GReddy RS-Race Exhaust for Nissan 240SX '89-'94 gre10128409

 

GReddy RS-Race Exhaust for 

Nissan 240SX '89-'94 gre10128409

1. The GPP RS-Race for the 1989-94 Nissan S13 (240SX) is an aggressive system for the 240SX (hatchback & coupe).

2. The RS-Race is ideally suited for turbocharged KA24DE, SR20DET or other race engine applications (or who just want an aggressive sounding exhaust), which require less sound suppression and maximum flow. 

3. This light-weight, full stainless-steel 3.0” (76mm) cat-back RS-Race exhaust has no pre-resonator. Even with the cost-effective price point on the RS-Race, quality materials, construction and craftsmanship is not compromised. 

4. For extra customize, the RS-Race Tri-bolt tip allows for installation of optional RS Tip Silencers, various tip lengths and styles in both stainless steel and genuine Titanium.

Make: Nissan
Model 240SX (180SX)
Years: 1989-94

GReddy RS-Race Exhaust for Nissan 240SX '89-'94 gre10128409

 

SLR Speed E36 Bmw Low Caster Race Kit - Purple C.00.075

1. This is a Roll Center/Steering quickening Standard Length Low Caster Race arm kit

2. Intended for 1982 to 2006 BMW 3 Series *For E46 M3 see separate listing*

3. Please note, this race kits do not add steering angle and often will reduce steering clearance slightly because they are designed with a delta shape in place of the L-shape factory arms to provide a stronger arm with direct load paths for minimum weight. 

4. Lightweight tubular high strength control arm set, including matched Billet 7075-T6 Aluminum roll-center, bump-steer and quick steering geometry plates. 

5. Each control arm is 100% TIG welded in house by a master of the craft. Built to OEM control arm length by default. 

6. These are some of the lightest and strongest front control arms available on the market. 

7. If you have a little extra room under the fenders, instead of adding spacers or low offset wheels SLR Speed can build the arms to suit +54mm or +108mm track width in order to increase your track while maintaining your scrub radius as close to stock as possible for better, more neutral steering feel and control. 

8. This kit is built with the sole purpose of lowering your lap times not for maximum angle clearance.

9. No sway bar provision, recommend the M3 style strut sway link, but a control arm sway link provision can be added as an option if requested. 

10. The arms are affixed with custom designed and developed hardware proudly machined in the USA by SLE Speed from forged 4140 billet steel. 

11. This kit bundles four expensive upgrades for your car into one affordable package: 
• Lightweight chromoly control arms(40% arm weight reduction for e30/e36) 
• Roll-center correction
• Bump-steer correction
• Quick-ratio steering

12. Other companies may charge nearly as much for simply a pair of control arms and hardware and you will need to purchase additional parts to get the same benefits as SLR Speed complete package.  

13. **PLEASE NOTE** All E36 race arms are built to 93-95 M3 geometry unless otherwise requested, (96+ Evo 3.2L geometry can be built, but has less clearance for larger tires) additional caster can be gained by using our adjustable lollipop (FCAB) as well as caster top mounts. 

14. Kit Features
• 40%* faster steering ratio
• 34mm roll-center correction
• Matching bump-steer correction
• 4-position adjustable ackerman (zero, low, medium, high) 

15. What's in box
• SLR Lower Control Arms x2
• SLR Inner & Outer Balljoint studs
• SLR Billet Bump-steer / Roll-center /Steering Adapters x2
• SLR Adjustable Outer Tie Rods x2
• SLR Billet tie-rod tubes x2
• SLR Slip on Steering Rack Limiters (1 set) 
• All hardware for 100% bolt-on installation
• SLR Installation Manual & decals
• E46/Z4 kits will include Delrin lollipop bushings by default

SLR Speed E36 Bmw Low Caster Race Kit - Purple C.00.075

 

DINAN FREE FLOW AXLE-BACK EXHAUST - 2001-2006 BMW M3 D660-4604

1. This is truly the best high-performance Axle-Back exhaust for your M3.

2. Dinan's unique muffler design effectively reduces back-pressure that improved flow, resulted in horsepower and torque increased. 

