MBRP 3 Inch Cat Back Exhaust System For 11-12 Ford Shelby GT500 Dual Split Rear Race Version 4.5 Inch Tips T304 Stainless Steel MBRPS7260304

1. Specs: T304 Stainless Steel 3 Inch Cat Back Dual Split Rear (Race Version) 3 Inch Cat Back, Dual Split Rear, Race Version-4.5 Inch Tips, T304 Stainless Steel 

2. This is MBRP's Pro Series known for the best performance exhaust system that money can buy. Designed and built for the only serious enthusiast.

3. Details:

• 2011-2012 Ford-Shelby GT 500
• 3 Inch Cat Back
• Dual Split Rear
• Race Version
• T304 Stainless Steel
• This exhaust has an aggressive exhaust tone
• 2011-2012 Ford Shelby GT500
• 4.5 inch OD Tip Included

MBRP 3 Inch Cat Back Exhaust System For 11-12 Ford Shelby GT500 Dual Split Rear Race Version 4.5 Inch Tips T304 Stainless Steel MBRPS7260304

 

Tomei Full Titanium Exhaust System for R35 TB6070-NS01A

1. This is a high performance and super lightweight design exhaust system for R35. Great for horsepower and torque improvement.

2. The beast R35 full potential will be unleashed with this new FULL TITANIUM EXHAUST SYSTEM from Tomei.

3. COMPLETE SYSTEM INCLUDING MID SECTION COMPATIBLE WITH STOCK DIFFUSER

4. WEIGHT COMPARISON:

- STOCK: 66.69lbs(30.25kg) 

- TOMEI : 31.75lbs(14.40kg)

- 34.94lbs (15.85kg) of weight reduction 

5. KIT CONTENTS
- MID PIPE LH　(1)
- MID PIPE RH　(1)
- Y PIPE　(1)
- MAIN PIPE A 　(1)
- MAIN PIPE B　(1)
- SILENCER LH　(1)
- SILENCER RH　(1)
- SILENCER BAND LH1　(1)
- SILENCER BAND LH2　(1)
- SILENCER BAND RH1　(1)
- SILENCER BAND RH2　(1)
- EXHAUST TIP LONG　(2)
- EXHAUST TIP SHORT　(2)
- SILENCER BAND RUBBER　(4)
- GASKET　(2)
- FLANGE NUT M10 　(4)
- A/F SENSOR PLUG 　(1)
- COPPER WASHER (1)
- FLANGE BOLT M8　(4)
- FLANGE NUT M8　(4)
- CLAMP BAND 104-112 　(2)
- CLAMP BAND 79-85 　(8)
- BOLT SMOOTH PASTE　(1)
- THERMAL INSULATION SHEET　(1)

Tomei Full Titanium Exhaust System for R35 TB6070-NS01A

 

ARMYTRIX Titanium Valvetronic Exhaust System Ferrari 488 2015-2018 FF488-C

1. Harnessing the complete power of the 4.5L V8 engine with ARMYTRIX fully titanium valvetronic exhaust. 

2. Only weight at 9.5kg with free flowing system created by unobstructed passages creates the overall feel and sound of the 4.5L V8 engine.

3. The accelerated cycle improves the horsepower and torque tremendously. 

4. Super fine ARMYTRIX' shock and awe exhaust note will capture everybody’s full attention. 

Features:

• Reduction of Installation Time by 50% compared to traditional cable wires
• Comprehensive Selectable Options
• Real time Update of Selected Categories
• Quick & Accurate Data Logging
• App Controlled Valve System via OBDII Port

Fitment:

• Ferrari 488 GTB 2015-2018
• Ferrari 488 Spider 2016-2018

ARMYTRIX Titanium Valvetronic Exhaust System Ferrari 488 2015-2018 FF488-C

CUSCO Supercharger Kit for Toyota 86 ZN6 BRZ ZC6 ZENKI 965 720 B

 

CUSCO Supercharger Kit for Toyota 86 ZN6 BRZ ZC6  ZENKI 965 720 B

1. The FA20 engine is well known for high response and sporty performance with high compression ratio.

2. To tap this advantage, CUSCO had developed an excellence supercharger to exploit the power and torque.

3. The horsepower improvement and driving matched to the 3.0L NA large displacement engines.

4. Plumbing CPU separate setting is required with 4 hours estimate installation time.

5. To consult with shop before purchasing to use CUSCO flash memory system (separate sold) or reset the ECU.

CUSCO Supercharger Kit for Toyota 86 ZN6 BRZ ZC6  ZENKI 965 720 B

 

Mines Silence VX Pro Titan II Exhaust Nissan Skyline R35 GTR 09+ C100470

1. The VX Pro Titan II exhaust is made of ultra light, strong titanium and will give better performance with significant weight reduction. 

