Flowtech 1984-1985 C4 Corvette 5.7L 2.25 In Axle- Exhaust System Kit - 11541FLT FL0-211541FLT

1. Featuring:

• Axle-back exhaust systems constructed of 2.25” 18-gauge, 304 stainless steel material maximizing strength and durability.
• Quality welds for strength, longevity, performance and good looks.
• High flow, straight through muffler design produces an aggressive exhaust note under acceleration and a mellow tone at idle.
• 4” polished 304 stainless steel quad tips adding maximum styling to your ride.
• Tube Geometry designed to use factory mounting points for hassle free installation.

2. Specification:

Application	1984-1985 C4 Corvette
Brand	Flowtech
Clearance Category	Exhaust
Emission Code	5
Exhaust Series	Flowtech
Material	304 Stainless Steel
Muffler Type	Absorption
Primary Tube Dia.	2-1/4 inch
Product Type	Exhaust System
Sound Level	Aggressive
System Type	Axle-back
Tubing Diameter (in)	2.25
UPC	090127734346
Part Number	11541FLT

Flowtech 1984-1985 C4 Corvette 5.7L 2.25 In Axle- Exhaust System Kit - 11541FLT FL0-211541FLT

 

Corsa 01-06 BMW 325ici Convertible E46 Black Sport Axle-Back Exhaust cor14559BLK

1. Aggressive Performance Sound- All acoustically styled and engineered to match the make, model and harmonics specific of your car.

2. Each system is designed to match the personality of a car and its owner .

3. No Drone effect- This is what differs Corsa exhaust system with others. 

4. RSC™ technology will eliminate unwanted frequencies that cause interior drone/resonance at cruising speeds. 

5. Will improved Horsepower And Torque. Patented non-restrictive Straight-through design reduces back pressure and frees up additional power. 

6. Potential For Better Fuel Economy. Less back pressure and more power means your engine functions more efficient with better fuel economy.

7. Utilize Premium 304L Stainless Steel for construction for the best performance. 

8. Limited Lifetime Warranty. 

9. Inclusive of all required hardware and Full Color Instructions.

10. Our systems come with top quality TORCA Clamps, that are also 304SS.  

11. 50 State Emissions Legal. No issue on emission. 

12. Handcrafted In The USA, Every system is proudly manufactured in Berea, OH, USA.

Corsa 01-06 BMW 325ici Convertible E46 Black Sport Axle-Back Exhaust cor14559BLK

Injen 2015 Ford Mustang EcoBoost 2.3L Stainless Steel Cat-Back Exhaust SES9200

 

Injen 2015 Ford Mustang EcoBoost 2.3L Stainless Steel Cat-Back Exhaust SES9200

• Direct fit for 2015-2020 Ford Mustang L4-2.3L Turbo
• Full 76MM piping made from premium 304 SS Mandrel-Bent Tubing
• Features Injen's dual oval mufflers to deliver a clean, crisp, distinctively Injen sound
• Also includes Injen’s fully functional, hand-crafted Y-Pipe for smooth, equal airflow to both mufflers
• Beautiful dual 4.5” polished exhaust tips
• Stainless Steel Investment Cast Flange for a Fast and Easy Install
• Hand Crafted and TIG Welded to Perfection for Strength and Durability
• Premium Stainless Steel Hardware and Hangers for a simple install
• No Cutting or Welding Required
• If you're looking to improve sound, power, and looks then this is the system for you!
• Designed and Manufactured in Pomona, CA

Injen 2015 Ford Mustang EcoBoost 2.3L Stainless Steel Cat-Back Exhaust SES9200

 

APR Exhaust - Catback System - MK7 GTI CBK0001

1. This is an excellence catback system from APR Exhaust for MK7 GTI.

2. The APR Catback Exhaust System is mould into MK7 GTI appearance with greater performance and better sound.

3. Built from T304 SS and hand crafted by experts via TIG welding. 

4. The APR Catback Exhaust used straight through brush finish muffler that creates a deep growl without restriction, rasp or drone.

5. This APR catback exhaust system utilized larger piping diameter compared to the factory exhaust system, yet weights 5 lbs less. 

6. Comparison:

- APR 30” OD split to dual 2.5” VS Stock 2.56” OD reduce to 2.36” before splitting.

- APR 4” tips VS Stock 3.15” tips

7. Note:

- This system only fits the pre-facelifted model. For the facelifted model, use CBK0006.