3. Built from 304 stainless steel inside and out for superior resistance to corrosion and reduce of weight. 

4. A deep throaty exhaust note will comes from an aggressive-looking ceramic-coated tips instantly. 

5. Features:
-More Power: + 7 HP @ 8000 RPM + 5 LB-FT @ 5000 RPM (w/ software)
-Drone abatement technologies used to reduce cabin resonance
-Enjoyably louder, sportier sound
-Quad 3" black ceramic coated and laser engraved exhaust tips
-15 lbs. lighter than stock (43 lbs. vs. 58 lbs.)
-100% 304 stainless steel construction
-Uses the factory brackets and hangers for a factory-like fitment

NOTE:
Stage 2 Engine Software recommended for optimum performance and drivability.

DINAN FREE FLOW AXLE-BACK EXHAUST - 2001-2006 BMW M3 D660-4604

 

PPG 6 Speed Heavy Duty Helical Synchro Gearset - Nissan GTR R35 PPG-GTR-GEARSET

1. PPG is one of the first to manufacture this HEAVY DUTY helical synchro gearset for the new R35 GTR. 

2. This excellence and very popular gear set is a direct replacement for the existing gear set found in the R35.

3. The is no re-programming required after installation.

4. The Standard Nissan ratios the set has been designed with wider components and undergone PPG's special heat treatment.

5. The special treatment had increased the strengthened gear set to operate more at optimum performance levels.

6. Designed for street and circuit applications, the best is with quite operation/ minimum noise for daily drive.

PPG 6 Speed Heavy Duty Helical Synchro Gearset - Nissan GTR R35 PPG-GTR-GEARSET

 

OEM Nissan S15 Silvia Headlights 26010-85F27/ 26060-85F27

1. Nissan S15 Silvia OEM Headlights. 

2. Includes Both Left and Right Lights.

3. Car not included

OEM Nissan S15 Silvia Headlights 26010-85F27/ 26060-85F27

 

Pagid Brembo Ferrari 458 Speciale 488 Front Brake Pad Set PAG-4580- RSC1

1. For Ferrari 458 and 488 but can fit other Ferrari models. Racing designed and built to withstand high temperatures.

2. Used with ceramic composite discs. 

3. The RSC1 compound usage varies for track and race specifically for low thermal oxidation.

4. The low metallic resin bonded material is from steel and aramid fibers. 

MODEL COMPATIBILITY

- Ferrari 458 Speciale 2013+ front 

- Ferrari 488 2015+ front 

- Ferrari 388 Pista 2018+ front

Pagid Brembo Ferrari 458 Speciale 488 Front Brake Pad Set PAG-4580- RSC1

 

HKS Infiniti G35(2003-2006) HKS Hi-Power Exhaust Hi-Power Exhaust hks32009-BN002

1. This excellence Hi- Power exhaust was inspired and designed from endurance and GT racing in Japan.

2. HKS had developed its Hi-Power Exhaust system for both turbocharged and naturally aspirated applications. 

3. The larger and smoother exhaust flow will create greater exhaust velocity for better mid-range boost response and high-RPM power.

4. An excellence horsepower and torque improvement exhaust system from HKS.

5. HKS 32009-BN002 Hi-Power Exhaust Specifications:

- Piping: 60mm

- Tip: 120mm

- Tip Style: HP-Ti

HKS Infiniti G35(2003-2006) HKS Hi-Power Exhaust Hi-Power Exhaust hks32009-BN002

 

CP Pistons Set - Toyota Supra 86-92 cppSC7470-6

1. The CP Pistons ate well known for its excellence features:

- superb ring seal

- higher vacuum

- lower blow by

- greater durability 

2. For sure, the CP pistons will increase horsepower and torque for Toyota Supra 86-92 up to the highest RPM range.

3. Peak HP will be retained through the life of piston rings due to:

- lightweight forgings

- CP’s exclusive machining techniques and tight processes.

