HKS SUPER MANIFOLD R-SPEC + HI-POWER SPEC-L FOR TOYOTA 86 ZN6 FA20 32025-AT001

 

HKS SUPER MANIFOLD R-SPEC + HI-POWER SPEC-L FOR TOYOTA 86 ZN6 FA20 32025-AT001

Compatible Car: Toyota 86 ZN6

Compatible Engine: FA20

Only for 6MT (Applied A-D). Emission test certificate provided. Complied with 2010 noise regulation.

HKS SUPER MANIFOLD R-SPEC + HI-POWER SPEC-L FOR TOYOTA 86 ZN6 FA20 32025-AT001

CSOHARA CUSCO SPL LSD CSO SPEC FOR TOYOTA GR86 ZN8 SUBARU BRZ ZD8 CSOHARA-00105

 

CSOHARA CUSCO SPL LSD CSO SPEC FOR TOYOTA GR86 ZN8 SUBARU BRZ ZD8 CSOHARA-00105

***Compatible Car: TOYOTA GR86 ZN8 SUBARU BRZ ZD8

1. This is an LSD from CSOHARA with an initial setting that has a small rate of change and is highly sustainable. 

2. This LSD support mechanism that is neither a disc spring nor a cam spring.

3. The basic setting is 2WAY/1.5WAY and it is seasoned with the image of the effect of being an extension of the genuine LSD, which dislikes ABS, TRC and VSC intervention.

CSOHARA CUSCO SPL LSD CSO SPEC FOR TOYOTA GR86 ZN8 SUBARU BRZ ZD8 CSOHARA-00105

BLITZ THROTTLE CONTROLLER FOR VOLKSWAGEN GOLF GTI GOLF GTX GF-1JAUM AUM ATSL1

 

BLITZ THROTTLE CONTROLLER FOR VOLKSWAGEN GOLF GTI GOLF GTX GF-1JAUM AUM ATSL1

Type: IV 
Model Year: 01 / 07- 
Chassis Model: GF-1JAUM 
Product Name: THROTTLE CONTROLLER 

Description: 

1. Possible freely controlled accelerator response of the electronic controlled throttle equipped vehicles controller. 

2. Blitz by its own control, sharp response from the sluggish resolved at the time of start, achieve up to eco-driving. 

3. Newly adopted controller with high visibility VA mode liquid crystal, the main unit, product mix by type of vehicle harness. 

4. All uniform by model-only package those required for installation. "Eco mode", "sports mode", "Auto mode" for a total of 20 mode of the standard equipment. 

5. Control method and characteristics are different various modes, you realize there was feeling to your liking. 

6. From among the 20 modes, it was equipped with a "simple mode function" to display only 5 mode of your choice that frequently used. 

BLITZ THROTTLE CONTROLLER FOR VOLKSWAGEN GOLF GTI GOLF GTX GF-1JAUM AUM ATSL1

 

HPS Red Shortram Air Intake + Heat Shield for 15-17 Volkswagen GTI MK7 2.0T TSI Turbo 827-577R-1

** The HPS Performance 827 Series air intake kit features race proven reinforced silicone hoses and industrial grade 100% stainless steel T-bolt clamps which ensures reliability, even during the most extreme driving conditions. 

1. The All-New HPS Performance 827 Series Air Intake Kit (Red, Part # 827-577R) for 2015-2020 Volkswagen GTI 2.0T TSI Turbo offers:

A) A free-flowing 3 inch mandrel-bent aluminum tube induction system designed to produce dyno proven performance gains.

B) Increase horsepower +8.2 whp , torque +11.9 ft/lbs and improve throttle response while maintaining safe air fuel ratio. 

2. The heavy duty powder coated steel heat shield integrates with the factory fresh air scoop to direct cold air to the air filter for the best cooling effect. 

3. The kit does NOT require tuning and does not trigger CEL light. 

4. No modification is required during the installation. HPS light weight mandrel-bent aluminum alloy tube replaces the stock restrictive air box and optimize the air flow with excellent heat dissipation and long lasting durability. 

5. The All-New HPS Performance Air Filter is designed with performance in mind, delivering excellent filtration without sacrificing air flow. 

6. All HPS Performance Air filter are made in the United States.

7. Includes the All-New HPS Performance Air Filter (Washable and Reusable). HPS Performance Air Filter Part Number: HPS-4276- 

8. Includes easy to follow step-by-step installation manual with clear pictures and instructions to guide the installer throughout the whole process. 