2. Giving a very smooth rev from low ranges to the red line, this exhaust tremendously improved the throttle response in turbocharged engine. 

3. In Japan, this exhaust is JASMA approved.

Material - Titanium
Main pipe diameter - 80
Exit diameter - 120 x 4

4. All Mines products are special order from Japan. Circa 6 - 9 weeks to ship out with no returns at all.

Mines Silence VX Pro Titan II Exhaust Nissan Skyline R35 GTR 09+ C100470

 

HKS Hi-Power Muffler SPEC-L for Subaru BRZ GR86 FA24 '22+ hks32016-BT004

1. HKS had specialized in the aftermarket high performance auto parts engineering and manufacturing.

2. Formed in 1973 and named after the founders Hasegawa, Kitagawa, and Sigma,

3. HKS began tuning engines and cars with a vision to tune and manufacture high performance engine components and turbo kits that surpasses OE Manufacturers.

4. Features:

• Exclusive to the US market, slightly louder than Japanese model 32016-AF101, but within 89db.
• Constructed ultra thin, almost weights the same with titanium.
• Similar sound with one of highest selling exhaust systems for FR-S/BRZ model.

4. Fitment:

• Subaru BRZ FA24 2022
• Toyota GR86 FA24 2022

HKS Hi-Power Muffler SPEC-L for Subaru BRZ GR86 FA24 '22+ hks32016-BT004

Kansai Service R Titanium Dual Muffler for Nissan GT-R R35 KEN005

 

Kansai Service R Titanium Dual Muffler for Nissan GT-R R35 KEN005

1. Lightweight and high-strength titanium is used that give unique titanium built exhaust.

2. The dual structure after the second catalyst improves the engine response at entire range.

3. This R Titanium exhaust is only 9.9kg VS 18kg stock.

4. Improve horsepower and torque significantly.

5. Greatly improve vehicle kinetic performance. 

Kansai Service R Titanium Dual Muffler for Nissan GT-R R35 KEN005

 

Tubi Style Valvetronic Exhaust System Ferrari 812 Superfast 2017-2021 tubiTSFE812C17.050.VC

1. Material: AISI 304 SS

2. For Racetrack Use Only

3. Sound: Tubi Sound

4. End Tips Design: OE

5. Product Finish: Polished

Tubi Style Valvetronic Exhaust System Ferrari 812 Superfast 2017-2021 tubiTSFE812C17.050.VC 

 

Xcessive Differential Reinforcement for BMW E36 B-E36-DR

1. The differential cover will break when you start running your E36 hard.

2. The clutch drops and hard launches can crack the mounting ears causing the differential to jump around and damage other components.

3. The Differential Reinforcement can be installed directly over stock bushings or aftermarket bushings that are made to factory dimensions such Xcessive solid urethane versions. 

4. Just pull the two bolts on the diff ears and the 4 bolts on the cover, then put the reinforcement on with the new supplied hardware.

5. Kit includes:

- Powder coated steel reinforcement frame

- New differential bushing bolts

- New differential cover bolts

Xcessive Differential Reinforcement for BMW E36 B-E36-DR

 

 

Corsa 96-02 Dodge Viper GTS 8.0L V10 Polished Sport Cat-Back Exhaust w3in Inlet cor14119

1. Aggressive Performance Sound

2. No Drone 

3. RSC technology eliminates "problem" frequencies that cause interior drone/resonance at cruising speeds. 

4. Improved Horsepower And Torque

5. Patented non-restrictive Straight-through design reduces back pressure and frees up additional power. 

6. Potential For Better Fuel Economy

7. Less back pressure and more power for engine 

8. Premium 304L Stainless Steel Construction

9. Limited Lifetime Warranty

10. Included All Necessary Hardware And Full Color Instructions

11. Come with top quality 304 SS TORCA Clamps

12. Handcrafted In The USA, manufactured in Berea, OH, USA.

Corsa 96-02 Dodge Viper GTS 8.0L V10 Polished Sport Cat-Back Exhaust w3in Inlet cor14119

