PROJECT MU SCR FRONT GREEN 1PIECE BRAKE ROTORS FOR HONDA CIVIC TYPE-R FK8 BREMBO SCRH132

 

PROJECT MU SCR FRONT GREEN 1PIECE BRAKE ROTORS FOR HONDA CIVIC TYPE-R FK8 BREMBO SCRH132

This is a middle class model that uses FC cast iron material. 

It was developed in-house with improved thermal stability and durability for greater performance.

The fins have an original radiant shape to enhance the heat dissipation effect. 

It can be used in a wide range from street to circuit driving. 

Structure: 1Piece 
Material: High alloy FC cast iron 
Slit: Straight shape / 8 on one side, 16 on both sides

PROJECT MU SCR FRONT GREEN 1PIECE BRAKE ROTORS FOR HONDA CIVIC TYPE-R FK8 BREMBO SCRH132

HKS CARBON BRACE FRONT SET FOR TOYOTA GR SUPRA DB02 DB42 DB22 DB82 83001-AT002

 

HKS CARBON BRACE FRONT SET FOR TOYOTA GR SUPRA DB02 DB42 DB22 DB82 83001-AT002

HKS CARBON BRACE is a joint project with Graphite Design, which boasts the No. 1 usage rate for golf carbon shafts and tour pros. 

It is a brace bar that aims to achieve both ride comfort. In general braces, the strength is secured by adding the mounting part, but there are some braces that have too large interior holes due to passing round pipes.

HKS Carbon Brace Front Set has one more mounting part compared to other companies' products and by providing an inner lid, it can be replaced smoothly.

The interior of the engine compartment and the interior of the rear compartment are made of carbon material, giving it a luxurious finish and it is a product that combines functionality and dress-up effect. 

The brackets on both ends are machined aluminum and with colorless anodized finish to give the beauty and corrosion resistance, with laser-engraved HKS brand logo.

HKS CARBON BRACE FRONT SET FOR TOYOTA GR SUPRA DB02 DB42 DB22 DB82 83001-AT002

 

Corsa 10-14 Audi B8 Black Sport 2.5in Cat-Back Dual Rear Exit Black PVD Polished Pro-Series Tips cor14543BLK

CORSA Performance Cat-Back Exhaust will enhance your Audi B8 driving experience at once. 

It will gives an aggressive performance sound with systems are all acoustically styled and engineered with specific harmonics to your Audi B8. 

There will be  “No Drone” effect with RSC™ technology that eliminates "problem" frequencies that cause interior drone/ resonance at cruising speeds. 

It will improve Horsepower and Torque with patented non-restrictive Straight-Through design that reduces back pressure and frees up additional power. 

Less back pressure and more power means your B8 engine functions more efficiently that translates into better fuel economy 

Utilized premium 304L Stainless Steel material for longer lasting and quality.

Comes with Limited Lifetime Warranty with all necessary hardware and full color instructions.

Corsa systems come with top quality TORCA Clamps, that are also 304SS with instructions for an easy installation.

Corsa systems are all designed to install rearward of the factory catalytic converter with no emissions hassles. 

Just bolt it on and go. Handcrafted in the USA, manufactured in Berea OH, USA.

Corsa 10-14 Audi B8 Black Sport 2.5in Cat-Back Dual Rear Exit Black PVD Polished Pro-Series Tips cor14543BLK

ENDLESS RACING MONO6 SYSTEM INCH UP KIT FRONT FOR PORSCHE 911 997 GT3 RS EEZ6MX973RS

 

ENDLESS RACING MONO6 SYSTEM INCH UP KIT FRONT FOR PORSCHE 911 997 GT3 RS EEZ6MX973RS

Rotor (Dia/Thick): 380x34 (2PCS)
Pad: RCP121

"High rigidity" and "light weight" was proven by this forged monoblock Monoblock caliper "RacingMONO6" - forged with thousands of tons of pressure. 

Four years after conception and one year after the completion of the prototype, ENDLESS repeatedly put the car into test races and changed the specifications many times to suite to the real requirements.

The processing of the highly difficult piston cylinder is done by using advanced special technology. 

The finalized body is finished with super hard alumite treatment. It is the crystallization technology process created by ENDLESS's "endless challenge" that during forging.

Kit contents (main):

Caliper body (ultra-hard alumite) 

Exclusive caliper brake pads 

Mounting bracket 

Large diameter brake rotor 

Brake line for caliper 

Caliper body color: Super hard alumite

ENDLESS RACING MONO6 SYSTEM INCH UP KIT FRONT FOR PORSCHE 911 997 GT3 RS EEZ6MX973RS

GREDDY BLOW OFF VALVE FV2 FOR TOYOTA 86 ZN6 11511217

 

GREDDY BLOW OFF VALVE FV2 FOR TOYOTA 86 ZN6 11511217

YEAR MODEL: April 2012-Jul 2016 
Engine Model: FA20 

YEAR MODEL: August 2016- 
Engine Model: FA20 

The Greddy Blow-Off Valve Fv2 INHERITS THE FLOATING valve structure that was popular with the previous model, while improving its sophisticated design, maintainability, and reliability.

