TODA RACING POWER LINER KIT FOR CIVIC CR-X INTEGRA B16A B16B B18C 11102-B16-003

 

TODA RACING POWER LINER KIT FOR CIVIC CR-X INTEGRA B16A B16B B18C 11102-B16-003

Engine type: B16A/ B16B/ B18C
Liner thickness: When a ø82 piston is used, liner thickness is reduced to 2.8mm in the thinnest section and 6.0 mm in the flange section.

*Special Honing: The cylinder block operates under both mechanical and heat stresses. 

TODA's special honing process heats the block and along with the use a dummy head recreates the forces found in the block under normal operating conditions. 

This process helps to improve piston to bore sealing and gives you more power.

TODA RACING POWER LINER KIT FOR CIVIC CR-X INTEGRA B16A B16B B18C 11102-B16-003

SPOON ZERO BUMP STEER KIT FRONT SUSPENSION PARTS FOR HONDA CIVIC FD2 51220-FD2-010

 

SPOON ZERO BUMP STEER KIT FRONT SUSPENSION PARTS FOR HONDA CIVIC FD2 51220-FD2-010

By installing this Spoon Zero Bump Steer Kit, bump steer during lowdown is reduced and sudden toe changes are suppressed. 

As a result, the turn-in roll becomes natural and the steering can be turned and returned smoothly. 

Apart from that, the angle of the lower arm is corrected, the roll center is optimized and the straightness is also improved.

SPOON ZERO BUMP STEER KIT FRONT SUSPENSION PARTS FOR HONDA CIVIC FD2 51220-FD2-010

 

Scotidi 15-22 Mustang Handbrake Kit 005-011-0375

Handbrakes are great tool during drifting, but ruining the interior of your car for one isn’t so great, especially when you have a 2015 or newer Mustang.

Scotidi had created a full interior handbrake option for the S550 Chassis and came up with a mount that allows you to keep 100% of your interior, hides every component besides the handle and puts the handle in the ideal spot.

This is the cleanest handbrake from Scotidi in the market for your Mustang. 

It is advised to use this in combination with Scotidi 15-22 Mustang Dual Caliper brackets that utilize Wilwood calipers.

Includes:

• Handbrake and mount pre-assembled

• Remote reservoir and necessary lines/fittings

• Mounting hardware for the car

• Finish bezel

• 3D printed template to precisely cut out the hole for the handle For Track use only, NOT DOT APPROVED.

Scotidi 15-22 Mustang Handbrake Kit 005-011-0375

DIXCEL FRONT BIG DISC ROTOR TYPE PD FOR HONDA CIVIC EG6 EK4 3315061-PD

 

DIXCEL FRONT BIG DISC ROTOR TYPE PD FOR HONDA CIVIC EG6 EK4 3315061-PD

Disc Diameter: 282 
Thickness: 23 
Height: 47.2 
Centering bore diameter : 64.2 
P.C.D: 100 
number of holes: 4

This is big brake discs for the Honda Civic EG6/EK4 (four-hole version). The same size brake disc as the Honda Civic EK9 Type-R available as a four-hole version.

For use on the Honda Civic EG6/EK4, when upgrading to the OEM type-R brake calipers used on the Civic EK9 Type-R. 

Some vehicles may require spacers due to a change in the offset of the disc.(Spacers are NOT available from DIXCEL.) 

This product has multiple hole patterns to fit a number of vehicles. The multiple holes do not affect brake performance. 

※Some vehicles may require spacers due to a change in the offset of the disc.(Spacers are NOT available from DIXCEL.) 

※This product has multiple hole patterns to fit a number of vehicles. The multiple holes do not affect brake performance. 

DIXCEL FRONT BIG DISC ROTOR TYPE PD FOR HONDA CIVIC EG6 EK4 3315061-PD

VARIS SOLID JOKER TY-R WIDE BODY KIT FOR HONDA INTEGRA DC2 HA-H010

 

VARIS SOLID JOKER TY-R WIDE BODY KIT FOR HONDA INTEGRA DC2 HA-H010

Original VARIS wide body aero parts. Includes the following items: 

1. SOLID JOKER TY-R WIDE BODY FRONT SPOILER 3K CARBON 

2. SOLID JOKER TY-R WIDE BODY FRONT FRONT FENDER 50MM FRP 

3. SOLID JOKER TY-R WIDE BODY SIDE SKIRT FRP 

4. SOLID JOKER TY-R WIDE BODY FRONT REAR FENDER 50MM FRP

VARIS SOLID JOKER TY-R WIDE BODY KIT FOR HONDA INTEGRA DC2 HA-H010

TOP FUEL COOLING PURGE BOARD FOR SUBARU BRZ ZC6

 

TOP FUEL COOLING PURGE BOARD FOR SUBARU BRZ ZC6

**Conformity: 86 / ZN6  BRZ / ZC6 

By attaching it to the front lower arm, it efficiently blows the running wind to the brake to cool the brake and suppress the boiling of fade and fluid.

