APR Ultracharger Throttle Body Upgrade - 3.0 TFSI - B8/B8.5 S4/S5/A4/A5 MS100128
1. This is the APR Ultracharger System that extensively increases horsepower, torque and maximizes the power potential of the 3.0 TFSI.
2. It removes a massive pre-supercharger restriction, allowing uninterrupted airflow into the supercharger for up to an astonishing 542 HP with APR's Supercharger and Crank Pulleys.
3. The APR's innovative Ultracharger ECU Upgrade gives a smooth and exciting driving experience- included as a free upgrade to all who own an APR Stage II ECU Upgrade.
4. The Restriction from the factory throttle body is a massive power-robbing restriction. Its cross-sectional area is 25% smaller than the supercharger's inlet, causing airflow to plummet at high supercharger speeds.
5. The losses is as high as 33 HP. The APR Ultracharger Throttle Body has cross-sectional area of 28% larger than stock and an additional 5% larger than the supercharger's inlet.
6. It completely eliminates the throttle body as a point of restriction and allows for maximum airflow into the supercharger.
7. The APR Ultracharger ECU Upgrade will gives an outstanding driving experience from a smooth daily driving up to a thrilling wide open throttle acceleration with unmatched performance.
8. The most advanced 3.0 TFSI software to-date will be included as a free upgrade to all who own an APR Stage II ECU Upgrade.
NOTE: Specific software is required to use this system. Software is included. Software compatibility must be checked before purchase.
9. Supported hardware for this system: This system also requires other hardware to function properly, including:
- Supercharger Drive Pulley
- Supercharger Crank Pulley
- High Flow Cats
- Supercharger Coolant Performance System (CPS)
- NGK BKR9EIX plugs gapped @ .024" +/- .002" torqued to 30Nm.
10. The Intake Air Temperature (IAT) must be below 75c. The factory intake snow screen should be removed and intake to be upgraded for maximum result.
No comments:
Post a Comment