YASHIO FACTORY SUPER SILENT TITANIUM MUFFLER TWIN TAIL FOR NISSAN SILVIA S14 S15 YASHIO-FACTORY-00048

 

YASHIO FACTORY SUPER SILENT TITANIUM MUFFLER TWIN TAIL FOR NISSAN SILVIA S14 S15 YASHIO-FACTORY-00048

1. Yashio Factory is the only Silvia rear tail twin out called twin tail. 

2. Gives quieter sound than norms for those who prefer a more relax and natural noise for their Silvia S15 S14.

3. Quiet here means the sound is within 96dB, which is barely acceptable for vehicle inspection and in normal case, power remain the same. 

4. Quietness is one of a measure to pass the vehicle inspection and comply with regulations.

YASHIO FACTORY SUPER SILENT TITANIUM MUFFLER TWIN TAIL FOR NISSAN SILVIA S14 S15 YASHIO-FACTORY-00048

J'S RACING FX-PRO FULL TITANIUM MUFFLER 60RS FOR HONDA CIVIC EK9 B16B FTM-H5-60RS

 

J'S RACING FX-PRO FULL TITANIUM MUFFLER 60RS FOR HONDA CIVIC EK9 B16B FTM-H5-60RS

1. The popular J'S RACING full titanium muffler has undergone a model change. 

2. While maintaining the straight structure that reduces back pressure to the utmost limit, the silencer has been enlarged to achieve higher quality. 

3. Titanium 1mm thick pipe is used to thoroughly pursue weight reduction. It has achieved an amazing weight reduction of 50% or more compared to the genuine muffler. 

4. The titanium pipe bent smoothly using a 3D bender has a smooth structure with low exhaust resistance. 

5. The dolphin tail has a sharper design by incorporating a cut manufacturing method. 

6. The 60RS developed for the street has a main pipe of 60φ and a straight structure for the silencer to achieve torque and power up in the entire area. 

7. The dry VTEC sound peculiar to full titanium resonates comfortably and it complies with safety standards by using an inner silencer (sold separately). 

8. The J'S RACING FX-PRO Full Titanium Muffler is indeed a muffler that raises the potential of the car by powering up and reducing the weight. 

J'S RACING FX-PRO FULL TITANIUM MUFFLER 60RS FOR HONDA CIVIC EK9 B16B FTM-H5-60RS

YASHIO FACTORY SUPER SILENT TITANIUM MUFFLER FOR TOYOTA GR86 ZN8 YASHIO-FACTORY-00082

 

YASHIO FACTORY SUPER SILENT TITANIUM MUFFLER FOR TOYOTA GR86 ZN8 YASHIO-FACTORY-00082

1. This is an awesome super silent titanium muffler for Toyota GR86. 

2. The center pipe is 70Φ, the tail pipe is 60Φ, and the Dale end is 113Φ. 

3. It was 100% made of all titanium that gives uniques sound with an exceptional prestige.

YASHIO FACTORY SUPER SILENT TITANIUM MUFFLER FOR TOYOTA GR86 ZN8 YASHIO-FACTORY-00082

ORC CLUTCH METAL SERIES ORC-659 TWIN FOR NISSAN SKYLINE ORC-P659D-NS0104

 

ORC CLUTCH METAL SERIES ORC-659 TWIN FOR NISSAN SKYLINE ORC-P659D-NS0104

1. This is a heavy-duty clutch that accommodates widely from light tuned car to high powered car. 

2. It enables mild and outstanding pedal feeling, secure torque transmission, better clutch disengagement and stable half clutch feeling at high level. 

3. This an exceptional Metal Clutch Series that correspond to a wide range of crucial situations.

4. It reacts so fast quickly to driver's mind and gives great controllability that contributes to improving time significantly.

5. Features:

- Engine: RB26DET 
- Item type: HP (high crimp type) damper with the clutch disk 
- F / W mounting bolts: it has been supplied with the clutch KIT. 
-Sleeve bearings: Please use the genuine products. 
- Release bearing: Please use the genuine products. 
- Mechanism: pull 
- Corresponding torque: 735 (75) N · m (kgf · m)

6. Remark: GETRAG6 speed MT only with SE mechanism

ORC CLUTCH METAL SERIES ORC-659 TWIN FOR NISSAN SKYLINE ORC-P659D-NS0104

M&M HONDA FRONT LOWER ARM PILLOW MOUNT FOR ACCORD CL7 00805-CL7-F002

 

M&M HONDA FRONT LOWER ARM PILLOW MOUNT FOR ACCORD CL7 00805-CL7-F002

1. The geometry of the front suspension of HONDA ACCORD CL7 shall be kept minimum at an appropriate value for the best steer.