4. Engineered for racing purposes. 

 

CP Pistons Set - Toyota Supra 86-92 cppSC7470-6

 

AWE Resonated Touring Edition Exhaust for A90 Supra - 5" Diamond Black Tips 3015-33132

1. AWE Touring Edition Exhaust is the dilution of aggression and sophistication.

 2. A dual 3” T304L stainless steel downpipe-back configuration is the perfect exhaust system for drivers looking for straight-pipe performance without sacrifice daily driving.

3. Produced a deep and sophisticated exhaust note with zero drone at highway speeds.

4. Gives a handsome 65% increase in flow over stock that will improve horsepower and torque tremendously.

5. The Touring Edition features AWE’s patented drone-canceling solution, 180 Technology®, which targets and omits drone-prone frequencies. 

6. Features:

• 65% more flow than stock - ready for big power
• Patented drone-canceling 180 Technology®
• Massive five-inch double walled AWE tips
• Available as Touring Edition or rowdy Track Edition, both with straight-through designs for max power
• Max gains of 6 hp and 8 ft-lbs of torque at the wheels
• Direct bolt-on, no cutting
• Features a midpipe inlet adapter to allow use with stock and aftermarket downpipes (with outlets of 80mm)
• Resonated and Non-Resonated versions for perfect downpipe-tone tuning
• Handcrafted from 3” CNC mandrel-bent, U.S.-sourced 0.065” wall T304L stainless steel
• Perfect fitment guaranteed
• AWE No CEL guarantee
• Lifetime warranty (one year on tip finishes)
• Proudly engineered, designed, and manufactured in-house at AWE

AWE Resonated Touring Edition Exhaust for A90 Supra - 5" Diamond Black Tips 3015-33132

 

ARMYTRIX Titanium Valvetronic Exhaust System McLaren MP4-12C | 650S 2012-2016 MCM4-DT15M

1. The McLaren M828T engine will roar more with ARMYTRIX Titanium Valvetronic Exhaust System.

2. The famous unrestricted design improved horsepower due to extra flow and amplified sound drastically.

3. Superior high quality construction from mastery TIG welding techniques.

4. Introduced unique ceramic coat outside of exhaust downpipes to give maximum heat insulation, protection from internal acidic corrosion and to last longer.

Performance:

• MP4-12C
• Power ( HP): 31.3
• Torque ( Nm): 33
• Weight Saving (-Kg): 5.1
• 650S
• Power ( HP): 34
• Torque ( Nm): 37.3
• Weight Saving (-Kg): 5.1

Performance:

• Valvetronic Mufflers
• Tail Pipe
• Remote Control Module
• Titanium Matte Black Tips

Features:

• Reduction of Installation Time by 50% compared to traditional cable wires
• Comprehensive Selectable Options
• Real time Update of Selected Categories
• Quick & Accurate Data Logging
• App Controlled Valve System via OBDII Port
• View Install Instructions Here.

Fitment:

• McLaren MP4-12C 2012-2014
• McLaren 650S 2015-2016

Notes:

• Downpipes Sold Separately.
• ARMYTRIX wireless valvetronic wiring is a plug-and-play system, no cutting, alteration or damage will be done to the factory settings.

ARMYTRIX Titanium Valvetronic Exhaust System McLaren MP4-12C | 650S 2012-2016 MCM4-DT15M

 

ISR Performance Mazda Miata NA Circuit Spec Exhaust-(1994-1997) IS-CSEXH-NA

1. The Mazda Miata performance exhaust package features a sleek 2-piece design to unleash better horsepower.

2. The midsection and tail section are standard and with no variations.

3. The exhaust is 2.5'' brushed stainless steel piping and flanges plus a polished stainless steel muffler with a 4'' tip.

4. The current NA Miata exhausts have been tested on the OBD1 & OBD2 1.8L NA Miatas and feature a secondary O2 bung. This will only work with 1.8L NA Miatas 94-97.

