JUN AUTO REAR SIDE DIFFUSER CARBON FOR TOYOTA GR86 ZN8 SUBARU BRZ ZD8 8014M-F002

 

JUN AUTO REAR SIDE DIFFUSER CARBON FOR TOYOTA GR86 ZN8 SUBARU BRZ ZD8 8014M-F002

JUN AUTO Rear Side Diffuser is installed under both sides of the genuine rear bumper. 

Suppresses turbulence behind the tyres and rectifying plates on the left and right to allow the air on the sides to flow smoothly to the rear. 

The ground clearance is 25mm lower than the lower surface of the genuine rear bumper.

JUN AUTO REAR SIDE DIFFUSER CARBON FOR TOYOTA GR86 ZN8 SUBARU BRZ ZD8 8014M-F002

LAILE BEATRUSH UNDER PANEL FOR LANCER EVO 8 9 CT9A LANCER EVO WAGON CT9W S530570

 

LAILE BEATRUSH UNDER PANEL FOR LANCER EVO 8 9 CT9A LANCER EVO WAGON CT9W S530570

Beatrush Under Panel enhances downside rectification at high speed and generates down force. 

It also restrain the air stream from getting caught in the engine room to inhibit the engine from over heating.

Specifications: 
UNDER PANEL:t=2.0mm Aluminum
Bracket:Aluminum
Weight:6.0 kg
Installation: 
Bolt on.

LAILE BEATRUSH UNDER PANEL FOR LANCER EVO 8 9 CT9A LANCER EVO WAGON CT9W S530570

REVOLUTION LIGHTWEIGHT PULLEY SET FOR TOYOTA 86 SUBARU BRZ ZN6 ZC6 RZN6-LPST

 

REVOLUTION LIGHTWEIGHT PULLEY SET FOR TOYOTA 86 SUBARU BRZ ZN6 ZC6 RZN6-LPST

It is a pulley that is concerned with the speed of engine blow-up. Recklessly reducing the weight will improve the response, but the disadvantage is that the torque will become thinner and it will be difficult to ride. 

REVOLUTION set the weight based on the theme that the car tuned for the street will also run on the circuit. It is a weight setting unique to our company that performs various tests. 

The kit includes a crank pulley, a water pump pulley, two tension pulleys and an alternator pulley. 

The total weight is 1400g. 

*Reference installation time 1.2 hours
Since it is only a reference installation time at our company, please consider it as a guideline.

REVOLUTION LIGHTWEIGHT PULLEY SET FOR TOYOTA 86 SUBARU BRZ ZN6 ZC6 RZN6-LPST

JUN AUTO RACING VALVE GUIDE FOR NISSAN VR38DETT 1008M-N009

 

JUN AUTO RACING VALVE GUIDE FOR NISSAN VR38DETT 1008M-N009

JUN AUTO had prepared two kind of valve guide:

1. A strengthening part made of the PBB which is suitable for the tuning engine. 

2. The valve guide made of cast iron which is same as stock specification.

In the case of tuned engine, the heat and mechanical load by high rotation is more extensive than stock. Stock valve guide may damage. 

The JUN AUTO Racing Valve Guide improved its strength and heat dissipation by using raw material, phosphorus-bronze. This will avoid any damage from high rotation from tuned engines.

For the cast iron valve guide, JUN AUTO kept quality but cheaper than stock valve guide which is rather expensive lately. 

JUN AUTO recommend these valve guides when you overhaul your cylinder head.

Material: PBB

JUN AUTO RACING VALVE GUIDE FOR NISSAN VR38DETT 1008M-N009

IKEYA FORMULA TIE ROD END FOR SUBARU IMPREZA GC8 IFAN16011

 

IKEYA FORMULA TIE ROD END FOR SUBARU IMPREZA GC8 IFAN16011

IKEYA Formula Tie Rod End is a product that:

1. Corrects geometry change due to suspension bump steering

2. Optimize steering feel

3. Improve grounding rigidity of front tyres

In addition, the optimization reduces the burden on the tie rods and produces a sharp steering response. 

*Bump steer correction amount 20mm 

*Genuine vehicle height cannot be installed 

☆Repair parts 

・Knuckle bolt set (pillow ball not included) ¥9,600 (for 1 vehicle, tax excluded) 

・Tie rod end pillow ball replacement (current product: MBYT15) Parts fee included ¥14,400 (1 unit, tax excluded) 

・Pillow ball bushing only (Current product: MBYT15) ¥12,000 (1 unit, tax excluded) 

・Pillow ball inner diameter 14 mm (MBYT14) is no longer available

IKEYA FORMULA TIE ROD END FOR SUBARU IMPREZA GC8 IFAN16011

PROJECT MU BRAKE ROTOR SCR-PRO 2PIECES GREEN FOR MAZDA ROADSTER ND5RC GPRZ035

 

PROJECT MU BRAKE ROTOR SCR-PRO 2PIECES GREEN FOR MAZDA ROADSTER ND5RC GPRZ035

Compatible Car: MAZDA ROADSTER ND5RC

This is a model that uses a two-piece structure with excellent durability, heat resistance and heat dissipation. 