 

APEXI - N1 EVOLUTION-X EXHAUST MAZDA MIATA MX-5 (ND5) 16+ AXLEBACK 164-Z001J

1. The N1 Evolution Extreme is based on the proven performance basics of the N1 muffler

2. Emphasize an optimum exhaust efficiency via a straight-thru layout design.

3. Equipped with an internal hybrid silencer uniting power and free flowing characteristics with effective functional sound resonance. 

4. A newly adopted muffler tip completes the tail end of the exhaust that serves both purposes of function and form.

5. Constructed with a light weight titanium material rolled and riveted onto a double pipe structure.

6. Double pipe structure acts as a diffuser enabling temperature reduction, meanwhile retaining a sporty heat gradiation appearance.

7. PRODUCT FEATURES:

- High-level of quality using TIG-welded SUS304 stainless steel uniting quiet performance with high-power performance gains.

- Matched and manufactured for select chassis

- Patented Megaphone piping structure to produce excellent torque and throttle response throughout the power band. 

- This piping design allows for a swirling exhaust gas flow effect that has for years produced proven results.

APEXI - N1 EVOLUTION-X EXHAUST MAZDA MIATA MX-5 (ND5) 16+ AXLEBACK 164-Z001J

SARD TI-Z Muffler for Toyota Supra DB42 DB02 23006

SARD TI-Z Muffler for Toyota Supra DB42 DB02 23006

1. Main both pipe are made from ultra lightweight titanium.

2. Creates a unique sound from typical titanium construction material.

3. Adjustable length tail end. Can be adjusted to suitable aero and preference.

4. Type: 4 left and right.

5. Material: Full titanium

6. 7.9kg VS 16.8 kg (stock)

7. Main pipe diameter: 70mm

8. Tail pipe diameter: 100mm x 4

SARD TI-Z Muffler for Toyota Supra DB42 DB02 23006

MUGEN Sports Exhaust System for S2000 1800-XGS-K4S0

 

MUGEN Sports Exhaust System for S2000 1800-XGS-K4S0

1. Compatible models: AP2-100, 1-100, AP1-130,-135,-200

2. Design concept of affinity and low exhaust pressure plus straight structure.

3. Utilize high-cost glass wool- excellence for durability and resistance to sound deadening material. 

4. Also very good against hard silencing technology that reduce exhaust resistance.

5. Manual TIG for superior accuracy and quality joints.

6. 11.9kg VS 23kg (stock)

7. Maintain power on entire range with unique hard sound while torque increases.

8. An excellence horsepower improvement and performance gain exhaust system by MUGEN.

9. Safety standard conformity of JASMA approved with private sticker.

MUGEN Sports Exhaust System for S2000 1800-XGS-K4S0

Gruppem Exhaust System Full Titanium for BMW E46 M3 3.2L BL32 B3CSL EXI-0116

 

Gruppem Exhaust System Full Titanium for BMW E46 M3 3.2L BL32 B3CSL EXI-0116

1. Gruppem Original Parts: Made in Japan

2. Material: Titanium

3. Main Pipe Diameter: 60mm

4. Silencer Outer Diameter: 100mm

5. Tail Design: 70mm dual left and right out

6. Weight: 5kg

Gruppem Exhaust System Full Titanium for BMW E46 M3 3.2L BL32 B3CSL EXI-0116

 

Flowtech 2005-08 Corvette 6.2L Axle-Back Exhaust Exhaust System Kit - 51602FLT

1. Flowtech exhaust products are the perfect combination of quality and value for the best performance.

2. This Axle-Back Exhaust Kit fits the 2005-2008 Corvette 6.2L

3. Tube geometry design for maximum ground clearance.

4. Specs: 

- Brand: Flowtech

- Emission code: 5

- Exhaust series: Flowtech

- Material: SS304

- Muffler type: Absorption 

- Product type: Exhaust system

- Sound level: Aggressive 

- Special offer: Clearance

- System type:  Axle- Back

- Tubing: 2.5”

- UPC: 090127733158

- Part number: 51602FLT

Flowtech 2005-08 Corvette 6.2L Axle-Back Exhaust Exhaust System Kit - 51602FLT

 

Revel Medalion Touring Axle Back Exhaust for Nissan 350Z T70063R

1. The MEDALION TOURING is matured, well defined, elegant and matches the highly tuned engines.

2. Using the all new 'continuous strand' ADVANTEX packing material technology to achieve extremely high level of exhaust system efficiency.