2. Rubber bushings will break due to prolong excessive load deformation from high performance driving.

3. The M&M HONDA front lower arm pillow mount for ACCORD CL7 will act better to eliminate an extreme deformation to the CL7 structure. 

4. You can freely control the posture change as the basis of damper setting. 

5. For better tuning for the lower arm, M&M recommend to install the compression pillow, lower arm pillow and damper pillow at the same time. 

6. Press-fitting work with a press is required for installation, require to get assistant from a good workshop.

M&M HONDA FRONT LOWER ARM PILLOW MOUNT FOR ACCORD CL7 00805-CL7-F002

ZEROFIGHTER LOWER CONTROL ARM LCA FOR HONDA EK CIVIC EK ZEROF-00754

 

ZEROFIGHTER LOWER CONTROL ARM LCA FOR HONDA EK CIVIC EK ZEROF-00754

1. The lower control arm is an important part of the suspension system because it gives connection between the suspension system and the wheels.

2. Multiple bad things may happen when lower control arms failed. Mostly come from ball joints failure.

3. Ball joints failure can cause steering knuckle disconnect and loss of control of the car.

4. Control arm bushings failure also may lead to clunking, wandering steering and also loss of control.

5. By lowering the shock mounting position, you can earn the stroke of the shock itself and further lower the vehicle height. 

6. This high quality lower control arms from ZEROFIGHTER are unmatched with inferior copy products from some manufacturers and cheap lower control arms that are often sold by adopting original reinforced bushes.

7. There are great concerns that they will fail and unusable due to breakage or rattling of the bushings under challenged conditions.

8. Available in 4 colors:

- Chrome Silver 
- Anadized Red 
- Anadized Purple 

- Gold

ZEROFIGHTER LOWER CONTROL ARM LCA FOR HONDA EK CIVIC EK ZEROF-00754

IKEYA FORMULA FRONT ADJUSTER PILLOW LOWER ARM FOR TOYOTA 86 ZN6 IFAE10004

 

IKEYA FORMULA FRONT ADJUSTER PILLOW LOWER ARM FOR TOYOTA 86 ZN6 IFAE10004

1. IKEYA FORMULA Front Adjuster Pillow Lower Arm will correct the deterioration of the roll center position.

2. Deterioration occurs when the vehicle height is lowered with the genuine lower arm to the ideal roll center position. 

3. This correction will improve steering response by eliminating the insufficient stroke of the lower arm.

4. At the same time will improve tire contact pressure that occurs with a low vehicle height setup. 

5. In addition, the turnbuckle mechanism of the lower arm and tension rod greatly expands the range of settings such as tread, caster and camber.

 6. Adjustment range:

- Tread (-8mm to +20mm on one side)

- Camber (From current value to 30' for positive and 2°40' for negative) 

- Caster (From genuine value 5°54' to ±1°30')

7. Repair parts:

Rod The end pillow ball bushings are subject to change, to contact IKEYA FORMULA for details.

IKEYA FORMULA FRONT ADJUSTER PILLOW LOWER ARM FOR TOYOTA 86 ZN6 IFAE10004

APEXI INTAKE D PLUS CFRP FOR SUBARU BRZ ZD8 TOYOTA GR86 ZN8 FA24 519-T003

 

APEXI INTAKE D PLUS CFRP FOR SUBARU BRZ ZD8 TOYOTA GR86 ZN8 FA24 519-T003

1. Compatible engine: FA24

2. Increase the intake air volume of the genuine air cleaner box, an original intake duct. 

3. Improved intake performance by removing the genuine resonator BOX and adding an intake pipe. 

4. Uses 3D scanning to achieve efficient layout design and smooth air intake.

5. The dry carbon finish gives the engine room a sporty finish. 

6. Direct intake of fresh air from the bumper side to generate stable torque and power.

APEXI INTAKE D PLUS CFRP FOR SUBARU BRZ ZD8 TOYOTA GR86 ZN8 FA24 519-T003

SARD TI-Z MUFFLER FOR LEXUS RCF 23000

 

SARD TI-Z MUFFLER FOR LEXUS RCF 23000

1. Compatible Engine: 
- Model Year: 2015-2020 
- One-sided one-out type: One-sided one-out type corresponds to genuine bumper 
- One-sided two-out type: One-sided two-out type is for LSR EDITION rear bumper only 

2. All titanium: Both the main pipe and silencer are made of ultra-lightweight titanium. 

3. SARD pursued a unique sound that is typical of titanium. 

4. Adjustable length tail end: The tail end is adjustable in length, so you can adjust the width of the tail according to your aero and taste. 