Project MU used high alloy high carbon FC cast iron to greatly improve on crack resistance. 

In addition, with the exception of some models, Project MU also had achieved a significant weight reduction from the genuine product.

Remark: Fits models with Brembo brakes as well

PROJECT MU BRAKE ROTOR SCR-PRO 2PIECES GREEN FOR MAZDA ROADSTER ND5RC GPRZ035

GARAGEMAK AERO FRONT BUMPER FRP FOR TOYOTA FT86 ZN6 AERO GARAGEMAK-00001

 

GARAGEMAK AERO FRONT BUMPER FRP FOR TOYOTA FT86 ZN6 AERO GARAGEMAK-0000

Compatible car: TOYOTA FT86 ZN6 AERO

Retainers need to be machined.

GARAGEMAK AERO FRONT BUMPER FRP FOR TOYOTA FT86 ZN6 AERO GARAGEMAK-00001

SYMS AERO FENDER CARBON FOR TOYOTA 86 ZN6 SUBARU BRZ ZC6 Y3000ZC004

 

SYMS AERO FENDER CARBON FOR TOYOTA 86 ZN6 SUBARU BRZ ZC6 Y3000ZC004

Aero fenders for BRZ/86 are now available from SYMS AERO.

By expelling the air coming from the underside of the front from the rear of the tire, the pressure in the tire house is reduced thus reducing lift. 

An elegant design and aerodynamics are combined at a high level.

SYMS AERO FENDER CARBON FOR TOYOTA 86 ZN6 SUBARU BRZ ZC6 Y3000ZC004

CAR MAKE T&E [ ISM] RB1,2 ODYSSEY ABSOLUTE FULLKIT (3-PIECE KIT) FOR CARMAKETE-02419

 

CAR MAKE T&E [ ISM] RB1,2 ODYSSEY ABSOLUTE FULLKIT (3-PIECE KIT) FOR CARMAKETE-02419

This new design including side steps has improved the Odyssey Absolute style, which has a simple body shape with a sleek and sporty appearance.

A half type is adopted for both the front and rear, creating a series of flows from the front to the rear with a sporty and elegant styling.

It is designed to extend the lower surface of the aero parts to reduce air resistance and to realize performance in invisible parts.

CAR MAKE T&E [ ISM] RB1,2 ODYSSEY ABSOLUTE FULLKIT (3-PIECE KIT) FOR CARMAKETE-02419

TOMS STYLING PARTS SET BLACK PEARL 219 FOR TOYOTA HARRIER MXUA80 85 50000-TAU80-B2

 

TOMS STYLING PARTS SET BLACK PEARL 219 FOR TOYOTA HARRIER MXUA80 85 50000-TAU80-B2

The Harrier has a strong and elegant form, adds a sports taste that unique to Tom's. 

The design, which is based on the aerodynamic concept of the latest racing cars, perfectly matches the Harrier's teardrop-shaped body. 

Sporty and elegant styling with a wide and low form with impact was realized. 

TOMS STYLING PARTS SET BLACK PEARL 219 FOR TOYOTA HARRIER MXUA80 85 50000-TAU80-B2

J'S RACING AIR INTAKE DUCT FOR HONDA CIVIC FD2 K20A AID-D2

 

J'S RACING AIR INTAKE DUCT FOR HONDA CIVIC FD2 K20A AID-D2

Engine: K20A

Material: FRP 

Fresh air can be actively introduced by attaching it to the duct part of the genuine bumper! 

It is possible to increase the suction efficiency of the brake duct by about 80%. 

Both performance and dress-up performance. 

Installation is possible only with strong double-sided tape (no drilling required) 

● Left and right set for one unit 
Made of FRP, black gel coat finish, double-sided tape included.

J'S RACING AIR INTAKE DUCT FOR HONDA CIVIC FD2 K20A AID-D2

SPOON CARBON AIR DUCT INTAKE FOR HONDA S2000 AP1 17228-AP1-000

 

SPOON CARBON AIR DUCT INTAKE FOR HONDA S2000 AP1 17228-AP1-000

During the endurance race, a phenomenon occurs at that time makes the engine power become less effective and deteriorate.

The cause are due to: 

(1) Intake air temperature rise.

(2) Correction function due to water temperature rise. 

Therefore, SPOON installed a duct for forcibly sucking in from the bumper part and exchanged it with a large aluminum radiator.

During testing, there was no change in the engine power and effectiveness. 

