SPOON CARBON AIR DUCT FOR HONDA CIVIC FK8 K20C 17228-FK8-000

 

SPOON CARBON AIR DUCT FOR HONDA CIVIC FK8 K20C 17228-FK8-000

Sufficient amount of air will ensure the engine runs efficiently. 

A normally aspirated (N/A) or a turbo engine need high density/ cooler air to become more efficient due to high O2 content on colder air.

Spoon had refined this idea, produced prototypes of air intake duct and testing them on cars/ the bench. For the ultimate test, Spoon installed the air duct to their racing car and ran the 25 Hours at Thunderhill.

The effectiveness of the air intake duct was obviously seen. All drivers came back with positive feedback, experiencing good torque at all rpms making the car easier to drive. 

With higher-than-expected fuel efficiency, Spoon team were able to finish the race first-in-class.

Using data obtained from racing, final modifications were made to finally produce the SPOON SPORTS Carbon Air Duct.

Spoon Carbon Air Duct comes in two separate parts:

1) The air scoop placed inside the front grille, helps to shutout hot air accumulating in the engine bay. 

2) The air duct plate placed inside the engine bay delivers fresh air to the air cleaner box.

**With the stock air intake configuration, air is taken in from inside the front grille, possibly including air heated from the radiator, especially in low-speed corners. 

By placing an air scoop at the very front of the grille, Spoon product ensures the flow of clean air is unaffected from the radiator as well as actively taking in airflow from driving.

The Air Duct Plate placed inside the engine bay ensures delivery of clean air from the air intake scoop.

Without disturbing the well-designed heat insulation structure of the stock intake layout, Spoon Carbon Air Duct helps to secure cooler and stable flow of air for maximum power output of the FK8.

The Air Scoop is made from FRP and the Air Duct Plate is made from Prepreg Carbon/ Kevlar.

Compatible with both the stock bumper or the SPOON Aero Bumper.

**Remarks & special notes:
Compatible with SPOON aero bumpers and genuine bumpers.

SPOON CARBON AIR DUCT FOR HONDA CIVIC FK8 K20C 17228-FK8-000

MUGEN FULL BUCKET SEAT MS-C SET-D FOR HONDA CIVIC TYPE R FL5 81500-XNRC-K0S0-D

 

MUGEN FULL BUCKET SEAT MS-C SET-D FOR HONDA CIVIC TYPE R FL5 81500-XNRC-K0S0-D

Mugen full bucket seat for Civic Type R FL5 was designed with a high level of rigidity and light weight to withstand intense lateral G during circuit driving. 

By optimizing the shape and thickness of the urethane for each part of the body, both holdability and comfort are achieved for your Civic Type R FL5.

Adopts outer mesh fabric to prevent stuffiness even when riding for long periods of time.

Clears FIA standards. Mugen full bucket seat is a product that complies with safety standards. 

*For driver's seat

MUGEN FULL BUCKET SEAT MS-C SET-D FOR HONDA CIVIC TYPE R FL5 81500-XNRC-K0S0-D

 

Eventuri Audi B8 RS5/ RS4 - Black Carbon Intake eveEVE-RS5-CF-INT

The RS5/RS4 Eventuri system uses Eventuri Patent Pending Carbon fibre Housings which gives aerodynamically efficient airflow path from the filters to the throttle bodies. 

It is not just another cone filter with a heat shield but a unique design which invokes the Venturi affect.

Based on an independent dyno graph showing the comparison between the Eventuri and the stock airboxes on a standard RS5, the power is increased through a large portion of the rpm range not just at the peak. 

This translates on the road to increased part throttle and full throttle response with the car pulling much more eagerly to the redline. 

Based on the data, the highest Eventuri VS lowest stock recorded showing a gain of over 32hp at the wheels for RS5.

On the other hand for B8 RS4,  the Dyno  a considerable gain in both torque and power - with 25ft-lb toque gained in the midrange and 25hp gained before peak rpm.

So to speak, significant HP and Torque are clearly gained with this Eventuri unit for Audi B8 RS5/ RS4. A great technology to excite.

Eventuri Audi B8 RS5/RS4 - Black Carbon Intake eveEVE-RS5-CF-INT

 

APR Performance GTC-300 Carbon Fiber Wing for Audi S3 2013-2016 aprAS-106703

The GTC-300 3D airfoil shape allows for optimal airflow that reduces drag yet supplies an effective amount of downforce. 

With a span of 67 or 61 inches and a height of 13 inches, the GTC-300 is an adjustable wing that means serious business. 

Computational Fluid Dynamics (CFD) analysis was performed on this wing to support validation of its aerodynamic design. 

Each GTC Series airfoil is composed of lightweight and durable carbon fiber reinforced polymer (CFRP) composite materials. 