5. Type: One on each side 

6. Material: Full titanium 

7. Weight: 10.5kg (genuine 18.6kg) 

8. Main pipe diameter: φ60.5 

9. Tail diameter: φ100 × 2

SARD TI-Z MUFFLER FOR LEXUS RCF 23000

TOMS LC500 URZ100 BODY REINFORCEMENT COMPLETE KIT FOR TOYOTA LEXUS LC URZ100 53000-TUZ10

 

TOMS LC500 URZ100 BODY REINFORCEMENT COMPLETE KIT FOR TOYOTA LEXUS LC URZ100 53000-TUZ10

Compatible Engine:  
Model Year: H29.3 ~ 
Upper performance rod, members brace (before and after), lower body brace (before and after)  a total of four points set 
Material: Steel

※ 1: non-genuine muffler vehicles may interfere.

TOMS LC500 URZ100 BODY REINFORCEMENT COMPLETE KIT FOR TOYOTA LEXUS LC URZ100 53000-TUZ10

GRUPPEM K&N Genuine Replacement Filter for LAMBORGHINI GALLARDO JFGE12 GE07L1 33-2490

GRUPPEM K&N Genuine Replacement Filter for LAMBORGHINI GALLARDO JFGE12 GE07L1 33-2490

Compatible Engine: 
Displacement: 5.0 L 
Grade / Specifications: V10 SPYDER 
Genuine part number: 07L133843D 
Product brand: K & N 
Product category: Genuine replacement filter 

REPLACEMENT 
Filter shape Size: Panel square ・ Long side 325 x Short side 159 mm. 

1. A genuine replacement type air filter that maximizes the characteristics of the genuine cleaner BOX that is not affected by the heat in the engine room. 

2. The filter medium uses a unique wet cotton 4-layer filter that has a proven track record and is reliable over many years of racing. 

3. Achieves excellent response and performance improvement by achieving both suction resistance and filtration performance at a high level. 

4. Can be used repeatedly by cleaning with the separately sold maintenance kit for K & N (part number 99-5000).

GRUPPEM K&N Genuine Replacement Filter for LAMBORGHINI GALLARDO JFGE12 GE07L1 33-2490

ENDLESS Racing Mono6 6R System Inch Up Kit Front Rear Set for Porsche 911 996 GT3 EEZOX96GT3

ENDLESS Racing Mono6 6R System Inch Up Kit Front Rear Set for Porsche 911 996 GT3 EEZOX96GT3

Rotor (Dia/Thick): 

Fr: 380x34 (2PCS) type

Rr: 355x32 (3PCS) type

Pad Fr: RCP121 

Pad Rr: RCP122

1. Monoblock caliper "RacingMONO6" are forged with thousands of tons of pressure. 

2. Four years after conception and one year after the completion of the prototype, this ENDLESS caliper had undergone abundance test races and specifications changed many times.

3. The processing of the highly difficult piston cylinder is cleared by using advanced special technology. 

4. Finishing body done with super hard alumite treatment. 

5. FRONT: "High rigidity" and "light weight" proven by forged monoblock.

6. REAR: 6POT forged monoblock caliper for rear.

7. Kit contents (main)

Caliper body (ultra-hard alumite) 

Exclusive caliper brake pads 

Mounting bracket 

Large diameter brake rotor 

Brake line for caliper 

Caliper body color: Super hard alumite

8. The rotors for RacingMONO6/ MONO6r/ MONO4/ MONO4r are E slit type and all other rotors are carving slit type.

ENDLESS Racing Mono6 6R System Inch Up Kit Front Rear Set for Porsche 911 996 GT3 EEZOX96GT3

Greddy Direct Suction Hose for Toyota GR86 ZN8 Subaru BRZ ZD8 11910114

 

Greddy Direct Suction Hose for Toyota GR86 ZN8 Subaru BRZ ZD8 11910114

1. Made of fiber mesh + 3 layers of silicon to ensure heat resistance and durability. 

2. The straight shape of the genuine bellows structure reduces suction resistance and promotes smooth intake. 

3. GReddy direct suction has a capacity increase of about 50% at 1395cc compared to the volume of 910cc of the normal intake hose (excluding resonator). 