A fidget spinner is used to adjust the spring preload without tools, and the hose union take-out direction of the top cover can be adjusted 360 ° without tools.

The mounting flange and opening have the same dimensions as the GReddy blow-off valve TYPE-RS, RZ, and FV, and can be replaced from the conventional model.

- Top cover: Machined aluminum (silver) with 360 ° rotation function 

- Spring adjustment: Aluminum machined hand spinner specification 

- Body body: Aluminum die-cast (chrome plated) · Dual valve spring 

- Valve: 40φ machined aluminum hard alumite with support spring split structure

GREDDY BLOW OFF VALVE FV2 FOR TOYOTA 86 ZN6 11511217

GRUPPEM K&N GENUINE REPLACEMENT FILTER FOR FORD MUSTANG 33-5029

 

GRUPPEM K&N GENUINE REPLACEMENT FILTER FOR FORD MUSTANG 33-5029

Product category: Genuine replacement filter

Filter shape / size: Special panel-Long side 288 x Short side 264 mm 

This is a genuine replacement type air filter that maximizes the characteristics of the genuine cleaner BOX that is not affected by the heat in the engine room.

Compatible Engine: 
Code: VII 
Displacement: 2.3 L 
Grade / Specifications: TURBO 
Genuine part number: FA1918 
Product brand: K & N 

The filter medium uses a unique wet cotton 4-layer filter that has a proven track record and is reliable over many years of racing. 

Achieves excellent response and performance improvement by achieving both suction resistance and filtration performance at a high level. 

It can be used repeatedly by cleaning with the separately sold maintenance kit for K & N (part number 99-5000).

GRUPPEM K&N GENUINE REPLACEMENT FILTER FOR FORD MUSTANG 33-5029

SPOON DRIVE SHAFT SET FOR HONDA CIVIC FL5 K20C 42300-FL5-C00

 

SPOON DRIVE SHAFT SET FOR HONDA CIVIC FL5 K20C 42300-FL5-C00

The drive shaft is the cornerstone of power transmission. 

The drive shaft of a front-wheel drive vehicle needs to transmit torque while giving a large angle to turn while transmitting driving force to the wheels. 

As a result, a very large load was applied to the joints, which often caused problems during races. 

One of the countermeasures for troubles in the race is the mirror finish of the joint. 

Before machining, the surface of the metal is covered with small scratches.

If these small scratches continue to receive driving torque, then stress concentration will occur, causing cracks, breakage and seizure. 

**By removing burrs from each part and polishing it, the starting points of cracks are eliminated and damage is prevented. This mirror finishing process improves durability. 

**In addition, by using grease with high heat resistance and extreme pressure for joints, it can withstand high load driving such as circuit driving. 

**A drive shaft that improves durability and moves smoothly with little resistance is the key for the top performers.

SPOON DRIVE SHAFT SET FOR HONDA CIVIC FL5 K20C 42300-FL5-C00

CUSCO ROLL CAGE D1 FOR HONDA CIVIC FERIO EG8 EG9 (SUNROOF EX) 310 261 A

 

CUSCO ROLL CAGE D1 FOR HONDA CIVIC FERIO EG8 EG9 (SUNROOF EX) 310 261 A

HONDA Civic Ferio EG8 EG9 (sunroof Ex)

Roll bar type: Capacity roof 
Rear cross pillar stop: - 
Score: 4 
Seating capacity: 4 people 
front shape: - 
Rear Bar mounting position: A

CUSCO ROLL CAGE D1 FOR HONDA CIVIC FERIO EG8 EG9 (SUNROOF EX) 310 261 A

PROJECT MU RACING RACING999 FRONT BRAKE PADS WITHOUT SENSOR FOR PORSCHE 911 997 GT3 Z351-RACING999

 

PROJECT MU RACING RACING999 FRONT BRAKE PADS WITHOUT SENSOR FOR PORSCHE 911 997 GT3 Z351-RACING999

Grade and Year Model: 
09/05~ 997M9777

Developed in response to testing in GT races, RACING999 brake pads offer absolute braking capacity and fade-resistance.

Material: Super graphite metallic, 

Applicable Rotor Temperature: 200-800C, 

Friction Coefficient: 0.42-0.59u

PROJECT MU RACING RACING999 FRONT BRAKE PADS WITHOUT SENSOR FOR PORSCHE 911 997 GT3 Z351-RACING999

RESULT JAPAN REAR WING FOR TOYOTA GR86 ZN8

 

RESULT JAPAN REAR WING FOR TOYOTA GR86 ZN8

1. This is a beautiful Rear Wing for GR86 & new BRZ. 

2. For mounting, to make 3 holes on each side of the trunk and fix it with bolts. 

3. This product is FRP black gel specification, so it needs to be painted separately. 

4. Unpainted products are manufactured on the premise of painting, so small scratches etc. may be observed, will be shipped-out as they are. 

