Anderson Composites DOUBLE SIDED HOOD CHEVROLET CAMARO TYPE-CP 2016-2023 AC-HD16CHCAM-CP-DS

Anderson Composites 2016 - 2023 CHEVROLET CAMARO TYPE-CP DOUBLE SIDED CARBON FIBER HOOD

*COPO Style with more aggressive "cowl bulge"

*Vacuum infused process with 3K, 2x2 twill carbon fiber cloth, gloss finish

*Carbon fiber "skeleton" bonded to underside of carbon fiber hood - reduced weight

*Fits LT, RS and SS

*Mesh screen is removable and paintable

*Mounts with OE hardware

*All hoods require hood pins for safety reasons. Anderson Composites will not be liable for any damages to the product and the vehicle caused by not properly using hood pins - AeroCatch or Quic-Latch 

*Heat shield required 

*Anderson Composites does not suggest re-installing gas shocks/dampers/struts

*OE hood strut mount is only for temporary use while performing under hood maintenance 

*The use of a hood prop rod is highly recommended

* Hoods are hand crafted and weigh approximately 18.9 lbs.

Anderson Composites DOUBLE SIDED HOOD CHEVROLET CAMARO TYPE-CP 2016-2023 AC-HD16CHCAM-CP-DS

 

PRL Motorsports 2016-2021 Honda Civic 1.5T Front Pipe Upgrade PRL-HC10-FP

1. Fits all 2016-2021 Civic 1.5T. Fits all variant models including Si, CVT, 6MT, RHD, International Models.

2. Performance Gains:

• Increased mid-range & top-end exhaust flow

3. Kit Includes:

• Front Pipe Assembly

• PRL-HC10-DP-HW2 Front Pipe Hardware

4. Important Notes:

• NO ECU CALIBRATION REQUIRED

• REAR ENGINE MOUNT UPGRADE RECOMMENDED FOR OPTIMAL FITMENT & LONGEVITY

5. Technical Notes:

a) The PRL Motorsports front pipe upgrade gives optimal airflow and is recommended for those looking to push their 2016+ 1.5L Turbo Honda Civic even further. 

b) The front pipe is the first component in the exhaust path after the end of the emissions control system.

c) PRL Motorsports design utilizes 16 gauge mandrel bent 3" tubing, CNC machined flanges and high quality, reinforced flex-section. 

d) All components are 304 stainless steel and fully back-purged on site to withstand high exhaust gas temperatures. 

e) All kits will include gaskets, stainless hardware, and components needed for a seamless installation.

f) Exhaust components that may become damaged over time from being coated, heat wrapped or otherwise insulated in some capacity are not covered under the PRL Motorsport's Manufacturer Warranty. 

e) Insulating these components can cause heat to cause degradation of the material faster than would normally occur.

PRL Motorsports 2016-2021 Honda Civic 1.5T Front Pipe Upgrade PRL-HC10-FP

 

Anderson Composites DOORS (PAIR) FORD MUSTANG 2005-2009 AC-DD0506FDMU

This is Anderson Composites 2005 - 2009 MUSTANG CARBON FIBER DOORS OEM-style (Pair).

*Vacuum infused process with 3K, 2x2 twill carbon fiber cloth, gloss finish

*Doors for closed course competition/ racing use only, not for street use

*It is recommended to install a race sanction approved roll cage with door bars 

*Doors include locations for factory hardware

*Mounts with OE hardware

*May require modifications for correct fitment. Minor adjustments may be necessary as part of the normal installation process.

*Hand crafted; approximate weight 19.1 lbs. each

Anderson Composites DOORS (PAIR) FORD MUSTANG 2005-2009 AC-DD0506FDMU

 

Duraflex 86-R Front Bumper for Scion FRS 2013-2020 EXD109049

2013-2020 Scion FR-S Toyota 86 Subaru BRZ Duraflex 86-R Front Bumper Cover - 1 Piece

Item 100% must be installed by a professional body shop with experience fitting aftermarket body panels. 

Some modification/adjustment/final fit must be performed for proper fitment. 

No returns or refunds.