Installation is straight forward with an ideal shape without any modification with S-Tai bonnet, bumper exclusive use product, 60100-AP1-S01.

SPOON CARBON AIR DUCT INTAKE FOR HONDA S2000 AP1 17228-AP1-000

ARC BRAZING SUPER INDUCTION BOX FOR TOYOTA FT86 FR-S ZN6 1T401-AA001

 

ARC BRAZING SUPER INDUCTION BOX FOR TOYOTA FT86 FR-S ZN6 1T401-AA001

Compatible model: ZN6

Engine: FA20

The ARC Brazing Super Induction box was designed for a low and medium operations aims to improve the high-speed engine response.

Gives great advantage by located in the funnel effect. It will prevent a negative pressure generated between the accelerator ON / cleaner during OFF and the intake manifold.

The ARC Brazing Super Induction box ensures good response in rectifying effect of the intake air. It can be mounted in the bolt. 

ARC BRAZING SUPER INDUCTION BOX FOR TOYOTA FT86 FR-S ZN6 1T401-AA001

ARC BRAZING TITANIUM SHIFT KNOB FOR MULTI FITTING 19002-AA029

 

ARC BRAZING TITANIUM SHIFT KNOB FOR MULTI FITTING 19002-AA029

This is an awesome ARC Brazing titanium shift knob for multi fitting.

Designed with an appropriate weight to excel, precisely cut for a greater accuracy shifting operations. 

In addition, titanium unique beautiful color will light up cockpit presence. 

PITCH: M10 1.25, 

TYPICAL CAR MODELS: (except 6F) Silvia, (except 6F) skyline, Evo (SST Allowed), RX7, roadster, other

ARC BRAZING TITANIUM SHIFT KNOB FOR MULTI FITTING 19002-AA029

HKS SPORTS TURBINE KIT FOR SUBARU IMPREZA GRB EJ20 TURBO 11004-AF013

 

HKS SPORTS TURBINE KIT FOR SUBARU IMPREZA GRB EJ20 TURBO 11004-AF013

Model: GRB
Model Year: 07/10-14/08
Type: GT III SPORTS TURBINE KIT
Turbine Size: GTIII-RS
Boost Pressure: 88.3kPa (0.9kgf/cm2)

"GT III Turbine" is a new generation of turbo combining the latest design MHI high performance CHRA with HKS original housings, great for Subaru Impreza GRB EJ20.

It was designed from the long term experience HKS has accumulated over many years. 

The HKS GT III Sports Turbine stands out due to its cutting-edge technology, superior engineering and focus on balanced performance. 

Here are the key features that make it better than others in many applications:

1. Advanced Design and Materials

High-Flow Compressor Wheel: The GT III series features advanced compressor wheel designs, such as billet or forged materials, ensuring durability and high efficiency.

Improved Aerodynamics: The turbine and compressor blades are designed for maximum airflow while minimizing turbulence, resulting in faster spool times and higher power output.

Lightweight Construction: Use of advanced alloys reduces weight, improving response time and minimizing thermal stress.

2. Optimized for Street and Track

Balanced Power Delivery: Designed to offer both low-end torque and high-end horsepower, making it ideal for a wide range of driving scenarios, including daily driving, spirited street runs, and track days.

Quick Spooling: Faster turbo spool-up ensures reduced turbo lag, allowing for smoother and more immediate throttle response compared to some competing models.

3. High Efficiency and Reliability

Heat Resistance: Equipped with advanced turbine housings that withstand extreme temperatures, ensuring durability under high-stress conditions.

Improved Lubrication: Features robust oil and coolant passages that optimize heat dissipation and lubrication, extending the turbo’s lifespan.

4. Vehicle-Specific Applications

HKS develops its GT III turbos with precise engineering tailored to specific vehicles, ensuring seamless integration and performance tuning.

Bolt-on compatibility with popular performance cars not only for Subaru EJ20 but also for Nissan GT-R, Toyota Supra, Mitsubishi Lancer Evolution and others.

5. Broad Power Range

Available in a variety of sizes and trims, the GT III Sports Turbine is versatile enough to meet different power goals—from moderate street builds to high-performance track cars.

6. HKS Quality and Support

Renowned for stringent quality control and innovative engineering, HKS turbos are trusted by enthusiasts and professionals worldwide.

Comes with comprehensive documentation and support for tuning, ensuring optimal results.

7. Aftermarket Tuning Potential

Compatible with HKS tuning parts like exhausts, intercoolers, and fuel systems, allowing for cohesive and maximized performance upgrades.

Overall, the HKS GT III Sports Turbine is an excellent choice for enthusiasts looking for a turbocharger that combines reliability, advanced technology, and high performance with exceptional tuning flexibility.

HKS SPORTS TURBINE KIT FOR SUBARU IMPREZA GRB EJ20 TURBO 11004-AF013