5. It is made to order as there is no stock kept.

6. Regarding vehicle inspections, to check the regulation and requirements for each state/ prefecture.

 
7. Please note that you cannot cancel your order. 

8. Aero parts, carbon products, etc. are carefully handmade and manufactured. It may take some time to complete before delivery. 

9. For product installation, painting, processing, etc., RESULTJAPAN recommend that you use a specialist (car shop, sheet metal shop, maintenance shop, etc.). 

10. You may check notes on handling aero products at website: 
https://www.resultjapan.com/blank-3

RESULT JAPAN REAR WING FOR TOYOTA GR86 ZN8

REIMAX TITANIUM MUFFLER SYSTEM DOUBLE FOR NISSAN SKYLINE GT-R R33 17400-ATW01-33

 

REIMAX TITANIUM MUFFLER SYSTEM DOUBLE FOR NISSAN SKYLINE GT-R R33 17400-ATW01-33

Reimax go with lightness, quietness and great performance as a muffler for GT-R R33.

The straight structure is not only efficient but also amazingly quiet with weight of only 11.5kg.

[Single] Main diameter: 80φ / Outlet diameter: 115φ

[Double] Main diameter: 80φ / Outlet diameter: 80φ×2

Material: Titanium

Proximity exhaust noise: Approx. 93-96dB when installed

Compatibility: BCNR33

REIMAX TITANIUM MUFFLER SYSTEM DOUBLE FOR NISSAN SKYLINE GT-R R33 17400-ATW01-33

OKUYAMA OKUYAMA ROLL CAGE STEEL 8P FOR INCLUDING BMW E36 M3 721-717-2

 

OKUYAMA OKUYAMA ROLL CAGE STEEL 8P FOR INCLUDING BMW E36 M3 721-717-2

OKUYAMA Roll bar Steel 
8P No.8 Dashboard escape type 

Number of doors: 2 doors 
Roof: Sunroof 
B pillar: B pillar stop 
For left-hand drive vehicles only. 

The color will be black with powder coating. 
White +13,750 yen (tax included), Silver +17,600 yen (tax included) can be manufactured. 

You may add the color under the "Products you ordered" column of the product purchase form and place an order. 
Number of points: 8P 
No .: 8 
2 people / Capacity: 2 people

Note: * B-pillar stopper may not be attached to some models.

OKUYAMA OKUYAMA ROLL CAGE STEEL 8P FOR INCLUDING BMW E36 M3 721-717-2

OSGIKEN STREET MASTER TWIN CLUTCH KIT HARD FOR BMW M3 E92 S65B40A GT2CD-E92

 

OSGIKEN STREET MASTER TWIN CLUTCH KIT HARD FOR BMW M3 E92 S65B40A GT2CD-E92

Year: - not specified

TYPE: Street Master Hard 

Number of discs: Twin disc type 

Disc diameter size: 215mm 

Other indications: Disc type with damper demonstrates strong transmission ability during sports driving, but operates the same as standard during general driving.

Sleeve bearings are included. F/W bolt is required.

OSGIKEN STREET MASTER TWIN CLUTCH KIT HARD FOR BMW M3 E92 S65B40A GT2CD-E92

TOMS MONOBLOCK GT CALIPER KIT RED REAR FOR TOYOTA SUPRA JZA80 43052-TJA80

 

TOMS MONOBLOCK GT CALIPER KIT RED REAR FOR TOYOTA SUPRA JZA80 43052-TJA80

COLOR: RED 
CALIPER SPECS: MONO BLOCK 4 POT (M4) 
ROTOR SPECS: 380X28MM 2 PIECES

1. This is a High-Rigidity monoblock caliper.
Aluminum monoblock caliper was used to get a high rigidity and light weight to create a powerful stopping power.

2. The piston diameter has been increased with the front caliper has a 6-pot and the rear caliper has a 4-pot. 

3. This is a Large-Diameter drilled brake rotor:  Uses a large-diameter rotor that generates powerful stopping power. 

4. TOMS had a lineup of 4 sizes of 345 / 355 / 380 / 405mm according to the vehicle class. 

5. In order to reduce the weight due to the large diameter, TOMS adopted a two-piece structure with an aluminum bell housing.

6. In addition to this great design, high heat dissipation is ensured by using a drilled rotor.

TOMS MONOBLOCK GT CALIPER KIT RED REAR FOR TOYOTA SUPRA JZA80 43052-TJA80

ZELE FRP FRONT DIFFUSER FOR TOYOTA 86 ZN6 ZELE-00004

 

ZELE FRP FRONT DIFFUSER FOR TOYOTA 86 ZN6 ZELE-00004

The ZELE front diffuser is an exterior part designed for sports driving with a design that follows the ZELE brand's elegant image that flourishes in the street scene. 

It is designed to extend 40mm further forward than the ZELE front lip spoiler, lift the center, and create steps on both sides to create a rectifying effect and generate stronger downforce. 

The material lineup is carbon fiber and FRP, an unpainted product. For painted products, separate conversation is required.

ZELE FRP FRONT DIFFUSER FOR TOYOTA 86 ZN6 ZELE-00004