Duraflex 86-R Front Bumper for Scion FRS 2013-2020 EXD109049

 

XClutch XKBM23546-2E BMW M5 Motorsport Clutch Kit

Fitment: BMW M5 Base 2000-2003 BMW M5 Base 2000-2003

1. This is Clutch Kit Inc Chromoly Flywheel 9 in. Twin Solid Ceramic Clutch Discs

2. The XClutch performance upgrades have been engineered to provide the ultimate in clutch performance. 

3. Utilising the latest pressure plate design and friction material composition, XClutch upgrades offer the ideal balance between driveability and performance for different vehicle applications. 

4. The pivot point and diaphragm design are carefully analysed to ensure positive pedal feel and increased clamping force.

**Please see below for vehicle fitment.

Alignment Tool Included Yes 
Clamping Force % Increase N/A 
Clutch Disc Diameter 9 1/16 Inch
Disc Material Ceramic 
Disc Type Sprung Solid 
Solid Flywheel Bolts Included Yes 
Flywheel Included Yes 
Flywheel Step +0.150 Inch 
Friction Surface Configuration Raised 
Input Shaft Diameter 1 3/8 Inch 
Input Spline Quantity 10 
Maximum Torque 1350 Foot Pounds 
Pilot Bushing Included Yes Pressure Plate Bolts Included Yes 
Recommended Use Track Use 
Release Bearing Included Yes 
Spline Grease Included Yes 

Title XClutch USA Clutch Kit Inc Chromoly Flywheel 9 in. Twin Solid Ceramic Clutch Discs XKBM23546-2E 

XClutch XKBM23546-2E BMW M5 Motorsport Clutch Kit

 

AST 5300 Series Shock Absorbers Coil Over for Toyota GR86 Subaru BRZ RAC-S6401S

• Tested on tracks like the Nürburgring, Zandvoort, Imola, Laguna Seca, Macau and many others around the world.

  All AST 5300 Series Shock Absorber adjusters work completely independent. 

  Once installed the shock absorbers are easy to setup, highly reliable and require low maintenance during the season because of the high grade of materials used. 

  • 3-Way Adjustable, separate rebound and Low & Hi Speed compression adjustable with a remote reservoir. The positions give clear feedback with each adjustment, each offering a different driving experience. 
  • Inverted strut design to cope with (heavy) side load and braking loads. 
  • In some cases the non inverted system is used.
  • Improved handling and consistent performance due to Monotube technology. 
  • Ride Height adjustable. 
  • Gas Pressurized. 
  • Including AST top mounts / camberplates. High quality, noise free.
  • Including springs. Custom springrates are available. Call to order. 

AST 5300 Series Shock Absorbers Coil Over for Toyota GR86 Subaru BRZ RAC-S6401S

STI FLEXIBLE DRAW STIFFENER RR FOR SUBARU BRZ ZD8 ST20168VR000

 

STI FLEXIBLE DRAW STIFFENER RR FOR SUBARU BRZ ZD8 ST20168VR000

1. This is a flexible draw stiffener from STI attached to the rear ends of the left and right rear frame (inside the rear bumper).

2. It will apply an appropriate tension to correct the bending of the chassis while driving, resulting in agile initial steering and supple ride. 

3. Achieve a great balance. By improving the ground contact of the four wheels, driving stability during cornering is increased and a quick and straightforward steering feeling is realized. 

* *The mounting image is an image of mounting on the Levorg (VN type) and SUBARU BRZ (ZD type).

**2021/07 onwards 

STI FLEXIBLE DRAW STIFFENER RR FOR SUBARU BRZ ZD8 ST20168VR000

FEEL'S HONDA TWINCAM BUCKET SEAT BLUE BLACK FOR FEELS-00028

 

FEEL'S HONDA TWINCAM BUCKET SEAT BLUE BLACK FOR FEELS-00028

An ergonomic bucket seat that gives you a feeling of hold and does not make you feel tired even when driving long distances. 

Confident shape memory special urethane sheet used in the demo car. 

