Tubi Style Valvetronic Exhaust Kit Ferrari F12 12-17 tubiTSFEF12C12.050.VC

1. Material: AISI 304 SS

2. Racetrack used only

3. Sound: Tubi sound

4. Valvetronic System: EXCU Valvetronic 

5. End Tip Design: OE

Tubi Style Valvetronic Exhaust Kit Ferrari F12 12-17 tubiTSFEF12C12.050.VC

 

Porsche 997.2 Carrera | S 09-11 Tubi Style Stainless Steel Side Muffler Kit tubiTSPO9972C08.004.A

1. Made from AISI 304 SS

2. Main pipe dimension: 60

3. Racetrack use only

4. Sound: Tubi sound

5. Exhaust valve: No valve

6. Product finish: Polished

Tubi Style Stainless Steel Side Muffler Kit Porsche 997.2 Carrera | S 09-11 tubiTSPO9972C08.004.A

 

ISR Performance Pro Series Suspension Arm Package - Nissan 240sx 95-98 S14

1. This is the most sought Nissan 240SX suspension upgrade from ISR Performance Pro Series Suspension Arm Package.

2. This suspension package was enhanced drastically with Japanese spherical rod bearings, upsized rod ends, rod end dust boots and an upgraded bracing.

3. Definitely with thicker and better materials than factory installed suspension arms and all those associated components.

4. The ISR suspension arm package will inclusive of all primary parts needed for upgrading. 

5. The kit features:

• ISR Pro Series Front Tension Control Rods or Angled Pro Series Tension Rods
• ISR Pro Series Rear Traction Rods 
• ISR Pro Series Rear Toe Control Rods or Angled Pro Series Rear Toe Rods
• ISR Pro Series Rear Upper Control Arm

6. The suspension arms in this package are the same ones found in Patrick Goodin’s professional formula drift race car and are capable of handling the abuse of 1000+ horsepower. 

6. This is among the best suspension arms for drift. These 240SX S14 arms will give a real impressive experience on steer.

7. It is economically designed with pure engineering quality for the best performance in managing any horsepower improvement from 240SX S14.

Get one here now:

ISR Performance Pro Series Suspension Arm Package - Nissan 240sx 95-98 S14

 

SPL Bumpsteer Adjustable Tie Rod Ends E9X/E8X BMW

1. The SPL Bumpsteer Adjustable Tie Rod ends will allow the tie rod end pivot to be relocated.

2. It will correct the bump steer happen from modified caster or lower arm geometry. It will reduce lap times. 

3. For super lowered cars, relocating the pivot point will prevent the tie rod end from binding.

4.The SPL Bumpsteer Adjustable Tie Rod ends will prevent the inner tie rods from breaking or bending when racing.

5. Specifications:

a) ASTM A574 socket head cap bolts used for maximum articulation with minimum tensile strength of 170,000 psi

b) Gun-drilled 2024 aluminum turnbuckles to reduce unsprung weight

c) High misalignment low friction 3 piece Teflon lined FK Heim joints/rod ends

d) 1/2", 1/4" and 1/8" thick stainless steel bump steer spacers for precise adjustment

e) Blue anodized titanium jam nuts

f) Sold as a pair and made in the USA.

6. The application for various models:

2008-2013 - E81, E82, E82M, E87, E88

2006-2013 - E90, E91, E92, E93, M-Series

 

2010 - 2019 - F20, F21, F22, F23

 

2011 - 2020 - F30, F31, F32, F3, F34, F36

 

2014 - 2021 - F80, F82, F83, F87

Get one here: 

SPL Bumpsteer Adjustable Tie Rod Ends E9X/E8X BMW

 

ACT Clutch Kit XT/Street Full Face Toyota Supra Twin Turbo

1. ACT Clutch Kit is a preferred choice for professional drivers.

2.  Utilize exclusive diaphragm design to increase clamp load, reduce deflection and maximize clutch life. 

3. All diaphragms endure a four-stage, heat-treating process for unparalleled performance. 

4. The ACT pressure plates also have precision cover stampings to provide rigidity and consistency. 

5. Built with premium organic materials with high copper content for better heat transfer.

6. The steel-backed lining is adopted for greater burst strength and durability that suite for horsepower improved Supra.