These airfoils contain pre-pregnated woven carbon fiber sheets for superior strength and low weight. 

All CFRP airfoils are made using pre-pregnated composite manufacturing processes (i.e. high-temperature autoclave and vacuum bagging) in high-quality aluminum billet molds. 

Supporting the airfoils are 10mm "aircraft grade" 6061 billet aluminum pedestals that come in a flat black powder coat finish.

Special Note: Mounting bases sit 18" apart (inside-to-inside of upper mounting bracket).

APR Performance GTC-300 Carbon Fiber Wing for Audi S3 2013-2016 aprAS-106703

 

Injen Stainless Steel Cat-Back Exhaust for Subaru BRZ / Scion FR-S SES1230TT

Features:

• HP Gains: +7 hp
• TQ Gains: +8 lb/ft
• Stainless Piping / Titanium Tips
• Dyno-tuned for maximum horsepower and torque gains
• Mandrel bent pipes for restriction free exhaust flow
• Direct bolt on with no modification needed
• Retains all original sensors

Injen Technology's Super SES line of exhaust systems are dyno tuned to compliment their performance intake systems. 

By doing so, the Injen Super SES exhaust provides maximum horsepower and torque gains across the entire power band. 

Injen Super SES parts are manufactured from 100% 304 stainless steel. Each exhaust system features mandrel-bent stainless steel tubing and is TIG welded for strength.

Injen Stainless Steel Cat-Back Exhaust for Subaru BRZ / Scion FR-S SES1230TT

M&M HONDA CARBON INTAKE BOX FOR CIVIC FD2 MUGEN RR 00402-FD2-M001

 

M&M HONDA CARBON INTAKE BOX FOR CIVIC FD2 MUGEN RR 00402-FD2-M001

It is an intake box exclusively for sports injection. 

The important intake box that contributes to power-up by blocking the high heat in the engine room with the ultra-light carbon material. Guide the fresh air of the outside air to the intake manifold. 

Protect the engine by preventing rain, dust, sand and foreign matter from entering. A carbon intake BOX that is indispensable for power-up and engine protection for street users.

The intake diameter is 88φ to 80φ for S2000 / DC2 / EK9, and 78φ to 70φ for K-type engines such as CL7 / FD2 / DC5. 

For further power-up of high-performance engine VTEC-equipped cars, sports injection, which is installed in racing cars and supercars, is installed! 

Since it is controlled by a dedicated ECU, immobilizer, air conditioner installation, idling, car inspection, etc. It is a longed-for tuning part that can be cleared without problems and can be easily driven by owners who are mainly used for commuting to street driving.

You can experience a different dimension with demonstrating of high power and high torque that keeps rivals away be it in sports driving, circuit driving or mountain passes. 

The intake sound from the 4-throttle and the exhaust sound from the muffler play a slight evening tone, exhilaration sporty tone to excite.

Once you push the accelerator, you will be surprised by the response and you will feel like running with the accelerator fully open. 

■ Precautions Intake air pipe KIT is required separately. The length of the air funnel is 33mm for the K engine CL7 FD2 FN2 EP3 DC5. S2000, DC2, EK9 can handle up to 66 mm. It supports sports injection of Toda Racing.

M&M HONDA CARBON INTAKE BOX FOR CIVIC FD2 MUGEN RR 00402-FD2-M001

 

KW V3 Coilover Kit For 09-11 Nissan GT-R 35285006

This the Variant 3 - Race technology for the road with adjustable compression & rebound dampening.

The new Variant 3 is the state-of-the-art technology for the skilled and experienced driver. 

The separate and independent compression and rebound damping options allow a truly individual driving set-up. 

These unique systems with the 3 individually adjustable components, allows for adjustment of the compression of the damper in the low-speed-range, while the highspeed set-up, so decisive for driving comfort, has been pre set by our engineers.* 

- Independently adjustable damping technology - rebound and compression damping:

* - 'inox-line' stainless steel technology

* - Individual height adjustment

* - TÜV-tested adjustment parameters

* - High quality components for long life

* - Comprehensive documentation for ease of use

*Lowering Range* - Front: 0.4"-1.5"* - Rear: 0.8"-1.5"

This product will work for the 2009-2011 Nissan GT-R and GT-R Premium.

KW V3 Coilover Kit For 09-11 Nissan GT-R 35285006

 

Forge Motorsports Big Brake Kit for the VW Golf MK8 R/GTI and Audi S3 8Y FMBKMK8

Fitment: 

1. Audi S3 2.0TSI (8Y Chassis) 

2. Audi S3 Sportback 2.0TSI (8Y Chassis)

3. Cupra Formentor VZ1 VZ2 VZ3

4. Cupra Leon VZ1 VZ2 VZ3

5. Volkswagen Golf MK8 GTI 

6. Volkswagen Golf MK8 R

This is a Big Brake kit with 6 pot calipers and 380mm x 32mm ventilated discs originally for the VW Golf Mk8 GTI/R but also suitable for the Audi S3 8Y and Cupra Formentor/ Leon. 