 
In addition to cooling, the air on the underside of the car body is discharged from the wheel house to suppress the lift of the car body and stabilize the car body. 

The material is dry carbon, so you can use it without worrying about weight increase. 

* It may be difficult or impossible to install the vehicle with extremely low vehicle height. 

* If it interferes with the wheel, cut off the interference part to make a relief. 

* It will be a competition part. No compensation or complaints. 

TOP FUEL COOLING PURGE BOARD FOR SUBARU BRZ ZC6

SEEKER SAS DOWN SPRINGS FOR HONDA CIVIC FK7 FC1 13010-FK7-000

 

SEEKER SAS DOWN SPRINGS FOR HONDA CIVIC FK7 FC1 13010-FK7-000

This Seeker SAS Down Springs will be used by replacing the genuine spring. 

You may try your ride to feel great like handling a sports car.

Compatible models: DBA-FK7 / DBA-FC1 

Vehicle height: 25 to 30 mm down compared to genuine (in-house measured value) 

Spring rate: Approximately 10% UP compared to genuine (genuine) Please cut the specified amount of bump rubber.

Vehicle inspection compatible * When this product is installed on a normal vehicle 

* *The price is for one SET product.

**This product supports quality assurance for up to 3 years or mileage of 50,000 km. 

SEEKER SAS DOWN SPRINGS FOR HONDA CIVIC FK7 FC1 13010-FK7-000

CAR MAKE T&E [VERTEX] R32 SKYLINE 4DOOR SKYLINE 3P FULL KIT FOR CARMAKETE-02341

 

CAR MAKE T&E [VERTEX] R32 SKYLINE 4DOOR SKYLINE 3P FULL KIT FOR CARMAKETE-02341

Brand name: CAR MAKE T&E

Series name: [VERTEX] R32 SKYLINE 4DOOR SKYLINE 3P FULL KIT

Product number: CARMAKETE-02341

CAR MAKE T&E [VERTEX] R32 SKYLINE 4DOOR SKYLINE 3P FULL KIT FOR CARMAKETE-02341

EXHAUSTTECH-JAPAN VARIABLE VALVE EXHAUST SYSTEM FOR FERRARI 458 ITALIA SPIDER EXHAUSTTECH-JAPAN-00001

 

EXHAUSTTECH-JAPAN VARIABLE VALVE EXHAUST SYSTEM FOR FERRARI 458 ITALIA SPIDER EXHAUSTTECH-JAPAN-00001

Brand: EXHAUSTTECH-JAPAN

Product Description: Valvetronic full exhaust system

Compatible Car: FERRARI 458 ITALIA SPIDER

EXHAUSTTECH-JAPAN VARIABLE VALVE EXHAUST SYSTEM FOR FERRARI 458 ITALIA SPIDER EXHAUSTTECH-JAPAN-00001

SPOON AIR CLEANER FOR HONDA CIVIC FL K20C 17220-FL5-S00

 

SPOON AIR CLEANER FOR HONDA CIVIC FL K20C 17220-FL5-S00 

Compatible Models: 6BA-FL5

Spoon Air Cleaner for the CIVIC TYPE R (FL5) has been developed to maximize the potential of the air intake system.

The Honda's air intake system is renowned for its innovative method to control the intake pulsation of the normally aspirated engine, optimizing the response and drivability. 

Spoon had moulded into this with it high-performance air intake system distinctively designed to lower the intake air temperature.

Increasing the material density of the air filter allows for a greater particle collection capability but decreases the air flow.

However using filter materials with lower density may allow for greater air flow but you trade in the particle removal capabilities. 

More than that, the excessive air flow may cause a decrease in lower-end torque thus hampering the overall drivability.

The filtration material of Spoon Air Cleaner was carefully developed, optimizing the torque/ power output on the dyno and undergoing numerous real world road testing.

The SPOON SPORTS Air Cleaner was developed to bring out the maximum potential of the CIVIC TYPE R (FL5).

Remarks & special notes:
Maintenance does not require application of filter oil or cleaning with cleaning agent, just blow off dust with an air gun. 

*If it is particularly dirty, wash it with water using a neutral detergent, let it dry naturally and then reattach it.

SPOON AIR CLEANER FOR HONDA CIVIC FL K20C 17220-FL5-S00

 

ISR Performance Driveshaft - S14 240SX KA/SR Non ABS - Aluminum IS-DS-KASRS14-A

This is S14 240SX with KA/SR 5 Speed Non ABS Aluminum Shaft. 

