Anderson Composites DRY CARBON HOOD FORD SHELBY GT350 2015-2020 AC-HD15FDMU350-CR-DRY

1. Anderson Composites 2015 - 2020 SHELBY GT350 & GT350R DRY CARBON FIBER HOOD Type-CR

2. Fits Shelby GT350 & GT350R only

3. ALL DRY CARBON PRODUCTS ARE MATTE FINISH

4. Autoclave process with pre-preg 3K, 2x2 twill carbon fiber cloth, matte finish

5. Anderson Composites DRY carbon does not have UV protection, it is recommended to have it coated with an automotive grade clear coat with UV inhibitors if you do not plan to paint or wrap the part.

6. Design is track day inspired, improved heat extraction for better performance.

7. Center vent measures 20"w x 23"l, side vents measure 8"w x16"l.

8. Mounts with OE hardware

9. All hoods require hood pins for safety reasons. Anderson Composites will not be liable for any damages to the product and the vehicle caused by not properly using hood pins - AeroCatch or Quick-Latch.

10. Heat shield required. Anderson Composites does not suggest re-installing gas shocks/dampers/struts. The use of a hood prop rod is highly recommended.

11. Hoods are hand crafted and weigh approximately 20.8 lbs. (stock hood weighs 31 lbs.)

12. Shipped via ground truck freight only

Anderson Composites DRY CARBON HOOD FORD SHELBY GT350 2015-2020 AC-HD15FDMU350-CR-DRY

 

Tanabe Sustec Front Strut Tower Bar for Toyota GR Supra '20-'21 tanTTB205F

1. The new Tower Bar Plus has an increased cross-section area of about 16% compared to Tanabe's original Tower Bar with the torsional rigidity of the shaft increased by about 138%.

2. The strut tower bar is one of the most cost-efficient upgrades that can be added to any vehicle. 

3. Providing a very high degree of benefit in handling and stability that is felt immediately after installation, it is often one of the first modifications performed on a vehicle. 

4. By physically connecting the strut towers and radiator support, the tower bar increases rigidity in that area, allowing the damping system to work as designed and minimizing changes in suspension geometry. 

Tanabe Sustec Front Strut Tower Bar for Toyota GR Supra '20-'21 tanTTB205F

TODA RACING HYBRID PEDAL KIT FOR CIVIC TYPER K20A 17800-FD2-000

 

TODA RACING HYBRID PEDAL KIT FOR CIVIC TYPER K20A 17800-FD2-000

1. Hybrid pedal kit, designed to be used with Toda Sports Injection KIT, replaces "Drive-by-wire" with conventional throttle cable.

2. The accelerator sensor of a standard system can be used together.

Engine Type: K20A (FD2)

TODA RACING HYBRID PEDAL KIT FOR CIVIC TYPER K20A 17800-FD2-000

OKUYAMA DASH ROLL CAGE STEEL 11P FOR MAZDA ROADSTER NA6CE NA8C 739-401-0

 

OKUYAMA DASH ROLL CAGE STEEL 11P FOR MAZDA ROADSTER NA6CE NA8C 739-401-0

DASH roll bar made of steel 
11P No.14 Dashboard escape type 
Number of doors: 2 doors 
Roof: Soft top 
B pillar: No B pillar stop 
Soft top / hard top installation Yes. 
The color will be black with powder coating. 

OKUYAMA DASH ROLL CAGE STEEL 11P FOR MAZDA ROADSTER NA6CE NA8C 739-401-0

GRUPPEM DOUBLE WING FOR RACE FOR PORSCHE 911 (993) GT2 HOOD RS DWRC-993EX

 

GRUPPEM DOUBLE WING FOR RACE FOR PORSCHE 911 (993) GT2 HOOD RS DWRC-993EX

1. Compatible Car: PORSCHE 911 (993) GT2 HOOD RS

2. GruppeM Original Aero Parts -MADE IN JAPAN- 
- Manufacturer: GruppeM 
- Brand: GroupM GruppeM 
- Material: CFRP Carbon Clear Gel Coat Finish 