7. These discs also have reduced marcel for faster shift action to complement the ACT pressure plates for a quite operation but with increased strength and reliability.

Special Note:

Legal only for use in competition vehicles which may never be registered, licensed, and/or used on public streets or highways; and also for use in other exempted vehicles.

Get one here:

ACT Clutch Kit XT/Street Full Face Toyota Supra Twin Turbo

DINAN HIGH PERFORMANCE INTERCOOLER - 2007-2010 BMW 3-SERIES Air-To-Air - w/ M-Tech Bumper - E90/E92/E93

 

DINAN HIGH PERFORMANCE INTERCOOLER - 2007-2010 BMW 3-SERIES Air-To-Air - w/ M-Tech Bumper - E90/E92/E93

1.The Dinan intercooler is a high performance intercooler that improve horsepower for BMW E90/ E92/ E93.

2. It gives an excellence 93% increase in total volume, reduce the pressure drop by 0.7 psi and create more efficient heat exchange.

3. The BMW 3 Series E90/ E91/ E92 2007-2010 will produce full power in any conditions due to the reducing of “cool down” time.

4. Engineered by DINAN as a direct replacement for the stock unit with only minor modifications for a lean, clean, factory looks like installation. 

5. Maximum efficiency is realized with larger connector tubing and custom shrouding for maximum efficiency. 

6. Obtained additional 5HP and greater performance in conjunction with Stage 2 Performance Engine Software. 

7. The improved thermal efficiency will also enhance turbocharger reliability. 

8. The improved intercooler is significant to be used altogether with the Dinan oil cooler and Stage 3 Engine Software with increased boost pressure. 

9. An extensive Dyno result: peak power of 398 HP @ 5700 RPM and 429 TRQ @ 4300 RPM was obtained for Stage 3 engine software Dinan Intercooler, Dinan Oil Cooler and Free Flow Exhaust.

10. NOTE: The Dinan high performance intercooler is not compatible with vehicles equipped with Active Cruise Control.

Get one here:

DINAN HIGH PERFORMANCE INTERCOOLER - 2007-2010 BMW 3-SERIES Air-To-Air - w/ M-Tech Bumper - E90/E92/E93

 

Tomei Expreme Ti Full Titanium Muffler Kit Ford Focus ST 13-18

1. This Kit defined a new perspective for a titanium muffler kit with it exemplary design from TOMEI.

2. Lightweight, strong and durable are what it takes to provide a superior performance on exhaust gas management, an excellence horsepower improvement for Ford Focus.

3. A complete muffler kit with all required installation components inclusive of bolts and nuts. Bolt smooth paste to prevent bolts seized under extreme heat.

4. The mid section was connected using spring and clamp instead or conventional flange.

5. Spring gives secure connection and has better flexibility for greater vibration control to avoid possible cracks.

6. Flanges are cut from 8mm thick titanium for best protection from warping and cracking. 

7. Utilize long fiber glass wool for the silencer for better sound control.

8. Specification:

• Material: Titanium
• Main Pipe Diameter: 3.17 inch
• Main Pipe Thickness: 1.0mm
• Center Silencer Diameter: 4.65 inch
• Center Silencer Thickness: 1.00mm
• Main Silencer Diameter: 5.98 inch
• Main Silencer Thickness: 1.00mm
• Exit Diameter: 4.53 inch
• Exit Thickness: 1.00mm
• Flange Thickness: 8.0mm
• Exhaust Noise Test
• Without Sound Reducer: 101 db
• With Sound Reducer: 97 db
• With Sound Reducer ver.2: 92 db

• Kit Includes:
• Main Pipe A
• Main Pipe B
• Main Pipe C
• Silencer
• Silencer Band
• Silencer Band Rubber 152mm
• Flange Gasket 763-2-105
• Flange Gasket 80-2-105
• Flange Gasket 635-2-99
• Clamp Band 79-85
• Spring
• Flange Bolt M10*P1.25 35mm
• Flange Nut M10 P1.25
• Flange Bolt M8 P1.25 25mm
• Flange Nut M8 P1.25
• A/F Sensor Plug M18*P1.5
• Copper Washer M18-1.0
• Sound Reducer ver 2 115
• Hex Key
• Bolt Smooth Paste