This is the ISR one piece driveshaft conversion for the 240SX platform. 

The shaft is built using Dana/ Spicer solid high performance u-joints. 

By removing the factory 2-piece shaft and installing a single shaft the car will feel more responsive due to the fact the rubber carrier bearing is not moving up and down during acceleration. 

Please Note: Verify if you are using a non abs or abs differential to determine which driveshaft you need. 

The change in differential will change the length of the driveshaft. 

Be sure to check your vehicle before ordering. 

This shaft is a replacement for your OEM driveshaft and will eliminate the carrier bearing 

** Built to order 1 week lead time **

ISR Performance Driveshaft - S14 240SX KA/SR Non ABS - Aluminum IS-DS-KASRS14-A

Clutch Masters FX300 Clutch Kit - Toyota 2JZGTE 16-000-HDTZ

Features

• Heavy-duty street & racing system
• Holding capacity 110% over stock
• Heavy-Duty reinforced pressure plate
• Hi-Leverage pressure ring design
• Sprung hub/cushioned disc
• Steel backed Segmented Carbon/Kevlar

Includes

• Pressure Plate
• Clutch Disc
• Throw-out Bearing (when applicable)
• Pilot Bearing or Bushing (when applicable)
• Alignment Tool

1. Segmented Kevlar Steel Back System from Clutch Masters is 110% over stock on holding capacity.

2. The FX300 System uses the Power Plus I Pressure Plate with the Steel Back Segmented Kevlar disc. 

3. This clutch is designed for the ultimate street enthusiast or weekend racer running a normally aspirated car equipped with cylinder head work and/or hotter cam(s), or with medium-boost turbo or super-charger, or up to 100hp NO2. 

4. The FX300 features only slightly increased pedal pressure (overstock components), long life disc and smooth engagement.

Clutch Masters FX300 Clutch Kit - Toyota 2JZGTE 16-000-HDTZ

 

SPC Porsche Adjustable Trailing Link Pair SPC72630

This is among the best upgrade for your Porsche 996 986 front or rear non-adjustable factory trailing arms, it is a fully adjustable arms from SPC Performance. 

Constructed from forged 6061-T6 aluminum with a hard black anodized finish, they adjust with an easy to reach threaded adjuster.

Maintain factory ride with SPC x Axis sealed flex joints which eliminate binding and bushing compliance. 

When you install these links on the front, you will be able to adjust caster to 1.25”. SPC has maintained the OE form so that you will be able to reuse your factory air deflector without modification. 

When you install these arms on the rear you will be able to adjust set-back 1/2 inch (13mm). 

Designed for street use as well as the rigors of the track, these arms will let you set your alignment angles as you wish. 

For camber adjustment, consider SPC's adjustable camber arms, PN# 72610. These SPC arms are designed to work together to make your suspension fully adjustable. 

SPC Porsche Adjustable Trailing Link Pair SPC72630

 

MBRP 12-21 Ferrari 812SF 812GTS F12 6.3L 6.5L V12 70mm X-Pipe Kit T304 Stainless Steel MBRPS3900304

Features:

• 2012-2021 Ferrari 812SF/ 812GTS F12 6.3L/6.5L V12 70mm X-Pipe Kit T304 Stainless Steel
• Smooth Mandrel Bent Tubing
• Durable T304 Stainless Steel
• Bolt-on Installation
• Moderate Exhaust Tone
• X-Pipe

MBRP Pro Series is the best performance exhaust system that money can buy. 

It is a series designed and built for the serious enthusiast who will settle for nothing less. 

Constructed from T304 stainless steel and will deliver your car’s optimal durability at its best.

Easy to clean and maintain this is the product of choice for owners of lifted vehicles operated in severe environments.

MBRP 12-21 Ferrari 812SF 812GTS F12 6.3L 6.5L V12 70mm X-Pipe Kit T304 Stainless Steel MBRPS3900304

TANABE GT FUNTORIDE SPRING FOR HONDA CIVIC FL1 FK7FK

 

TANABE GT FUNTORIDE SPRING FOR HONDA CIVIC FL1 FK7FK

TANABE made springs with precise dimensions, excessive testings and checking prior to come out with an exceptional springs. 

By repeating trial production and running tests over and over again until a satisfactory spring is completed, TANABE thoroughly pursue the characteristics of a sports car, leading to attractive products. 

In addition, by setting the handling to be supple and sharp, TANABE had realized the flexibility to supple the gap on the road surface and the sharpness of handling that can trace the target line when turning. 

Front: 20-30mm Down.

Back: 20-30mm Down. 

Rate: F: 3.1K, R: 3.3K

TANABE GT FUNTORIDE SPRING FOR HONDA CIVIC FL1 FK7FK