3. Kit Contents: Main Double Wing, Wing Tip Board, extension plate

 * Race-only parts. * Extension plate is made of dry carbon

GRUPPEM DOUBLE WING FOR RACE FOR PORSCHE 911 (993) GT2 HOOD RS DWRC-993EX

HKS BASE KIT FRP AND CARBON FOR NISSAN FAIRLADY Z RZ34 VR30DDTT 53004-AN001

 

HKS BASE KIT FRP AND CARBON FOR NISSAN FAIRLADY Z RZ34 VR30DDTT 53004-AN001

1. Kit Contents: 1. Front Spoiler, 2. Front Fender, 3. Rear Fender, 4. Side Skirt 

2. CARBON is used for the red parts in the image. The rest of the parts are FRP.

3. Fairlady Z RZ34 VR30DDTT Year Model: 22/04- 

4. Adopts Concept Running wide body kit while inheriting the HKS racing style, the design brings GT cars to the street. 

5. Since this vehicle can fit wide tires on the rear in its original condition, it is not made extremely wide.

6. It is designed with the intention of enjoying touring on a daily basis, but occasionally driving on circuits.

HKS BASE KIT FRP AND CARBON FOR NISSAN FAIRLADY Z RZ34 VR30DDTT 53004-AN001

HKS COLD AIR INTAKE FULL KIT FOR TOYOTA GR86 ZN8 SUBARU BRZ ZD8 FA24 70026-AT012

 

HKS COLD AIR INTAKE FULL KIT FOR TOYOTA GR86 ZN8 SUBARU BRZ ZD8 FA24 70026-AT012

1. This HKS intake system is a set of cold air intake, carbon suction pipe and intake duct engineered for Toyota GR86 ZN8/ Subaru BRZ ZD8 FA24.

 2. Adopts the traditional high performance air cleaner "Super Power Flow (Φ150-80 wet type 2 layers)" to improve intake efficiency. 

3. By storing the Super Power Flow main body in the box, the influence of hot air in the engine room can be suppressed and the intake air temperature can be kept low and stable. 

4. The installation position of the air flow meter has not been changed from the stock position to meet the stock control, while the second intake duct has been added to reduce the ventilation resistance during intake. 

5. Carbon suction pipe used 3K* twill weave carbon prepreg* on the surface and UD* prepreg on the inside using a hot press manufacturing method. 

6. A silicone bag is used inside the pipe, and the hardening process is performed at high pressure and high temperature. This achieves high strength in addition to the smooth inner surface of the pipe. 

7. This will allow air to flow smoothly while maintaining sufficient strength. The connection with the intake box is made of silicon, which has sufficient resistance to the high temperature of the engine room. 

8. The smooth inner surface reduces the occurrence of inhalation resistance. In addition, the core wire is placed in the center to suppress deformation due to negative pressure and improve reliability. 

*** 3K: 3,000 carbon fibers Prepreg: A sheet containing thermosetting resin in the fibers in advance UD: Unidirectional carbon fiber. UD realizes high strength by changing the lamination direction and laminating multiple sheets. 

9. Air intake duct Intake resistance is reduced by adopting a one-piece structure with no joints inside by blow molding. 

10. To reduce the resistance at the maximum flow rate, the narrowest part is equivalent to about Φ87.5mm, whereas the genuine one is about Φ50mm. 

11. The layout is the same as the genuine one, so you can use it safely on the street without inhaling rainwater for your Toyota GR86 ZN8/ Subaru BRZ ZD8 FA24.

HKS COLD AIR INTAKE FULL KIT FOR TOYOTA GR86 ZN8 SUBARU BRZ ZD8 FA24 70026-AT012

 

Verus Engineering Rear Diffuser - Honda Civic CTR A0192A

FEATURES• Reduce Drag• Reduce Lift (Increase Downforce)• Improved Overall Aerodynamic Efficiency (Increase L/D)• Increase Tire Grip at Speed• Simple, Non-Invasive Bolt-on Design 

The Verus Engineering Rear Diffuser combines function, form and science to deliver unparalleled fit, performance and style to your 10th Gen Honda Civic Type R.

Utilizing state-of-the-art analysis software during the R&D process to extract more performance for the given build volume; increasing downforce generated and drag reduced from the addition of the rear diffuser.

