1. This is a 4-piece muffler kit that can be used with the FL1 genuine muffler garnish removed, or with SEEKER TYPE-2 muffler dedicated muffler garnish (sold separately) installed.
2. This high performance muffler kit gives a high level of performance with genuine ECU or when boosting up with a tuned ECU.
3. Durability was emphasized rather than weight reduction such as each pipe and flange thickness.
4. With an oval shape silencer, a large capacity can be secured, stable noise reduction performance is achieved without relying only on sound deadening materials.
5. Possible to minimize the increase in volume due to deterioration over time, which is an issue in turbo cars. Advantage to be used for a long time compared to the muffler designed with a cannonball type silencer.
6. For FL1, when exhaust efficiency is the target and the muffler volume is increased, there is a tendency for "boiling noise" to occur especially around 3000-4500 rpm.
7. The ultimate goat at SEEKER is to achieve a high level of compatibility between "exhaust efficiency" and "reducing muffled noise as much as possible."
8. Installing more silencers, optimize the internal structure of the silencers resulted in significant reduction in muffled noise. It will also enhance a turbo-like exhaust sound and a highly balanced exhaust efficiency.
9. The finisher of this muffler KIT is a 90Φ4 inner curl/slash specification. When boosting up with a tuned ECU, etc., you can use the optional FRONT PIPE together to achieve a higher level of performance. It is also effective when you want more punch in the volume.
*There is a tendency for the volume to increase by about 2dB compared to when only this muffler KIT is used. This product is a set of intermediate pipe + tail silencer.
*Front pipe is sold separately.
*The image with text is the one with this product installed with the genuine muffler garnish removed (dedicated muffler garnish not used).
*All images without text are when the separately sold TAKEGAWA muffler garnish is installed at the same time. A muffler garnish is not included with this product. be careful.
*Since it is necessary to remove the genuine muffler garnish when installing this product, a special stay (made of stainless steel) that fixes the end part of the genuine diffuser and center rear bumper is included with this product.
*SEEKER dedicated muffler garnish is not included with this product. If you need it, please purchase "Muffler Garnish for FL1" (sold separately).
*If this muffler is installed without using the special garnish (sold separately), the finisher protrusion dimension will fit within the overall length of the vehicle.
*+2dB is a guideline when installed together with SEEKER front pipe (sold separately). Safety standard compliant product (pre-certified) Set product of vehicle inspection compliant intermediate pipe + tail silencer.
*Front pipe and muffler garnish are sold separately. When used together with SEEKER front pipe (sold separately), it will also be subject to vehicle inspection.
No comments:
Post a Comment