Applicable models: ACCORD, CIVIC, CR-Z, FIT, INTEGRA, PRELUDE, S2000

Applicable models: CL1, CF4, TORNEO CL1, TORNEO CF4, CL7 EUROR, CL9, WAGON CF6, WAGON CF7, WAGON CH9, WAGON CM1, WAGON CM2, WAGON CM3, FD2 TypeR, FN2 TypeR EURO, FG2 US Coupe Si, EG1, EG2, EG4, EG6, EG9, EF8, EF9, EK4, EK9, EP3 TypeR, ZF1, ZF2, GDx , GEx, GK5, DB8, DC2, DC5 TypeR, BB6, BB8, AP1, AP2 

Product classification: Car Interior & Exterior 

Product information: 

**Please use general-purpose seat rails. 
(Non-adaptive model: PP1 / JG1 / JG2 / JW5 / NA1 / NA2 / BB1 / BB4) 

**Mounting classification: Fabric: Blue + Body: Black

FEEL'S HONDA TWINCAM BUCKET SEAT BLUE BLACK FOR FEELS-00028

BRIDE SUPER SEAT RAIL LEFT SIDE XR TYPE FOR CHEVROLET CORVETTE C7 (IYYO7) G532-XR

 

BRIDE SUPER SEAT RAIL LEFT SIDE XR TYPE FOR CHEVROLET CORVETTE C7 (IYYO7) G532-XR

Compatible Car: CHEVROLET CORVETTE C7 (IYYO7)

- Model Year: 15
- Super seat rail XR type
- Safety standard compliant model
- Made in Japan
- Seat mounting dimensions / length 260mm x width 405mm
- Main available sheets

BRIDE products: STRADIAII WIDE (former product name: STRADIAII type-XL)

BRIDE SUPER SEAT RAIL LEFT SIDE XR TYPE FOR CHEVROLET CORVETTE C7 (IYYO7) G532-XR

TOMEI BLOW OFF VALVE FOR MITSUBISHI EVO 4-6 4G63 191134

 

TOMEI BLOW OFF VALVE FOR MITSUBISHI EVO 4-6 4G63 191134

Compatible Car: Mitsubishi EVO 4-6

Compatible Engine: 4G63

NISMO had checked parameters eg: the suitable fuel setup, camshafts, compression ratio during the development of the ARMS turbines.

The right data were collected and setup with the REYTEC and TOMEI ECU. 

It was found that the best balance not only for the engine bench dyno but also for the daily driven Sports car use. 

The data collected during R&D proved to be the best balanced all round performance for street use, event days from Time Attack to Drift- all after being analyzed from data logging.

APPLICATION: EVO 4-6

TOMEI BLOW OFF VALVE FOR MITSUBISHI EVO 4-6 4G63 191134

M&M HONDA REAR TRAILING ARM REINFORCED RUBBER BUSH KIT HARDRACE FOR HONDA CIVIC FL5 00800-FL5-M003

 

M&M HONDA REAR TRAILING ARM REINFORCED RUBBER BUSH KIT HARDRACE FOR HONDA CIVIC FL5 00800-FL5-M003

Compatible Car: HONDA CIVIC FL5

1. This is HARDRACE rear trailing arm reinforced rubber bush KIT for Honda Civic FL5.

2. Utilize a hardened rubber bush made of high-strength, a hard-to-crack rubber material.

3. It will gives firm steering response and driving suspension; work well on slopes during cornering at high speeds. 

4. It will reduce vibration and provides better stability, contributing to better steering response and improve performance accordingly.

M&M HONDA REAR TRAILING ARM REINFORCED RUBBER BUSH KIT HARDRACE FOR HONDA CIVIC FL5 00800-FL5-M003

REINHARD CANNONBALL MUFFLER SEMI TITANIUM EXHAUST FOR TOYOTA SUPRA JZA80 TB 2JZ-GTE RH-1010TI

 

REINHARD CANNONBALL MUFFLER SEMI TITANIUM EXHAUST FOR TOYOTA SUPRA JZA80 TB 2JZ-GTE RH-1010TI

Compatible Car: TOYOTA SUPRA JZA80 TB

Compatible Engine: 2JZ-GTE

Year: 93.05~97.08 EXP: 76.3Φ Specifications Tail size: 145Φ shell Single 115Φ Type: For competition Material: Semi-titanium