The discs of this big brake kit are grooved to remove braking residue and maintain an optimum performance. 

Included in the kit are Forge Motorsport braided brake hoses, mountings and brake pads.

It will gives immediate brake pedal response. Given a Lifetime Warranty (brake lines only) with choice of colours.  This Big Brake is compatible with all brake fluids.

It will reduces pedal sponginess under hard braking and will not corrode (brake lines only). This brake kit is supplied with either  Forge Ceramic Brake Pads (FMBKPAD) or EBC Yellow Pads. 

Forge Motorsport supply great product that delivers the ideal combination of Ceramic Braking Technology that aligned with performance, comfort  and reliability.

This is the result from rigorous testing and development that gives exceptional strength and flexibility.

Features unrivalled noise prevention, sustainable performance and comfort  altogether.

Consistent stopping power with long lasting quality brake caliper comes from Forge lightweight six-pot caliper. It is a single-piece aluminium Mono-bloc design. 

This design has been used to maximise rigidity, pedal feel and overall braking performance. 

The caliper incorporates a progressive six-piston setup to give great brake balance and high quality seals increasing resilience to road salts and other corrosive elements.

Provided maximum rigidity, great balance with high quality seals. The mono bloc design gives better pedal feel. The Forge brake discs are the 2-piece floating rotors undergone CNC machined utilizing a lightweight forged billet aluminium rotor hats/ bells. 

The proprietary iron alloy rotor discs come with directional curved vanes for optimized rotor cooling. The slotted rotors allows for dust and gas evacuation, which further adds to long term durability. 

Forge Motorsport brake lines are hand-finished with Teflon-lined braided stainless steel bodies and custom-machined stainless fittings. 

This process resulted in a brake hose that will perform under the most extreme and harsh conditions, whilst still looking good and performing at the highest level.  

Depending on your wheel design, you may need spacers between the hub and the wheel in order to clear the calipers.

Forge Motorsport got a stencil available for you to place behind your wheels to work out fitment. You may email: info@forgemotorsport.co.uk for further information. 

**These kits do not have CE/ TUV approval and are recommended for race use only

Weight: Each Caliper weighs 3.25kg 

Each Disc weighs 9.35kg 

Torque Settings: Carrier to Hub 190-200NM Caliper to Carrier 130NM 

Due to high demand, all of Forge Motorsport kits require normal 14-16 week normal lead time to construct and deliver. 

**No warranty is offered for brake vibration suffered due to uneven rotor thickness wear after incorrect installation of brake rotors. 

It is commonly known in the brake rotor business that accurate mounting and checking of runout on brake rotors is paramount at installation.

Despite necessary warnings, many mechanics still see fit to ignore this warning and complete the fitment without checking the rotor runout. 

This will lead to brake vibration in the 3000 to 5000 miles lifetime period, voiding the warranty. 

The solution for vibration at this stage is to have the rotors turned or replaced, and to thoroughly clean the mounting flange on the vehicle, carefully checking for runout before returning the vehicle to service use. 

Due to the demanding conditions and the harsh nature of the environment brake calipers are subjected to, Forge Motorsport cannot offer any guarantee or warranty on their painted surfaces. 

Cleaning and Maintenance shall follow given procedure.

Forge Motorsports Big Brake Kit for the VW Golf MK8 R/GTI and Audi S3 8Y FMBKMK8

PROJECT MU SCR FRONT GREEN 1PIECE BRAKE ROTORS FOR HONDA CIVIC TYPE-R FK8 BREMBO SCRH132

 

PROJECT MU SCR FRONT GREEN 1PIECE BRAKE ROTORS FOR HONDA CIVIC TYPE-R FK8 BREMBO SCRH132

This is a middle class model that uses FC cast iron material. 

It was developed in-house with improved thermal stability and durability for greater performance.

The fins have an original radiant shape to enhance the heat dissipation effect. 

It can be used in a wide range from street to circuit driving. 

Structure: 1Piece 
Material: High alloy FC cast iron 
Slit: Straight shape / 8 on one side, 16 on both sides

PROJECT MU SCR FRONT GREEN 1PIECE BRAKE ROTORS FOR HONDA CIVIC TYPE-R FK8 BREMBO SCRH132

HKS CARBON BRACE FRONT SET FOR TOYOTA GR SUPRA DB02 DB42 DB22 DB82 83001-AT002

 

HKS CARBON BRACE FRONT SET FOR TOYOTA GR SUPRA DB02 DB42 DB22 DB82 83001-AT002

HKS CARBON BRACE is a joint project with Graphite Design, which boasts the No. 1 usage rate for golf carbon shafts and tour pros. 