3. Maintained a street drivable with extremely low frequency and deep tone well under 93db for discreet sports.

4. The Revel Medallion Touring-S exhaust system is constructed from full SUS304 stainless steel for corrosion resistance & durability, 

5. The 1.5mm wall thickness piping will increase strength and reduce resonation. 

6. Mandrel bent piping to retain the same piping diameter at the bends to optimize exhaust flow characteristics. 

7. The Medallion Touring-S exhaust system is fully hand TIG welded and utilizes laser cut flanges that are stronger for more durable connections.

8. The Advantex packing material offers superior flow characteristics while offering great sound suppression.

9. It is a highly advanced muffler packing material that greatly excels over other types such as loosely-packed fiberglass materials and composite cube types. 

10. It is heat resistant up to 1200º F and extends the functional life of the exhaust system.

11. Minimize bends design concept is a goal of each custom-built Revel exhaust system.To minimize restriction.  

12. Compact muffler canisters offer optimal ground clearance for lowered vehicles. 

13. Fits 2003-2008 Nissan 350Z

Revel Medalion Touring Axle Back Exhaust for Nissan 350Z T70063R

 

MagnaFlow Exhaust - Street Series V6 Camaro 10-15 mag15353

1. Made in the USA and engineered to last. An excellence horsepower improvement exhaust system.

2. MagnaFlow Street Series Performance Exhaust systems deliver the smooth deep sound and the wide-open performance power.

3. Feature straight-through flow designs for the ultimate in unrestricted horsepower and torque for big power while maintaining exhaust efficiency. 

4. These systems are an engineered balance of interior and exterior noise levels and are tested against SAE j1169 standards. 

• All Mandrel Bent Tubing 

• 409 Stainless Steel Construction 

• Increased Horsepower and Torque 

• Lifetime Construction Warranty 

• Made in USA

5. Features:
Piping: 2.50in
Tip Size: 4.00in
Tip Style: Polished Stainless
Muffler: 5x8x14in
Exit Quantity: Dual
Muffler Body Shape: Oval
System Type: Cat-Back
Tip Quantity: 2
Muffler Body Material: Stainless
Sound Level: Moderate
Tip Type: Double Wall/Angle Cut
Exhaust Pipe Material: Stainless
Exit Location: Dual Split Rear
Main Piping Diameter: 2.5
Muffler Body Finish: Polished
Muffler Body Length: 14
Tip Finish: Polished
Muffler Configuration: Offset/Center
Muffler Outlet Diameter: 2.5
Muffler Overall Length: 14
Tip Length: 7
Tip Shape: Round
Attachment Style: Clamp-On
Color/Finish: Stainless
Material: Stainless
Muffler Body Diameter: 5 x 8
Muffler Body Width: 8
Muffler Type: Straight-Through
Tip Material: Stainless
Tip Diameter: 4
Exhaust Inlet Connection Type: Clamp-On
Muffler Inlet Diameter: 2.5
Components: Band Clamp=4
Muffler Body Height: 5
Muffler Quantity: 3

MagnaFlow Exhaust - Street Series V6 Camaro 10-15 mag15353

 

ISR Performance Mazda Miata NB Titanium Circuit Spec Exhaust-(1999-2005) IS-CSEXH-NB-Ti

1. The all new Titanium Circuit Spec features the same great styling of the standard Circuit Spec exhaust.

2. BUT is fully constructed out of Titanium, resulting in a super light weight and unique sounding exhaust.

3. This exhaust features a 3 piece design. The front and mid section are made using 2.5" Titanium with a slip fit joint. The rear section utilizes a titanium muffler with 4" tip. 