4. Weight is reduced by 25% compared to normal and weight is reduced by about 150g. 

5. Color variations: Blue, red, black genuine replacement installation (reference work time: 20 minutes). 

6. The resonator under the pipe cannot be installed. Therefore, the intake noise may increase.

Greddy Direct Suction Hose for Toyota GR86 ZN8 Subaru BRZ ZD8 11910114

 

STILLEN GEN 2 INTAKE 09-17 NISSAN 370Z stln40285

1. Product Features:
•Twin Mandrel Bent Polished Aluminum Intake Tubes
• Polyurethane Heat Shields
• High Quality Washable Oiled Filter
• Increased Throttle Performance and Horsepower
• CARB Exempt - E.O. #D-436-22 

2. Nissan 370Z Air Intake - (Gen 2) Dual Long Tube w/ Polyurethane Heat Shields [Z34] - Oil Filter - 402851

3. BENEFITS:
• 13WHP / 9WTQ Peak Gain, Consistent Improvement Across The 

Rev Band*

• Built To Last - Designed & Manufactured in U.S.A.
• More Efficient Air Filter Media & Enhanced Airflow Improves mileage per gallon (MPG).
• Improved throttle response
• Easy To Install - Simple Enough To Do In Your Driveway
• Visually Improves Your Engine Bay
• Runs Great On Stock Tune - No CEL, No Tune Needed!
*Results May Vary!

4. Great option to increase engine performance with the STILLEN air intake for Nissan 370Z Z34. The GEN 2 features the most optimal horsepower and torque gains. 

5. This STILLEN Nissan 370Z air intake has a polished finish. This Z34 370Z intake provides a better air flow to the engine with the smooth surface tubing construction.

6. The Dual Throttle Body 6th gen 370Z owners who want improved performance with a show quality shine, can do so with STILLEN Gen 2 Long Tube Intakes. 

7. STILLEN had replaced the restrictive factory air boxes with two (2) oil filters. 

8. These filters are designed with an integral velocity stack and attach to the newly designed polished aluminum long tubes. 

9. Replacing the factory intake tubes with STILLEN design will add additional horsepower and a great look for the engine bay.

10. The Z34 filters sit inside custom-fitted urethane intake boxes, which ensure no hot engine compartment air gets sucked into the intake tract. 

11. This will create a cold air path and unlike other manufacturers who only partially shield the filter from hot underhood air, STILLEN has fully enclosed the filters and draws on cold air from behind the grille, for optimum performance.

12. The STILLEN Generation 2 Long Tube Dual Hi-Flow Intake for 6th gen 370Z is mild under cruising situations, and really comes to life creating an impressive intake note under acceleration.

***Does not fit fit 2018+ model vehicles. For those vehicles STILLEN highly recommend an extremely popular Gen. 3 intakes.

STILLEN GEN 2 INTAKE 09-17 NISSAN 370Z stln40285

 

ACT HD Clutch Kit Mazda Mx-5 Miata(2006) ACTZM5-HDR4

1. This kit features ACT's most popular Heavy Duty pressure plate in the market for high performance drive.

2. ACT Heavy Duty pressure plates use exclusive diaphragm design:

- to increase clamp load

- to reduce deflection

- to maximize clutch life

3. All diaphragms undergone a four-stage, heat-treating process for unparalleled performance. 

4. ACT pressure plates have precision cover stampings to provide rigidity and consistency. 

5. ACT's spring-centered race disc features a spring-center to properly damp torsional vibrations for quieter operation and resist failure even under harsh conditions. 

6. ACT spring retainers utilize wrap around spring windows and thicker retainer stampings to provide spring support, reduce stress concentrations, and increase strength and reliability.

7. This is a great clutch that will improve true potential for Mazda Mx-5.

ACT HD Clutch Kit Mazda Mx-5 Miata(2006) ACTZM5-HDR4