APR Exhaust - Catback System - MK7 GTI CBK0001

 

Gen2 GTX2867R with RB20DET T3 6 Bolt Turbine Housing + 0.5Bar Actuator GRT-TB0-N24-L

1. This is a Garrett GEN2 GTX2867R dual ball bearing turbocharger with RB20DET T3 6 bolt exit turbine housing and compact compressor housing. 

2. It is a drop-in ready RB20DET turbo complete with a 0.5 Bar internal wastegate actuator. 

3. This advance GEN2 billet compressor wheel capable of over 475HP with exceptional all around boost response.

4. Product Features:
• Advanced aerodynamics & ultra high flow Garrett GTX GEN2 compressor wheel
• Forged billet aluminum compressor wheel
• Dual ball bearing CHRA rotating assembly

Gen2 GTX2867R with RB20DET T3 6 Bolt Turbine Housing + 0.5Bar Actuator GRT-TB0-N24-L

 

ISR Performance Single GT Exhaust - Toyota GR86 / FRS / BRZ IS-GT-GT86

1. The ISR Performance Single GT exhaust is a cat back exhaust system made of mandrel bent stainless steel to ensure the highest reliability and quality. 

2. This Single exhaust gives you all the advantages of unrestricted flow to maximum horsepower while retaining a deep and aggressive exhaust tone. 

3. This single GT exhaust is the perfect combination for both naturally aspirated and forced induction applications.

Features:

• Resonated Mid section
• Provides a deep and aggressive exhaust tone
• Lighter then factory exhaust 
• Precision TIG welded Stainless Steel
• Brushed Stainless finish 
• Polished tip and muffler
• 3" exhaust with 4.5'' muffler tip 

Fitment:

• Toyota GR86
• Toyota GT86
• Scion FRS
• Subaru BRZ

What’s in the box:

• 1x  front pipe with resonator box 
• 1x 3'' Muffler section with 4.5" tip
• 2x 2 Bolt 3" Exhaust gasket 
• 4x Bolts
• 4x Nuts 

ISR Performance Single GT Exhaust - Toyota GR86 / FRS / BRZ IS-GT-GT86

 

ARMYTRIX Race Downpipe w/Cat-Simulator Audi RS3 8V 2017-2020 AU8VR-BDD

1. This super efficient downpipe will increase horsepower, improve sound and gives less weight.

2. Maintain power at every torque range and refine deep resonant sound.

3. Another thing to note is that it will eliminate unwanted sound perfectly.

Includes:

• Race Downpipe

Features:

• Reduced weight
• Improved Sound
• Improved Style
• Improved Power

Fitment:

• Audi RS3 8V 2017-2020

ARMYTRIX Race Downpipe w/Cat-Simulator Audi RS3 8V 2017-2020 AU8VR-BDD

 

Tubi Style Stainless Steel Central Exhaust with X Pipe Porsche Carrera | S 997.2 09-11 TSP0997C08.000.AT

1. Material: AISI 304 SS

2. For Racetrack Use Only

3. Main Pipe Dimension: 60

4. Sound: Straight Pipe

5. Product Finish: Polished

Tubi Style Stainless Steel Central Exhaust with X Pipe Porsche Carrera | S 997.2 09-11 TSP0997C08.000.AT

 

Tomei Full Titanium Muffler Exprem Ti for MIATA ND TB6090-MZ06A

1. This is among the best muffler from Tomei for Miata horsepower and torque improvement.

2. Built for the greatest excitement with superior performance to enjoy. 

3. Only 5.8kg (12.8lbs) VS 9.3kg (20.5lbs) stock. With a stunning 3.5kg (7.7lbs) weight reduction.

4. Main pipe: 2.5” (63.5mm)

5. Tip: 3.5” (89.1mm)

Tomei Full Titanium Muffler Exprem Ti for MIATA ND TB6090-MZ06A

 

AAM Competition Mid Pipe - Nissan GT-R

1. The AAM Competition 3” Mid Pipe is the ultimate performance catalyst for the Nissan GT-R. 

2. Built from a highly durable 16-gauge T-304 stainless steel, AAM Competition 3” Mid Pipe replaces your factory mid-pipe for good.