4. Features:

• 1x Titanium muffler with 4'' tip
• 1x Mid Section
• 1x Front Section
• 2x 2.5" Exhaust gaskets 
• 4x bolts
• 4x Nuts
• 1x Clamp

5. IMPORTANT NOTE3

• This exhaust has not been tested on the turbo mazdaspeed model

ISR Performance Mazda Miata NB Titanium Circuit Spec Exhaust-(1999-2005) IS-CSEXH-NB-Ti

 

Scotidi 05-14 Mustang Drift Spec Control Arm Set - With Spindle Adapter 001-008-0264

1. Minimal Design, Maximum Angle.
• 2 piece arms make caster adjustments on the car easy!
• Capable of 70° of steering angle! (depending on wheel size/offset)
• Minimum 2.5" over stock length
• Adjustable Length
• Rod end rear mount point that replaces the soft bushing
• All solid rod end connections, no bushings
• Can be used with stock spindle using the included adapter kit
• Wrinkle black powdercoat

2. For track use only, not D.O.T approve.

Scotidi 05-14 Mustang Drift Spec Control Arm Set - With Spindle Adapter 001-008-0264

 

VRSF 3.5" N54 & N55 Race Catback Exhaust E90 & E92 07-13 BMW 335i 335is vrsf10902025

1. The VRSF 3.5" Catback Exhaust for N54 & N55 335i is the best for significant horsepower improvement.

2. The 3.5" mandrel bent design significantly reduces flow restrictions present in the OEM system which results in faster spool and MORE POWER.

3. Race Catback: The race version of this exhaust eliminates the muffler and shaves an additional 14 lbs of weight over the standard street exhaust. 

4. The Race Version is a bit louder than the street version and is the best for track use.

5. Features:

• Hand crafted, TIG welded 3.5" stainless steel.
• 100% 304 grade stainless steel construction.
• Over 40lbs of weight savings over the stock exhaust
• Fully adjustable/replaceable tip design.
• Mandrel bent, smooth radius bends to decrease turbulence and increase flow.
• Gaskets & Clamps included.
• VRSF-No Hassle-Lifetime Warranty.

6. Application: 

- 2007 - 2012 E90/E92 BMW 335i & 335IS - RWD Models Only

7. Note: 

- This exhaust was designed to fit RWD Models only. This will not fit XI or convertible models.

VRSF 3.5" N54 & N55 Race Catback Exhaust E90 & E92 07-13 BMW 335i 335is vrsf10902025

 

HKS Lexus IS-F SSM Exhaust (2008+); Includes: SUS304 Y-pipe & rear sections hks32023-AT001

1. Produce high frequency sport sound right after acceleration. 

2. An exhilarating sporty sound from the SSM begins the moment the accelerator is pressed.

3. Not too loud while cruising. Quiet at idling. 

4. Echo out a true performance sound quality whether on idling, daily driving or during spirited driving. 

5. HKS used the latest sound control technology to develop exhaust systems that are tuned to the driver’s desire.

HKS Lexus IS-F SSM Exhaust (2008+); Includes: SUS304 Y-pipe & rear sections hks32023-AT001

 

5 Zigen SP Street Catback For Nissan R35 GT-R SP1002

1. Zigen in collaboration with Esprit Japan had developed a street exhaust system for the R35 GTR. 

2. To the goal is to achieve linear power gain all through out the rpm range.

3. Specs:
- 304 SUS Stainless Piping
- 80mm high flow main pipe split into 60.5mm dual pipe rear section
- Inconel flamed exhaust tips
- 25 lbs weight VS stock 42 lbs
- 90 decible noise level
- Special order ~ 2 to 3 months lead time, - - - 100% pre-payment needed at time of order with no cancellation.

5 Zigen SP Street Catback For Nissan R35 GT-R SP1002

 

 

Tubi Style Race Catalytic Converter 280hp Alfa Romeo Giulia Veloce 2016 TSALFGV16.303.A

1. Material: AISI 304 Stainless Steel

2. Main Pipe Dimension: 65

3. Catalytic Converter Removal: 200 cells

Tubi Style Race Catalytic Converter 280hp Alfa Romeo Giulia Veloce 2016 TSALFGV16.303.A