9. Aluminum Tubing Color: Red- NOT CARB Complaint- System Type: 827 Series - Performance Air Intake Kit with Heat Shield. Manufacturer Part Number: 827-577R- 

** HPS Performance Air Filter Key Features

Woven cotton filter element- Traps dirt up to 5 microns. Superior airflow without sacrificing filtration.- Washable and reusable, saving you money down the line.

Specially formulated light-weight synthetic oil- Creates an ionic bond with the filter's stainless steel mesh.- Attracts and traps dirt onto the mesh, creating a clear path for airflow.- Will not affect or damage sensors.

Stainless steel mesh reinforcement- Higher resistance to dents over aluminum mesh.

Low pressure injection molding- Effectively minimizes seepage of rubber onto filter element.- Increases airflow by up to 25% compared to high pressure molding.

Manufactured in the USA by Green Filter- Green Filter is the leading manufacturer of world-class filter used by many of the world renowned racing engineers, engine builders, drivers and enthusiasts that regularly "win on Sunday"

Note: All HPS Performance Air filter are designed with performance in mind, and backed by HPS One-Year Limited Warranty.

HPS Red Shortram Air Intake + Heat Shield for 15-17 Volkswagen GTI MK7 2.0T TSI Turbo 827-577R-1

 

Forge Motorsports VW Golf Mk7 GTi 2.0 Silicone Coolant Hose Kit FMKCMK7

Fitment:

Volkswagen Golf MK7 GTI 

Volkswagen Golf MK7 GTI Clubsport ED40 

Volkswagen Golf MK7 R 

Volkswagen Golf MK7.5 GTI 

Volkswagen Golf MK7.5 R

1. This is a set of silicone coolant hoses for the VW Golf MK7 GTi 2.0TSI engine.

2. These hoses are Fluro-silicone lined to allow safe use with OAT type coolants.

3. Available in Red/ Blue and Black. The Forge silicone hoses in this kit have been designed to include an expensive inner liner of modified silicone known as Fluorosilicone. 

4. This means the hoses are suitable to be used with  either modern long-life coolants, Organic Acid Technology coolants (O.A.T.) or air containing oil mist. 

5. The construction of the hoses has been engineered to exceed that of the OEM fitments, and will enhance any engine bay both technically and aesthetically.

6. The use of a Fluorosilicone liner ensures that Forge silicone hoses are the clear market leader. 

**Lifetime warranty, T&Cs apply.

Forge Motorsports VW Golf Mk7 GTi 2.0 Silicone Coolant Hose Kit FMKCMK7

 

Forge Motorsports Blow Off Valve for Volkswagen, Audi, Skoda, Cupra 2.0 2021 Onwards FMDV32A

1. This is a replacement for OEM Part Number 06N.145.710.B.

2. Forge Motorsports valve utilized full billet alloy construction with a piston based internal design gives significant improved reliability over the OEM valves with lightning-fast response. 

3. It has also been proven in performance cars running over 600bhp.

4. Fitment:

Audi A4 2.0 TSI 2021 

Audi S3 2.0TSI (8Y Chassis) 

Audi S3 Sportback 2.0TSI (8Y Chassis)

Cupra Formentor VZ2  Seat 

Cupra Formentor VZ2 

Volkswagen Golf MK8 GTI 

Volkswagen Golf MK8 R

5. Forge Motorsports recommend servicing your valve every 3 years or 20,000 miles, whichever comes sooner.

6. Forge Motorsport is proud to release the latest version of our very popular solenoid driven valve for the 2021-on VAG 2.0 TSI engine (engine codes DNP & DNFB). 

7. This valve is a full replacement atmospheric blow-off valve (i.e. noisy) that integrates seamlessly with the OEM electronics and results in no detriment in performance and absolutely NO fault codes or check engine lights.

8. This valve is fully engineered to remedy the failure issues experienced with the OEM solenoid valves when their diaphragm may rupture which results in a boost leak. 

9. The later revision OEM valves have a longer life but ultimately the plastic brittles and in extreme circumstances, parts of the plastic can break off. 

10. This new valve has a very short overall installed height, which enables fitment of this atmospheric valve into the tight space between the turbo and the inlet hose from the air filter.