During the design process Verus Engineering utilized scan data obtained internally. This resulted in a product that features a near OEM fit and finish.

The Rear Diffuser was designed for owners looking for function and form; specifically with a less aggressive strake design to make the diffuser a more subtle addition to an already aggressive looking vehicle.

WHAT IS INCLUDED• Rear Diffuser Main Plane (3)• Rear Diffuser Front Bracket (2)• Rear Diffuser Rear Bracket (4)• Rear Diffuser Strake (2)• Hardware Kit, Includes All Necessary Components for a Seamless Install

SPECIFICATIONS• CFD Optimized Design• 5052-H32 Sheet Aluminum Composition• CNC Laser Cut• CNC Press Brake Bent• Powder-coated Low Gloss Textured Black• Stainless Hardware Throughout• Unique Strake-to-Mainplane Construction• Made in the U.S.A.

Verus Engineering Rear Diffuser - Honda Civic CTR A0192A

Tubi Style Exhaust System w/Race Cat Porsche 997 GT3 | GT3 RS 07-11 TSPO997GT306.073.A

Material: ANSI SS 304

Main pipe diameter: 70mm

Catalytic Converter Removal: 300 cells

Product Finish: Polished

Note:

Racetrack use only

Tubi Style Exhaust System w/Race Cat Porsche 997 GT3 | GT3 RS 07-11 TSPO997GT306.073.A

 

Duraflex GT-R Hood for Ford Mustang 2005-2009 EXD104848

2005-2009 Ford Mustang Duraflex GT-R Hood - 1 Piece

Note: 

1. Hood pins are required.

2. Item 100% must be installed by a professional body shop with experience fitting aftermarket body panels. 

3. Some modification/ adjustment/ final fit must be performed for proper fitment. 

4. No returns or refunds.

Duraflex GT-R Hood for Ford Mustang 2005-2009 EXD104848

  

Aero Function AF-3 Hood for Porsche Cayenne 2011-2014 EXD112696

2011-2014 Porsche Cayenne Carbon AF-3 Hood ( CFP ) - 1 Piece

Note: 

1. Hood pins are required.

2. Item 100% must be installed by a professional body shop with experience fitting aftermarket body panels. 

3. Some modification/ adjustment/ final fit must be performed for proper fitment. 

4. No returns or refunds.

Aero Function AF-3 Hood for Porsche Cayenne 2011-2014 EXD112696

 

Aero Function AF-1 Wing for Lamborghini Aventador 2011-2017 EXD113753

1. This is 2011-2017 Lamborghini Aventador Carbon AF-1 Wing ( CFP ) - 1 Piece

2. Item 100% must be installed by a professional body shop with experience fitting aftermarket body panels. 

3. Some modification/ adjustment/ final fit must be performed for proper fitment. 

4. No returns or refunds.

Aero Function AF-1 Wing for Lamborghini Aventador 2011-2017 EXD113753

VR Forged D04 Wheel Package Ferrari 458 20x9.0 21x12 Matte Black VRF-D04-458-MBLK

 

VR Forged D04 Wheel Package Ferrari 458 20x9.0 21x12 Matte Black VRF-D04-458-MBLK

1. The VR Forged D04 is a full 1pc forged monoblock wheel. 

2. The design of this wheel is VR Forged most popular with a large split spoke design. 

3. Manufactured using a 10,000 ton press, these wheels are incredibly strong. 

4. This wheel is perfectly matched to any style vehicle giving you a strong aggressive stance look.

Information:

• All VR Forged wheels include center caps.
• They are designed to work with most OEM TPMS sensors.
• Some wheels may require aftermarket lug nuts or bolts.
• Weights are estimated from engineering and scale tests.
• Wheels are designed to work with OEM brakes and most big brake kits. Please provide BBK template if you have questions on fitment.
• All wheels go through extensive testing to meet proper regulations. 

