Porsche, Honda, Audi, Volkswagen, Ford, Dodge,Toyota, Subaru, Mitsubishi, Mercedes

Sunday, December 10, 2023

CAR MAKE T&E [VERTEX] R32 SKYLINE 4DOOR SKYLINE 3P FULL KIT FOR CARMAKETE-02341

 

CAR MAKE T&E [VERTEX] R32 SKYLINE 4DOOR SKYLINE 3P FULL KIT FOR CARMAKETE-02341

CAR MAKE T&E [VERTEX] R32 SKYLINE 4DOOR SKYLINE 3P FULL KIT FOR CARMAKETE-02341

Brand name: CAR MAKE T&E

Series name[VERTEX] R32 SKYLINE 4DOOR SKYLINE 3P FULL KIT

Product number: CARMAKETE-02341


EXHAUSTTECH-JAPAN VARIABLE VALVE EXHAUST SYSTEM FOR FERRARI 458 ITALIA SPIDER EXHAUSTTECH-JAPAN-00001

 
EXHAUSTTECH-JAPAN VARIABLE VALVE EXHAUST SYSTEM FOR FERRARI 458 ITALIA SPIDER EXHAUSTTECH-JAPAN-00001

EXHAUSTTECH-JAPAN VARIABLE VALVE EXHAUST SYSTEM FOR FERRARI 458 ITALIA SPIDER EXHAUSTTECH-JAPAN-00001

Brand: EXHAUSTTECH-JAPAN

Product Description: Valvetronic full exhaust system

Compatible Car: FERRARI 458 ITALIA SPIDER


EXHAUSTTECH-JAPAN VARIABLE VALVE EXHAUST SYSTEM FOR FERRARI 458 ITALIA SPIDER EXHAUSTTECH-JAPAN-00001

SPOON AIR CLEANER FOR HONDA CIVIC FL K20C 17220-FL5-S00

 

SPOON AIR CLEANER FOR HONDA CIVIC FL K20C 17220-FL5-S00

SPOON AIR CLEANER FOR HONDA CIVIC FL K20C 17220-FL5-S00 

Compatible Models: 6BA-FL5

Spoon Air Cleaner for the CIVIC TYPE R (FL5) has been developed to maximize the potential of the air intake system.

The Honda's air intake system is renowned for its innovative method to control the intake pulsation of the normally aspirated engine, optimizing the response and drivability. 

Spoon had moulded into this with it high-performance air intake system distinctively designed to lower the intake air temperature.

Increasing the material density of the air filter allows for a greater particle collection capability but decreases the air flow.

However using filter materials with lower density may allow for greater air flow but you trade in the particle removal capabilities. 

More than that, the excessive air flow may cause a decrease in lower-end torque thus hampering the overall drivability.

The filtration material of Spoon Air Cleaner was carefully developed, optimizing the torque/ power output on the dyno and undergoing numerous real world road testing.

The SPOON SPORTS Air Cleaner was developed to bring out the maximum potential of the CIVIC TYPE R (FL5).

Remarks & special notes:
Maintenance does not require application of filter oil or cleaning with cleaning agent, just blow off dust with an air gun. 

*If it is particularly dirty, wash it with water using a neutral detergent, let it dry naturally and then reattach it.

ISR Performance Driveshaft - S14 240SX KA/SR Non ABS - Aluminum IS-DS-KASRS14-A

 

ISR Performance Driveshaft - S14 240SX KA/SR Non ABS - Aluminum IS-DS-KASRS14-A

ISR Performance Driveshaft - S14 240SX KA/SR Non ABS - Aluminum IS-DS-KASRS14-A


This is S14 240SX with KA/SR 5 Speed Non ABS Aluminum Shaft. 

This is the ISR one piece driveshaft conversion for the 240SX platform. 

The shaft is built using Dana/ Spicer solid high performance u-joints. 

By removing the factory 2-piece shaft and installing a single shaft the car will feel more responsive due to the fact the rubber carrier bearing is not moving up and down during acceleration. 

Please Note: Verify if you are using a non abs or abs differential to determine which driveshaft you need. 

The change in differential will change the length of the driveshaft. 

Be sure to check your vehicle before ordering. 