REINHARD CANNONBALL MUFFLER SEMI TITANIUM EXHAUST FOR TOYOTA SUPRA JZA80 TB 2JZ-GTE RH-1010TI

NISMO SUPER COPPERMIX TWIN COMPETITION CLUTCH FOR SKYLINE GT-R BNR32 93/2- BCNR33 RB26DETT 3002B-RR598-C

 

NISMO SUPER COPPERMIX TWIN COMPETITION CLUTCH FOR SKYLINE GT-R BNR32 93/2- BCNR33 RB26DETT 3002B-RR598-C

Compatible Vehicle: Skyline GT-R BNR32 93/2- BCNR33

Compatible Engine: RB26DETT

1. This is a super-strong clutch that improve operations and performance with an output ceiling of more than 600ps.

2. This is the development concept of SUPER COPPERMIX TWIN. NISMO first floated this concept as a carbon twin product. 

3. Two years into its development, the NISMO decided that the low μ of carbon facings could not match the performance that COPPERMIX promised. 

4. NISMO then developed the twin discs using COPPERMIX. The SUPER COPPERMIX TWIN eat up three and a half years of testing and development. 

5. It is indeed the ultimate model in the NISMO multi-plate clutch series.

Kit contents
· Flywheel bolt
· Release bearing (Nissan genuine parts)
· Center hub
· Copper mix clutch disc × 2
· Aluminum clutch cover
· Light weight flywheel
· Aluminum center plate
· Sticker

Allowable torque N・m (kgf・m) Kinetic friction: 951 (97)

Allowable torque N・m (kgf・m) Static friction: 1618 (165)

Allowable output kW (ps): 574 (780)

Clutch cover Pressure N (kgf): 11278 (1150)

Clutch cover Type: Pull

Weight SUPER COPPERMIX TWIN: 16.54

Weight Genuine part: 18.62

NISMO SUPER COPPERMIX TWIN COMPETITION CLUTCH FOR SKYLINE GT-R BNR32 93/2- BCNR33 RB26DETT 3002B-RR598-C

NAGISA AUTO GACCHIRI SUPPORT FRONT FENDER BRACE FOR TOYOTA SUPRA JZA80 92766307971

 

NAGISA AUTO GACCHIRI SUPPORT FRONT FENDER BRACE FOR TOYOTA SUPRA JZA80 92766307971

[Material] Made of steel

[Production method] NAGISA AUTO introduced 3D CAD and overlapping simulations to accurately measure the layout of each car model.

NAGISA AUTO had achieved high quality using the NC laser cutting method and low prices through mass production.

[Patented] Patent No. 3534094

[Characteristics] 

- Due to the lowering and installation of large-diameter wheels (low-height tires), an unexpected shock is applied to the front frame, but by installing solid supports, the body rigidity is improved. 

- This will prevent distortion or deterioration of the vehicle body. 

- This is a necessary part for cars equipped with low-down and large diameter wheels.

NAGISA AUTO GACCHIRI SUPPORT FRONT FENDER BRACE FOR TOYOTA SUPRA JZA80 92766307971

LAILE BEATRUSH HEAVY DUTY GEARBOX MOUNTING FOR IMPREZA VAB GRB GVB GDB S146016BC-B

 

LAILE BEATRUSH HEAVY DUTY GEARBOX MOUNTING FOR IMPREZA VAB GRB GVB GDB S146016BC-B

Compatible Car: 

IMPREZA VAB GRB GVB GDB

Specifications: 
Material: Steel & Urethane (Hardness 90)
Installation: Bolt on

By changing from genuine rubber to urethane, it reduces the movement of the mission, prevent shift omission, greatly improve the rigid feeling and operability of the shift change.

CAUTION :

※This item is prohibited or restricted to use on the general way by some countries and areas.

※Please use with the national law. No compensation for damages due to accident related to this item at all.

※When replace with this product, vibration and sound from the engine will be more easily transmitted.

LAILE BEATRUSH HEAVY DUTY GEARBOX MOUNTING FOR IMPREZA VAB GRB GVB GDB S146016BC-B