Front Wheel Specs:

• Diameter: 20x9
• Offset: 35mm
• Bolt Pattern: 5x114.3
• Center Bore: 67.1
• Wheel Finish: Matte Black
• Wheel Weight (KG): 11.2
• Load Racing (KG): 750
• Lug Style: Conical
• Recommended Tire Size: 245/35/20

Rear Wheel Specs:

• Diameter: 21x12
• Offset: 45mm
• Bolt Pattern: 5x114.3
• Center Bore: 67.1
• Wheel Finish: Matte Black
• Wheel Weight (KG): 11.2
• Load Racing (KG): 750
• Lug Style: Ball
• Recommended Tire Size: 325/30/21

VR Forged D04 Wheel Package Ferrari 458 20x9.0 21x12 Matte Black VRF-D04-458-MBLK

AAM Competition 3 in. True Dual Exhaust Titanium Burnt Ends for Nissan 350Z AAM35E-MFTD3-T

The AAM 3” Competition True Dual exhaust system is a perfect match for any turbocharged 350Z, including 800rwhp+ competition setups.

1. The AAM Competition 3" True Dual Exhaust System is the highest flowing exhaust systems available for the 350Z. 

2. This exhaust has been designed to support the most demanding volume and velocity flow requirements. 

3. The AAM Competition exhaust system comes with a specially designed 3” inner diameter flange on each side. Bolted directly to either the factory cat pipes or most aftermarket 2.5” test pipes. 

4. Twin mandrel bent 3” polished stainless steel T-304 16 Gauge exhaust tubes run along each side of the 350Z’s under carriage. 

5. Two high-flow stainless steel resonators will ensure straight through flow and a deep exhaust note.

6. By decreasing thermal load, the AAM Competition 3" True Dual exhaust system provides the maximum reliability for your VQ35 engine and its internal components. 

7. Preliminary testing has shown gains over 40rwhp on high horsepower turbocharged 350Z cars compared to original equipment. 

EXCLUSIVE BENEFITS

- Highest Flowing Exhaust System Available for the 350Z
- Engineered to provide Aggressive Deep Tone with Minimal Drone
- Proven to support over 800+rwhp
- T-304 Stainless Steel Flanges

FEATURES

- Precision TIG welded T-304 Stainless Steel
- Includes All Necessary Gaskets & Hardware for Installation
- Made in the USA

4-6 Weeks is their typical build time.

AAM Competition 3 in. True Dual Exhaust Titanium Burnt Ends for Nissan 350Z AAM35E-MFTD3-T

 

DINAN BILLET SHORT-SHIFTER KIT - 1988-2006 BMW 318I 323I 325I 330I 530I 540I M3 M5 D550-1004

DINAN BILLET SHORT-SHIFTER KIT - 1988-2006 BMW 318I/ 323I/ 325I/ 330I/ 530I/ 540I/ M3/ M5E30/ E36/ E39/ E46

Features:

- A precise 20-25% throw reduction

- Counter balanced to reduce effort 

- Two piece 416 stainless steel & aluminum stick assembly 

- Two piece stick provides vibration free operation 

- Dampened pivot cup with self lubricating pivot ball 

- Polymer glide T-500 lower pivot bushings

1. Dinan's billet short-shifter kits effectively reduce the amount of throw necessary to make gear changes providing a sportier feel. 

2. Larger BMW models with larger gearboxes require more leverage to make the gear changes. BMW employs different shift handle configurations for various applications. 

3. The Dinan short shifters are application-specific to achieve an appropriate reduction of throw. 

4. Dinan's short-shifters retain the nylon pivot ball and shifter bushing providing the same smooth and quiet operation as the original shifter.

5. Other manufacturer's shifters employ metal components that tend to be noisier and induce a notchy feel. 

6. The DINAN billet short-shifter is also rubber isolated for a solid feel and vibration-free operation. 

7. Simple to install. Zero maintenance. Dinan's billet short-shifter has a 20% to 25% reduction in throw with a self-lubricating bearing for the ultimate in smooth short shifter technology.

NOTE:

Not compatible with the 6-speed manual that was introduced for the 2004-06 model years on the 330i/ci (this includes all ZHP cars) nor the 2001-05 325xi/330xi.

DINAN BILLET SHORT-SHIFTER KIT - 1988-2006 BMW 318I 323I 325I 330I 530I 540I M3 M5 D550-1004