NOTE:  Will not work on Euro models

ISR Performance Mazda Miata NA Circuit Spec Exhaust-(1994-1997) IS-CSEXH-NA

 

MBRP 2015-2021 Volkswagen Golf Pro Series 3 Inch Cat Back Dual Split Rear Exit T304 Stainless Steel with Carbon Fiber Tips Exhaust System

1. 2015-2021 VW Golf GTI MK7/MK7.5

2. T304 Stainless Steel

3. 3 inch Cat Back Dual Split Rear Exit

4. (2) Carbon Fiber Exhaust Tips Included

5. 4 inch Outside Diameter

6. 2.5 inch Inlet Inside Diameter

MBRP 2015-2021 Volkswagen Golf Pro Series 3 Inch Cat Back Dual Split Rear Exit T304 Stainless Steel with Carbon Fiber Tips Exhaust System

DINAN FRONT LIGHTWEIGHT TUBULAR ANTI-ROLL BAR - 2006-2013 BMW 12

 

DINAN FRONT LIGHTWEIGHT TUBULAR ANTI-ROLL BAR - 2006-2013 BMW 128I 135I 328I 335I D20-0530

1. Anti roll bar was designed by almost car manufacturers to minimize body roll in every situation.

2. However, they are a bit soft in order to maintain the maximum comfort. 

3. Every Dinan tuned anti-roll bar is built and tuned specifically for each BMW chassis.

4. Minimize the body roll will improve driver’s experience and confident at corners. The handling and steer are significantly improved.

5. Dinan had improve the anti roll bar character as follows:

- Large 28mm size (stock bar is 26.5mm)
- 2 hole bar with 3 possible positions on bar & adjustable length end links
- Tubular (hollow) construction
- Only tubular anti-roll bar with a large range of adjustment on the market
- Lightweight (38% lighter than a solid anti-roll bar of comparable stiffness)
- Less body roll
- More mechanical grip
- More stable at the limit

DINAN FRONT LIGHTWEIGHT TUBULAR ANTI-ROLL BAR - 2006-2013 BMW 128I 135I 328I 335I D20-0530

 

CSF Racing Triple Pass Radiator for BMW M3 E46 7058

1. CSF Radiators are newly built radiators with superior quality for an excellence horsepower improvement.

2. It is not a rebranded cheap radiators that can be found from many competitors.

3. CSF radiators are widely used by professional racing teams such as GMG Racing and Body Motion.

4. Achieved an amazing “Dual liquid laminar flow” from an advance B-Tube technology for better heat transfer rate.

5. Wind tested with 20%-30% more efficiency from stocks.

6. CSF has been in business since 1940 and had manufactured various radiators for different OEMs.

7. The BMW E46 massive horsepower will be well guarded by this high performance radiator from CSF.

CSF Racing Triple Pass Radiator for BMW M3 E46 7058

Invidia 4-2-1 Headers for Honda S2000 HS00HS1HDP

 

Invidia 4-2-1 Headers for Honda S2000 HS00HS1HDP

1. OEM exhaust manifold will deliver OEM performance. 

2. Invidia 4-2-1 Headers for Honda S2000 will give more; reduce weight and back pressure. 

3. It will improve horsepower, torque and throttle response. Will give instant free flow performance as demanded. 

4. Significant performance boost seen with a custom Invidia exhaust system. 

5. Made from SUS304 stainless steel, CNC designed for maximum power.  

6. Advantages: 

• Give your ride a true performance boost with Invidia Headers & Exhaust Manifolds
• Custom made for your specific year, make and model vehicle
• Delivers instant horsepower and torque gains
• Free-breathing design boosts low & mid range torque
• Crafted from polished SUS304 stainless steel with top-quality welds
• Mandrel bends make for optimal exhaust flow
• Beefy computer-cut flanges ensure a perfect fit
• Turbo manifolds spool your turbo quicker, minimizing lag
• Includes a crack-preventing flex pipe on models that require one
• Simple bolt-on installation requires no modifications (most vehicles)
• Your Invidia Headers & Exhaust Manifolds are backed by a 1-year warranty

Invidia 4-2-1 Headers for Honda S2000 HS00HS1HDP