3. It will improve engine horsepower, response and efficiency with an exhilarating Nissan GT-R’s signature exhaust note. 

4. Dyno testing shown a gain of 10-20 AWHP on an otherwise factory equipped Nissan GT-R. 

5. The Non-Resonated Mid-Pipe is only weight at 15lbs VS 30lbs stock.

6. Available in both resonated and non-resonated piping to choose.

AAM Competition Mid Pipe - Nissan GT-R

 

Tubi Style Stainless Steel Race Muffler Ferrari 355 F1 Berlinetta | Spider | GTS 97-99 01059791000R

1. Material: AISI 304 SS

2. For Racetrack Use Only

3. Sound: +Rumore

4. End Tips Design: Oblique Cut

5. Product Finish: Polished 

Tubi Style Stainless Steel Race Muffler Ferrari 355 F1 Berlinetta | Spider | GTS 97-99 01059791000R

 

Tubi Style Race Exhaust System Ferrari 308 GTBi/GTSi 80-83/Ferrari Mondial 8 80-82 01118102000

1. Material: AISI 304 SS

2. For Racetrack Use Only

3. Main Pipe Dimension: 50

4. Sound: Tubi Sound

5. End Tips Design: Oblique Cut

6. End Tip Dimension: D60

Tubi Style Race Exhaust System Ferrari 308 GTBi/GTSi 80-83/Ferrari Mondial 8 80-82 01118102000

 

DINAN BIG TURBO - 2012-2019 BMW F CHASSIS N55 D310-0110A

1. Truly for the racing enthusiast looking for the ultimate upgrade to fully maximize EWG N55 engine horsepower.

2. The compressor with increased in size gives 30% greater that creates additional boost pressures at higher engine speeds while retaining efficiency. 

3. Fully cast turbos manufactured to Dinan specifications with an upgraded thrust system over the stock turbo to ensure a reliable and prolonged life.

4. For maximum power gains, these big turbos are to be paired with the appropriate Dinan tuning; eg. an upgraded intercooler (Dinan Dual Core Intercooler where applicable) to fully regulate the boost increase and deliver a polished product.

5. Features:

- Turbo assembly is compatible with electric wastegate vehicles only.
- Peak power w/ DPT (M2): 446 BHP @ 6500 RPM and 458 LB-FTs @ 4500 RPM with max gains of 101 BHP @ 6500 RPM and 86 LB-FTs @ 4500 RPM when coupled with other Dinan Performance upgrades on 93 octane.

- Peak power w/ Flash (Non-M2): 436BHP @ 6500 RPM and 472 LB-FTs @ 3000 RPM and a max gain of 135 BHP @ 4500 RPM and 172 LB-FTs @ 3000 RPM when coupled with other performance upgrades on 93 octane..

6. Dinan Installation instructions detail a procedure is quicker than BMW's turbo replacement procedure saving the end-user money and time at the shop (Applicable to RWD vehicles only). 

DINAN BIG TURBO - 2012-2019 BMW F CHASSIS N55 D310-0110A

 

Tubi Style Stainless Steel Race Exhaust w/Race Pipes Porsche 997 Turbo | Turbo S 07-09 TSP0997T07.002.A

1. Material: AISI 304 SS

2. For Racetrack Use Only

3. Main pipe dimension: 60

4. Sound: +Rumore

5. Catalytic Converter Removal: Catalytic Converter Removal

6. End Tip Design: OE

Tubi Style Stainless Steel Race Exhaust w/Race Pipes Porsche 997 Turbo | Turbo S 07-09 TSP0997T07.002.A

SPOON F22C Short Block for Honda S2000 AP2 10002-F22-000

 

SPOON F22C Short Block for Honda S2000 AP2 10002-F22-000

1. This is the exceptional short block from SPOON comprised of piston, connecting rod, crank and other associated items in a new cylinder block.

2. The piston used standard size with static balance between piston, connecting rod and pin is within 2g only.

3. SPOON only tolerate 0.02g weight difference for the production.

4. Coupled with super skilled technician that gave superior accuracy versus competitors.

5. A great choice for horsepower improvement for F22C.

SPOON F22C Short Block for Honda S2000 AP2 10002-F22-000

HKS Intercooler Kit for Subaru Impreza GDB EJ207 13001-AF004

 

HKS Intercooler Kit for Subaru Impreza GDB EJ207 13001-AF004

1. Model: GDB/ Year: 04/06-05/05

2. Type: S Type Intercooler 

3. Core size: 600x244x65 front mount.

4. Application for Model E.

5. Not fit for Spec C, stock option fog lamp, stock recirculation.

6. Racing suction (70020-AF103) is required.

HKS Intercooler Kit for Subaru Impreza GDB EJ207 13001-AF004

TOMS Exhaust System Barrel Titanium Tail for Toyota Supra DB02 17400-TDB02

 

