube technology. 
  • Ride Height adjustable. 
  • Gas Pressurized. 
  • Including AST top mounts / camberplates. High quality, noise free.
  • Including springs. Custom springrates are available. Call to order. 

AST 5300 Series Shock Absorbers Coil Over for Toyota GR86 Subaru BRZ RAC-S6401S

STI FLEXIBLE DRAW STIFFENER RR FOR SUBARU BRZ ZD8 ST20168VR000

 

STI FLEXIBLE DRAW STIFFENER RR FOR SUBARU BRZ ZD8 ST20168VR000

1. This is a flexible draw stiffener from STI attached to the rear ends of the left and right rear frame (inside the rear bumper).

2. It will apply an appropriate tension to correct the bending of the chassis while driving, resulting in agile initial steering and supple ride. 

3. Achieve a great balance. By improving the ground contact of the four wheels, driving stability during cornering is increased and a quick and straightforward steering feeling is realized. 

* *The mounting image is an image of mounting on the Levorg (VN type) and SUBARU BRZ (ZD type).

**2021/07 onwards 

STI FLEXIBLE DRAW STIFFENER RR FOR SUBARU BRZ ZD8 ST20168VR000