This shaft is a replacement for your OEM driveshaft and will eliminate the carrier bearing 

** Built to order 1 week lead time **

Saturday, December 9, 2023

Clutch Masters FX300 Clutch Kit - Toyota 2JZGTE 16-000-HDTZ


Clutch Masters FX300 Clutch Kit - Toyota 2JZGTE 16-000-HDTZ

Clutch Masters FX300 Clutch Kit - Toyota 2JZGTE 16-000-HDTZ


Features

  • Heavy-duty street & racing system
  • Holding capacity 110% over stock
  • Heavy-Duty reinforced pressure plate
  • Hi-Leverage pressure ring design
  • Sprung hub/cushioned disc
  • Steel backed Segmented Carbon/Kevlar

Includes

  • Pressure Plate
  • Clutch Disc
  • Throw-out Bearing (when applicable)
  • Pilot Bearing or Bushing (when applicable)
  • Alignment Tool

1. Segmented Kevlar Steel Back System from Clutch Masters is 110% over stock on holding capacity.

2. The FX300 System uses the Power Plus I Pressure Plate with the Steel Back Segmented Kevlar disc. 

3. This clutch is designed for the ultimate street enthusiast or weekend racer running a normally aspirated car equipped with cylinder head work and/or hotter cam(s), or with medium-boost turbo or super-charger, or up to 100hp NO2

4. The FX300 features only slightly increased pedal pressure (overstock components), long life disc and smooth engagement.




SPC Porsche Adjustable Trailing Link Pair SPC72630

 

SPC Porsche Adjustable Trailing Link Pair SPC72630

SPC Porsche Adjustable Trailing Link Pair SPC72630


This is among the best upgrade for your Porsche 996 986 front or rear non-adjustable factory trailing arms, it is a fully adjustable arms from SPC Performance. 

Constructed from forged 6061-T6 aluminum with a hard black anodized finish, they adjust with an easy to reach threaded adjuster.

Maintain factory ride with SPC x Axis sealed flex joints which eliminate binding and bushing compliance. 

When you install these links on the front, you will be able to adjust caster to 1.25”. SPC has maintained the OE form so that you will be able to reuse your factory air deflector without modification. 

When you install these arms on the rear you will be able to adjust set-back 1/2 inch (13mm). 

Designed for street use as well as the rigors of the track, these arms will let you set your alignment angles as you wish. 

For camber adjustment, consider SPC's adjustable camber arms, PN# 72610. These SPC arms are designed to work together to make your suspension fully adjustable. 


MBRP 12-21 Ferrari 812SF 812GTS F12 6.3L 6.5L V12 70mm X-Pipe Kit T304 Stainless Steel MBRPS3900304

 

MBRP 12-21 Ferrari 812SF 812GTS F12 6.3L 6.5L V12 70mm X-Pipe Kit T304 Stainless Steel MBRPS3900304

MBRP 12-21 Ferrari 812SF 812GTS F12 6.3L 6.5L V12 70mm X-Pipe Kit T304 Stainless Steel MBRPS3900304

MBRP 12-21 Ferrari 812SF 812GTS F12 6.3L 6.5L V12 70mm X-Pipe Kit T304 Stainless Steel MBRPS3900304


Features:

  • 2012-2021 Ferrari 812SF/ 812GTS F12 6.3L/6.5L V12 70mm X-Pipe Kit T304 Stainless Steel
  • Smooth Mandrel Bent Tubing
  • Durable T304 Stainless Steel
  • Bolt-on Installation
  • Moderate Exhaust Tone
  • X-Pipe

MBRP Pro Series is the best performance exhaust system that money can buy. 

It is a series designed and built for the serious enthusiast who will settle for nothing less. 

Constructed from T304 stainless steel and will deliver your car’s optimal durability at its best.

Easy to clean and maintain this is the product of choice for owners of lifted vehicles operated in severe environments.


TANABE GT FUNTORIDE SPRING FOR HONDA CIVIC FL1 FK7FK

 

TANABE GT FUNTORIDE SPRING FOR HONDA CIVIC FL1 FK7FK

TANABE GT FUNTORIDE SPRING FOR HONDA CIVIC FL1 FK7FK

TANABE made springs with precise dimensions, excessive testings and checking prior to come out with an exceptional springs. 

By repeating trial production and running tests over and over again until a satisfactory spring is completed, TANABE thoroughly pursue the characteristics of a sports car, leading to attractive products. 

In addition, by setting the handling to be supple and sharp, TANABE had realized the flexibility to supple the gap on the road surface and the sharpness of handling that can trace the target line when turning. 