11. The older larger valves and sandwich plates will not fit this engine.

12. In The Box: 

1 x FMDV32 Valve 1 x Wiring Harness 1 x Solenoid, Bracket, and Screws 1 x Blue Spring (Uprated) 1 x 5mm Brass T Piece 12 x Cable Ties 1 x 1500mm Length of 4mm Vac Hose 1 x Forge Keyring and Sticker

Forge Motorsports Blow Off Valve for Volkswagen, Audi, Skoda, Cupra 2.0 2021 Onwards FMDV32A

 

AWE Tuning 2015+ Dodge Challenger 6.4L/6.2L Supercharged Track Edition Exhaust - Use Stock Tips awe3015-11050

1. This a rage, amplified “Track Edition” AWE Tuning exhaust for your supercharged Dodge Challenger 6.4L/ 6.2L.

2. For those who like it raw and rowdy, this Track Edition is for you to scale tracks with better performance.

3. The Track Edition shares the same integrated H-pipe and precision engineering as its Touring Edition counterpart, minus AWE's patented drone-canceling solution, 180 Technology. 

4. In place of the 180 Technology resonator in the rear, lies a Track Edition straight section. As a result, this version is known to get (really) rowdy in mid-range acceleration and deceleration and may be too much for many. 

5. Due to this reason, AWE Track Edition Exhausts cannot be returned based on sound preference. You've been warned here.

6. But fear not, if it gets too rowdy, AWE made it easy to convert between Track and Touring Editions through the purchase of a simple Conversion Kit to change your volume.

7. All options are available with 4" double-walled slash-cut tips in either Diamond Black or Chrome Silver, as well as fitments to retain the OEM tips.

AWE Tuning 2015+ Dodge Challenger 6.4L/6.2L Supercharged Track Edition Exhaust - Use Stock Tips awe3015-11050

 

Couture M Speed Front Bumper for Mazda Miata 2006-2008 EXD113797

1. This is 2006-2008 Mazda Miata Couture Urethane M Speed Front Bumper - 1 Piece.

2. Item 100% must be installed by a professional body shop with experience fitting aftermarket body panels. 

3. Some modification/ adjustment/ final fit must be performed for proper fitment. 

4. No returns or refunds.

Couture M Speed Front Bumper for Mazda Miata 2006-2008 EXD113797

 

ECU Masters PNP for EMU Black for Lexus IS300 2001 GS300 '98-'01 WHPIS3001

1. This plug and play adapter harness allows for the installation of an EMU Black in a 2001 IS300 and 98-01 GS300 also JZS161 Aristo, JSX110 and JZS171. 

2. This is a parallel harness, meaning that the original ECU is retained to control the automatic transmission (if applicable). 

3. The ETSC-i throttle body must remain connected to the stock ECU to correctly control the automatic transmission. 

4. For this reason, the EMU will not have control of the ETSC-i TB. Adapter works for both manual and automatic vehicles), dash cluster, HVAC and throttle body. 

What's included?

• Adapter harness
• Intake Air Temp Sensor Kit
• Bosch 4.9 Wideband O2 sensor

Use ONLY the specific Lexus IS300 base map in the Base Maps and Manuals drive. 

ECU Masters PNP for EMU Black for Lexus IS300 2001 GS300 '98-'01 WHPIS3001

 

Couture R32 Sideskirts for Volkswagen GTI 1999-2005 EXD102594

**This is 1999-2005 Volkswagen Golf GTI 2DR Couture Urethane R32 Side Skirts Rocker Panels - 2 Piece

Note: 

1. Couture r32 side skirts are designed for 2dr models only.

2. Item 100% must be installed by a professional body shop with experience fitting aftermarket body panels. 

3. Some modification/ adjustment/ final fit must be performed for proper fitment. 

4. No returns or refunds.

Couture R32 Sideskirts for Volkswagen GTI 1999-2005 EXD102594

 

Collins Performance Technologies JZ to 350Z(CD009) 370Z(JK40C) Swap Kit

1. This is an adaption kit to put a 350Z/ 370Z/ VQ 6-speed transmission behind your 1JZ/ 2JZ series engine. 

2. Collins Performance had combined the best manufacturers to create the ultimate twin-disc combination for the 2JZ / 1JZ engine to 350Z engine/ transmission combination. 

3. Collins Performance is the only company to offer a twin disc clutch system for the 370Z and 350ZHR transmissions, with zero milling of the bell housing as a complete bolt-on kit to the 2JZ/ 1JZ engines. 