9. Fitment: Ford Focus ST 13-18

Tomei Expreme Ti Full Titanium Muffler Kit Ford Focus ST 13-18

 

ARK DT-S Exhaust System for Toyota GR Supra 3.0L (A90) 2021+

1. This is the new DT-S Cat-Back Exhaust System for Toyota GR Supra 3.0L A90 2021+.

2. This new cat-back version was enhanced with new features for greater power, as a horsepower improvement of choice.

3. The valve is fully compatible with OEM valve system.

4. Wider 3” dia piping for the whole system.

5. The 4.5” signature dial layer resonated exhaust tips for greater sound and appearance.

6. The ARK signature performance muffler with Helmholtz resonated chamber to reduce in cabin drone effect.

7. Easy bolt on application.

Get one here:

ARK DT-S Exhaust System for Toyota GR Supra 3.0L (A90) 2021+

 

Progress Tech 05-10 Ford Mustang V6/V8 Front Sway Bar (Tubular 35mm - Adjustable)

1. Minimize the traction robbing body "lean" that rolls part of the outside tires off the pavement. 

2. The Progress Tech Front Sway Bar has bigger stiffer diameter with polyurethane bushings compared to thin and rubber bushings from OEM.

3. More roll stiffness means less body "lean" and the tires stay flatter on the pavement. This gives better drive ability and more grip. 

4. Less body roll will give more traction and faster cornering speeds. It will improve total steer. 

5. The Progress Tech Front Sway Bar is cold formed using custom built precision bending equipment. 

6. MIG (Metal Inert Gas) welded for both laser cut and CNC bar ends for precision fit. 

7. Specs:

-Size: 35mm

-Adjustment Range: 3 holes
-End-links Included: No
-All sway bars are powder coated metallic gray.
-One year limited warranty

Progress Tech 05-10 Ford Mustang V6/V8 Front Sway Bar (Tubular 35mm - Adjustable)

 

Harrison Signature - High Flow Catalytic Converters - Aston Martin V8 Vantage 2005+

1. The Aston Martin Vantage V8 hold great prestige with an exotic, a refined machine it is. More performance enhancement is possible.

2. The Harrison Signature, the high-flow catalytic converters with free-flowing, 200-cell cats will enhance performance drastically~ 16 HP gains.

3. The Aston Martin V8 Vantage will has a deeper and throatier tone with this catalytic converter, without sacrifice any performance.  

4. Without restriction as per OEM, this high flow catalytic converter (HFC) will soar more power.

5. It will give extra performance, faster acceleration and better throttle response with better deep sound experience.

6. Features:

-US-made RathGibson 304 stainless steel

-Water cut 3/8th-inch thick stainless steel flanges

-Special tooling made for a factory OEM fit

Harrison Signature - High Flow Catalytic ConvertersHarrison Signature High Flow Catalytic Converter Aston Martin - Aston Martin V8 Vantage 2005+

SR20DET Garrett bolt on GT2871R-15 .64 AR Turbocharger w/Actuator

 

SR20DET Garrett bolt on GT2871R-15 .64 AR Turbocharger w/Actuator

1. This Garrett GT2871R-15 Turbocharger  - with wastegate actuator (12-14psi) produced 375HP to the wheel for SR20DET with right modifications.

2. Full boost can be achieved as low as 3800 rpm with the .64 a/r T25 style exhaust housing. An awesome horsepower improvement for SR20DET.

3. This GT2871R uses Garrett GT technology; the Dual Ball Bearing GT2871R turbo assembly with T25 style turbine inlet and S15 front compressor housing. 

4. Comes with an internal wastegate pre-assembled and is a direct bolt on replacement for S14/S15 T28 turbochargers

SR20DET Garrett bolt on GT2871R-15 .64 AR Turbocharger w/Actuator

 

Artec Performance Nissan RB V-Band Reverse Rotation Exhaust Manifold 

1. This Artec manifold uses 33MM ID runners along with reduced runner length to aid in turbo response and to reduce lag for better horsepower improvement.