It is a brace bar that aims to achieve both ride comfort. In general braces, the strength is secured by adding the mounting part, but there are some braces that have too large interior holes due to passing round pipes.

HKS Carbon Brace Front Set has one more mounting part compared to other companies' products and by providing an inner lid, it can be replaced smoothly.

The interior of the engine compartment and the interior of the rear compartment are made of carbon material, giving it a luxurious finish and it is a product that combines functionality and dress-up effect. 

The brackets on both ends are machined aluminum and with colorless anodized finish to give the beauty and corrosion resistance, with laser-engraved HKS brand logo.

HKS CARBON BRACE FRONT SET FOR TOYOTA GR SUPRA DB02 DB42 DB22 DB82 83001-AT002

 

Corsa 10-14 Audi B8 Black Sport 2.5in Cat-Back Dual Rear Exit Black PVD Polished Pro-Series Tips cor14543BLK

CORSA Performance Cat-Back Exhaust will enhance your Audi B8 driving experience at once. 

It will gives an aggressive performance sound with systems are all acoustically styled and engineered with specific harmonics to your Audi B8. 

There will be  “No Drone” effect with RSC™ technology that eliminates "problem" frequencies that cause interior drone/ resonance at cruising speeds. 

It will improve Horsepower and Torque with patented non-restrictive Straight-Through design that reduces back pressure and frees up additional power. 

Less back pressure and more power means your B8 engine functions more efficiently that translates into better fuel economy 

Utilized premium 304L Stainless Steel material for longer lasting and quality.

Comes with Limited Lifetime Warranty with all necessary hardware and full color instructions.

Corsa systems come with top quality TORCA Clamps, that are also 304SS with instructions for an easy installation.

Corsa systems are all designed to install rearward of the factory catalytic converter with no emissions hassles. 

Just bolt it on and go. Handcrafted in the USA, manufactured in Berea OH, USA.

Corsa 10-14 Audi B8 Black Sport 2.5in Cat-Back Dual Rear Exit Black PVD Polished Pro-Series Tips cor14543BLK

ENDLESS RACING MONO6 SYSTEM INCH UP KIT FRONT FOR PORSCHE 911 997 GT3 RS EEZ6MX973RS

 

ENDLESS RACING MONO6 SYSTEM INCH UP KIT FRONT FOR PORSCHE 911 997 GT3 RS EEZ6MX973RS

Rotor (Dia/Thick): 380x34 (2PCS)
Pad: RCP121

"High rigidity" and "light weight" was proven by this forged monoblock Monoblock caliper "RacingMONO6" - forged with thousands of tons of pressure. 

Four years after conception and one year after the completion of the prototype, ENDLESS repeatedly put the car into test races and changed the specifications many times to suite to the real requirements.

The processing of the highly difficult piston cylinder is done by using advanced special technology. 

The finalized body is finished with super hard alumite treatment. It is the crystallization technology process created by ENDLESS's "endless challenge" that during forging.

Kit contents (main):

Caliper body (ultra-hard alumite) 

Exclusive caliper brake pads 

Mounting bracket 

Large diameter brake rotor 

Brake line for caliper 

Caliper body color: Super hard alumite

ENDLESS RACING MONO6 SYSTEM INCH UP KIT FRONT FOR PORSCHE 911 997 GT3 RS EEZ6MX973RS

GREDDY BLOW OFF VALVE FV2 FOR TOYOTA 86 ZN6 11511217

 

GREDDY BLOW OFF VALVE FV2 FOR TOYOTA 86 ZN6 11511217

YEAR MODEL: April 2012-Jul 2016 
Engine Model: FA20 

YEAR MODEL: August 2016- 
Engine Model: FA20 

The Greddy Blow-Off Valve Fv2 INHERITS THE FLOATING valve structure that was popular with the previous model, while improving its sophisticated design, maintainability, and reliability.

A fidget spinner is used to adjust the spring preload without tools, and the hose union take-out direction of the top cover can be adjusted 360 ° without tools.

The mounting flange and opening have the same dimensions as the GReddy blow-off valve TYPE-RS, RZ, and FV, and can be replaced from the conventional model.

- Top cover: Machined aluminum (silver) with 360 ° rotation function 

- Spring adjustment: Aluminum machined hand spinner specification 

- Body body: Aluminum die-cast (chrome plated) · Dual valve spring 

- Valve: 40φ machined aluminum hard alumite with support spring split structure

GREDDY BLOW OFF VALVE FV2 FOR TOYOTA 86 ZN6 11511217