4. This translates as one of the best engine and transmission combinations for an affordable price built for harsh racing use. 

5. The 350ZHR and 370ZHR transmissions were made to shift at high RPM's which make them ideal for your Road-racing/ Drifting applications.

6. Collins Performance is meticulous about what Clutch friction material to select for the setup; a great coefficient of friction that results in a non harsh engagement, which results in little to no chatter for such a small diameter clutch system. 

7. Utilizes a light but strong clutch basket to hold the floating components making for a really low moment of inertia for a quicker spool time on your turbo and a faster reaction to driver input.

8. This twin disc clutch system with the proper hydraulic setup will make you  feel minimal clutch pedal force with a broad window of engagement that simulates close to stock pedal feel, with the ability to hold large amounts of torque.

9. Collins Performance currently running this engine/ transmission combination with this same exact twin-disc clutch system in three areas of Formula D, Pro2 and Formula D ProAm cars.

10. The swap kit includes the following pieces:

- Adapter Plate for 2JZ to 350Z Nissan Transmission A custom made CNC'd 1-piece Flywheel that requires No Milling of the bellhousing.

- A Twin-Disc Clutch pack consisting of a machined aluminum basket, 2- solid Cerametallic Nissan splined clutch discs, 1-Pressure plate, and 1-floater plate

- ARP Flywheel bolts, Flywheel adapter, Pilot bushing, Adapter plate bolts to bolt the adapter plate to the engine only.

- Clutch release bearing Adapter(for external slave 350z cd009 transmissions only).

- If you select 370ZHR (JK40B) or 350ZHR (JK40C) transmissions from the drop down menu's the kit will also come with A bearing face converter for the Concentric Slave Cylinder at an additional cost.

11. The adaption Kit does not include:

-The Stock Automatic Flexplate in the pictures is not included (you must supply this). You can use any JZ automatic flex plate, from IS300, GS300, Supra, SC300 etc. Toyota Part # (32101-22050 56907).

-The Stock Automatic Flexplate spacer. This is an approximately 3/16" thick steel spacer that goes against the crank, sandwiched between the flexplate and the crank in stock Automatic 2JZ applications. (this is required).

 -Your selected transmission to adapter bolts (they are same as your existing stock 350Z or 370Z bolts, with washers and you must use a thread locker like Loctite). This adapter plate comes with the hard-to-find M12x1.25 bolts needed to fasten this adapter to the engine.

The average lead time for adapter plates is 30 days. Most adapter plates are in stock, however occasionally some adapters go out of stock. 

*Note - Stage 5 Twin Disc Clutch Kit requires Automatic flexplate and flexplate spacer.

Collins Performance Technologies JZ to 350Z(CD009) 370Z(JK40C) Swap Kit

 

RTR Spec 5 Wide Body Kit - Unpainted (18-23 Fastback, Excluding GT350 & GT500) 406731

1. This is RTR Spec 5 Wide Body Kit - Unpainted (18-23 Fastback, excluding GT350 & GT500).

• RTR Formula Drift Styling

• Widens Front Fender 50mm and Rear Fender 75mm

• Allows for use of Wider Wheels/Tires

• Durable, Lightweight Fiberglass Construction

• Smooth Gel Coat Top Finish

• Professional Installation Required

• Ships Unpainted

• Fits 2018-2022 Fastback Mustang Models, Excluding GT350 and GT500

2. This modern aggressive RTR Styling Spec 5 Wide Body Kit will give your personal 2018-2022 Mustang the same aggressive styling of a track car. 

3. This Body Kit was designed, developed, and tested on Vaughn Gittin Jr’s Mustang RTR Spec 5D Formula Drift competition car. 

4. The Spec 5 Wide Body Kit will widen your front fenders by 50mm and your rear fenders by 75mm allowing you to run much wider wheels and tires on all four corners of your S550 Mustang.

5. The High Quality Fiberglass Construction RTR manufactures their Spec 5 Wide Body Kit from an extremely durable, lightweight fiberglass material. 

6. Giving a smooth, gel topcoat finish and performance this body kit can be painted however you like for a fully customized appearance.

7. Professional installation required as this RTR Spec 5 Wide Body Kit is designed to be installed by a professional body shop. Cutting, welding and major body modifications are required for installation. 