2. Compatible with RB20/ 25/ 26 and weight only at 7.3 kg.

3. It’s a Reverse Rotation design from innovative universal V-Band mounting system, so any Reverse Rotation 50-55mm V-Band turbos can be mounted up.

4. The wastegate along are designed to accommodate 44/45/46mm wastegates. 

5. The internal design of the wastegate runner can accommodate 50mm or larger gates should requirement occur for larger gates.

6. Can utilize on RB20, RB25 or RB26 head. The manifold allows turbos from as small as G25 through to G35-1050 and from PTE 6266 and 6466.

Artec Performance Nissan RB V-Band Reverse Rotation Exhaust Manifold

 

Brian Crower BC0240 Dual Valve Springs / Retainer Kit GTIR/VE

1. The BC SR20VE valve springs and retainer kit is designed for high revving, high RPM engines such as Nissan Pulsar GTi-R.

2. Each dual valve spring is made from a high grade chrome silicone alloy and undergone proprietary manufacturing procedures for consistency.  

3. The retainers are CNC machined from round bar titanium to the exact tolerances to ensure a perfect fit with the valve springs.

 Specs are as follows:

• Seat: 1.550" @ 90lbs
• Open: 1.025" @ 220lbs
• Coil bind: 0.910"
• No Machine Work Required

Note: Works for GTIR/VE engines.

Brian Crower BC0240 Dual Valve Springs / Retainer Kit GTIR/VE

 

VRSF 3.5" N54 & N55 Street Catback Exhaust E90 & E92 07-13 BMW 335i 335is

1. VRSF had introduced the 3.5" Catback Exhaust for BMW N54 & N55 335i. This is the best bet for a high performance horsepower improvement with competitive price offered. 

2. The 3.5" mandrel bent design had reduced flow restrictions present in the OEM system.  Less restriction means more power.

3. The 3.5" Street Catback Exhaust reduced about 42 lbs over the OEM exhaust. This achievement is due to the unique 2 to 1 design from the downpipes through the muffler. 

4. The VRSF street catback mufflers exhaust note is subtle and slightly louder during idle than stock. However it will create a deep and distinctive note at wide open throttle. Thanks to use of a single 3.5" primary.

5. The VRSF 3.5" Catback Exhaust is compatibles for: E90, E91 & E92 BMW 335i & 335is with a N54 & N55 engine.

6. Detail specs:

- Hand crafted TIG weld 3.5” SS/ 100% utilities SS 304

- 40lbs less weight than stock, fully adjustable, clamps and gaskets included

- Mandrel bent, smooth radius bend to increase flow and minimise turbulence, VRSF no hassle lifetime warranty.

7. VRSF street catback application: 2007 - 2012 E90/E92 BMW 335i & 335IS RWD Models Only

VRSF 3.5" N54 & N55 Street Catback Exhaust E90 & E92 07-13 BMW 335i 335is

 

Supertech Forged Aluminum Pistons VQ35 8.8:1 (gasket+Deck height 0.082)

1. Supertech pistons are manufactured from extruded high silicon, an enhanced 4032 alloy (with additional Cu, Ni & Mg. It has low thermal expansion, excellent wear resistance and higher thermal conductivity. 

2. Supertech pistons with an enhanced 4032 alloy can withstand up to 42psi of turbo boost with alcohol, without any problems. A great pistons for horsepower improvement.

3. This exceptional Supertech pistons had undergone 2 or 3 forging steps processes. Give better yields- fine structural grain oriented in fibers with the same direction of the stresses.

4. Several heat treatments transformed the piston into a high tensile strength characteristic and evenly distributed hardness. The pistons follow few machining special steps and in conventional CNC. 

5. They were machined with special diamond tools for super precise dimension, perpendicularity and flatness of the ring grooves. 

Note 1: Contact reduction grooves are standard. Honed & reamed pin bores for precise fit.

6. The Supertech wrist pins are constructed from cold extruded chrome moly steel for high strength intention. They are to be used with wire clip locks.

Note 2: Piston set does not include rings 

Note 3: Piston; For Turbo/Nitrous Applications; For use with Piston Ring SWN30131-0 [Nissan 350z(2003-2009), Infiniti G35(2003-2008)] 

Supertech Forged Aluminum Pistons VQ35 8.8:1 (gasket+Deck height 0.082)