TOMS Exhaust System Barrel Titanium Tail for Toyota Supra DB02 17400-TDB02

1. Offer a great security and compatible with tight standard for the best experience.

2. Reference Frequently Value: 85db

3. Standard Frequency Value: 80db

4. Tomusriya Diffuser ( 52159-TDB42), dedicated product RZ grade (DB02 R2.5-).

5. Release in 2019 as an excellence alternative for great horsepower improvement.

6. Pipe diameter: 60.5mm, tail 120 x 90 oval offset 4 pieces left and right.

TOMS Exhaust System Barrel Titanium Tail for Toyota Supra DB02 17400-TDB02

KAKIMOTO Racing Class KR Exhaust for Honda Civic FL1 1.5 Turbo L15C H713143

 

KAKIMOTO Racing Class KR Exhaust for Honda Civic FL1 1.5 Turbo L15C H713143

1. This is an excellence exhaust for those that seek to strike balance between performance and compliance, as well as horsepower improvement.

2. With 30 over years of extensive experience in this specific field, KAKIMOTO had developed an outstanding exhaust for tuners. 

3. Specification:

- Grade: LX EX 2WD (FF)

- Model year: 2021/9

- Transmission: 6MT/ CVT

- Close sound level: 90

-Idling sound level: 61

- Pipe diameter: 50-60

- Pieces count: 4

- Weight: 14.9 kg

KAKIMOTO Racing Class KR Exhaust for Honda Civic FL1 1.5 Turbo L15C H713143

 

VR Forged D03-R Wheel Package 20x9.0 20x10.5 Audi RS5 Gloss Black VRF-D03R-20-RS5-GBLK

1. The VR Forged D03-R is a full 1piece forged mono block wheel.

2. The design of this wheel is similar to D03 but with a truly motorsports inspired ring. 

3. Manufactured using a 10,000 ton press and incredibly strong. Perfect matched for any “tuner” style vehicle. 

4. The machine work near the center of the wheel and the stylish outside ring keeps the wheel visually stunning.

Information:

All VR Forged wheels include center caps.

They are designed to work with most OEM TPMS sensors.

Some wheels may require aftermarket lug nuts or bolts.

Weights are estimated from engineering and scale tests.

Wheels are designed to work with OEM brakes and most big brake kits.

All wheels go through extensive testing to meet proper regulations.

Front Wheel Specs for Diameter: 20x10.5

• Diameter: 20x9.0
• Offset: 25mm
• Bolt Pattern: 5x112
• Center Bore: 66.56
• Wheel Finish: Gloss Black
• Wheel Weight (KG): TBA
• Load Racing (KG): 750KG
• Lug Style: Ball Seat
• Recommended Tire Size: TBA 

Rear Wheel Specs for Diameter: 20x10.5

• Offset: 35mm
• Bolt Pattern: 5x112
• Center Bore: 66.56
• Wheel Finish: Gloss Black
• Wheel Weight (KG): TBA
• Load Racing (KG): 750KG
• Lug Style: Ball Seat
• Recommended Tire Size: TBA

Fitment: Audi RS5

VR Forged D03-R Wheel Package 20x9.0 20x10.5 Audi RS5 Gloss Black VRF-D03R-20-RS5-GBLK

 

Mishimoto Performance Aluminium Radiator for BMW 335I/135I '06-'13 (AUTO) MMRAD-E90-07A

1. Mishimoto Performance Aluminium Radiator

is the perfect upgrade to eliminate rising temperatures, improve the horsepower and performance.

2. The Mishimoto 335i/135i radiator is precisely engineered for flawless drop-in fitment that gives 35% increase in coolant capacity.

3. Details: 

• Direct fit for the automatic transmission 2006–2013 BMW 335i and 2007–2012 BMW 135i
• 25% increase in core thickness
• 35% increase in coolant capacity
• Fully brazed two-row aluminum core with robotically TIG-welded end tanks
• Precision designed CNC-machined quick-disconnect fittings mate perfectly with stock hoses
• No modification necessary for installation, functions with all stock equipment
• Includes a Mishimoto Magnetic Oil Drain Plug with high-quality dowty seal
• Mishimoto Lifetime Warranty

4. Kit inclusive of:

(1) Mishimoto Radiator
(1) Magnetic Drain Plug w/ Dowty Oil Seal
Mishimoto Lifetime Warranty

NOTES

Mishimoto recommends checking the coolant hose quick-disconnect O-rings for wear and replacing as necessary in order to prevent future leaks.

Mishimoto Performance Aluminium Radiator for BMW 335I/135I '06-'13 (AUTO) MMRAD-E90-07A