8. This RTR Spec 5 Wide Body Kit will also require prep and primer prior to painting. 

9. What's in the Box:

• (1) Front Flare, Left, 2 piece• (1) Front Flare Right, 2 piece• (1) Rear Flare Left• (1) Rear Flare Right• (1) Fuel Door Cover• (2) Front Fender Liner extension• (70) 10-24 Nutsert• (70) 10-24x 3/4-inch Button Head Cap Screw• (70) #10 Flat Washer• (2) 1/4-20 x 3/4-inch Hex Head Cap screw• (2) 1/4-20 Lock Nut• (4) 1/4-inch Fender washer• (1) RTR Template Sheet• (2) Adhesion Promoter• (12) 1/4-inch Plastic Rivets

RTR Spec 5 Wide Body Kit - Unpainted (18-23 Fastback, Excluding GT350 & GT500) 406731

 

ACT HD Solid Race 6 Puck Clutch Kit - Toyota 2JZGTE ACTTS4-HDR6

These ACT heavy-duty (HD) clutch kits offer a clamp load increase of 20 to 50 percent, increasing torque capacity. 

The pedal feels stock to moderate with these clutches. Many are SFI-certified to ensure safety.

• Premium ceramic friction materials provide high-heat tolerance, high coefficient of friction and low wear rates.
• All friction pads are measured, sorted and matched before assembly to ensure that each disc is uniform in thickness.
• Carefully broached splines to ensure exact fit onto the transmission input shaft for long spline life and better clutch release.
• ACT provides thicker retainer stampings for increased strength and reliability.
• Top grade rivets are used to securely fasten the part together. Rivet design and rivet materials are carefully selected for maximum strength.
• ACT spring retainers feature wraparound spring windows that provide support and reduce stress concentrations, which are common causes of failure.
• Heavy duty torsional dampening springs are stronger in most cases than standard springs and are provided in the best sizes and spring rates to suit the application.
• All drive plates consist of high-carbon spring steel that is heat-treated and black zinc-plated to resist bending, cracking, fatiguing and rusting, even under severe racing conditions.
• Precision stampings for disc components are manufactured using dedicated tooling. This allows ACT to offer the highest in quality and consistency.
• Most spring-centered assemblies use bushings and cone springs to create frictional dampening, which reduces noise and extends clutch life.
• All race discs are certified as meeting SFI Specification 1.1 and are legal in all racing organizations that require SFI certification.

Torque Capacity: 747 ft/lbs; Clamp Load Increase: 35%; From 4/86 Thru 8/92 Production Date; w/ Pull Type Clutch.

Clutch kit includes the following:

• 6-Puck Unsprung Solid Clutch Disc
• ACT HD Pressure Plate
• New Pilot Bearing
• New Throwout Bearing
• Clutch Alignment tool

ACT HD Solid Race 6 Puck Clutch Kit - Toyota 2JZGTE ACTTS4-HDR6

 

Action Clutch Stage 1 Clutch Kit (1OS) for BMW M3 2001-2006 3.2L DOHC (S54) RWD ACR-3548

**70% INCREASED HOLDING CAPACITY OVER FACTORY KIT

**RECOMMENDED FOR HEAVY-DUTY STREET USE AND MILD TRACK-USE

**REQUIRES ACTION CLUTCH AC111FW FOR PROPER INSTALLATION. Fits both 6 Speed manual and SMG transmission.

1. Action Clutch Stage 1 (1OS) Kits have been designed for vehicles ranging from stock to basic bolt-on cars. 

2. Utilizes a reinforced Steel Backed Copper Kevlar Organic friction material, coupled with a single diaphragm heavy-duty pressure plate.

3. Gives a smooth and reliable engagement without sacrificing the OEM-like pedal feel.

4. Utilizes the Action Clutch patented, fully enclosed spring retainers to keep your car protected at all times. 

5. Every kit is quality checked by experienced engineers (with over 60 years of collective experience) and signed off as safe before being released as a finished product.

**Product type: Stage 1 Clutch Kit (1OS)

**Product weight: 15 lbs

**SFI: 1.1

 

What’s Included

• Sprung Organic Disc
• Single Diaphragm HD Pressure Plate
• Pilot Bearing / Bushing (when applicable)
• Clutch Alignment Tool
Requires AC111FW or AC111FW-AL Flywheel

Action Clutch Stage 1 Clutch Kit (1OS) for BMW M3 2001-2006 3.2L DOHC (S54) RWD ACR-3548