Front: 20-30mm Down.
Back: 20-30mm Down. 
Rate: F: 3.1K, R: 3.3K


GRUPPEM RAM AIR SYSTEM FOR FERRARI F355 F355 FRI-0154

 

GRUPPEM RAM AIR SYSTEM FOR FERRARI F355 F355 FRI-0154

GRUPPEM RAM AIR SYSTEM FOR FERRARI F355 F355 FRI-0154

Manufacturer: GruppeM 
Brand: GroupM GruppeM 
Displacement: 3.5 LITER 
Grade / Specifications: M5.2

1. The specially designed carbon duct has been developed to completely block the hot air in the engine room. 

2. Fresh air is directly introduced to lower and stabilize the intake air temperature. 

3. Achieves torque and power-up in the entire range from low to high revs. 

4. You can also enjoy the sporty intake sound from excellence engineering works by GRUPPEM.

5. Installation is bolt-on with a dedicated fitting adapter. 



ALPHA Performance R35 GT-R Dual Pass Radiator Upgrade ALP.07.02.0005-1

 

ALPHA Performance R35 GT-R Dual Pass Radiator Upgrade ALP.07.02.0005-1

ALPHA Performance R35 GT-R Dual Pass Radiator Upgrade ALP.07.02.0005-1


1. This Griffin made, dual pass, all-aluminum radiator is the perfect replacement for your factory Nissan R35 GT-R radiator. 

2. The dual pass design increases the fluid velocity through the core which promotes greater heat transfer. 

3. The Alpha radiator uses all the OEM mounting hardware and has provisions to mount the A/C condenser in the factory location. 

4. This is a perfect high performance dual pass radiator upgrade for your factory R35 GT-R radiator.

Clutch Masters Clutch Kit for Subaru WRX '15+

 

Clutch Masters Clutch Kit for Subaru WRX '15+

Clutch Masters Clutch Kit for Subaru WRX '15+


Clutch Masters has introduced their new FX-series performance clutch kits and flywheel for the 2015 Subaru WRX with the 2.0L engine and 6 speed transmission. 

The new FX-series kits feature a High Leverage pressure plate, performance disc, Release bearing with clutch fork and alignment tool. 

Light weight single-mass aluminum and steel flywheels sold separately. 

Kits include the following: High-Leverage Pressure Plate Performance Disc Release Bearing with Fork Alignment Tool 

High-Leverage Pressure Plate The Clutch Masters High-Leverage pressure plate provides an increase in clamping force while still maintaining a soft pedal feel. The High-Leverage design reduces the amount of load against the crankshaft, minimizing thrust bearing wear and crank walk. 

Performance Disc The Clutch Masters performance disc utilizes a high dampening 4 spring carrier to reduce the amount of shock and impact during engagement. 


ISR Performance Mazda Miata NB Circuit Spec Exhaust-(1999-2005) IS-CSEXH-NB

 

ISR Performance Mazda Miata NB Circuit Spec Exhaust-(1999-2005) IS-CSEXH-NB

ISR Performance Mazda Miata NB Circuit Spec Exhaust-(1999-2005) IS-CSEXH-NB


1. This Miata performance exhaust supports maximum driving momentum in two ways:
a) supports powerful, efficient combustion by quickly extract out fumes from the exhaust manifold. 
b) the exhaust configuration is 18 pounds less than the vehicle’s stock exhaust. 

2. This is a 2 piece Mazda Miata performance exhaust features a front pipe and a mid pipe that mount to the header and showcase an integrated muffler. 

3. The front pipe is 2.5'' and features brushed stainless steel construction. 

4. The rear pipe has a polished, stainless steel muffler that’s accented with a 4'' tip. 


ISR Performance Mazda Miata NB Circuit Spec Exhaust-(1999-2005) IS-CSEXH-NB






Friday, December 8, 2023

TODA RACING VTEC KILLER HIGH POWER PROFILE CAMSHAFT FOR CIVIC TYPER INTEGRA TYPER ACCORD EUROR K20A 14121-K20-111

 

TODA RACING VTEC KILLER HIGH POWER PROFILE CAMSHAFT FOR CIVIC TYPER INTEGRA TYPER ACCORD EUROR K20A 14121-K20-111

TODA RACING VTEC KILLER HIGH POWER PROFILE CAMSHAFT FOR CIVIC TYPER INTEGRA TYPER ACCORD EUROR K20A 14121-K20-111

1. Disabling the VTEC system will remove fluctuations in oil pressure system and secure a reliable oil feed to all the main moving components.

2. Angle (valve lift): 290(12.5)
Type: EX

3. Standard valve spring cannot be used.

4. TODA Up Rated Valve Spring required.

5. TODA Cam Sprockets required.

6. When installing, please confirm that there is enough valve to piston clearance, valve to valve clearance, cam lobe to follower clearance on VTC operation.

7. Programmable ECU with tunable VTC required. Customers discretion required on selecting an ECU.

8. Caution: The exhaust finger follower (roller rocker-arm) may need modifying, due to contact with the cam lobe.


Xforce Ford Mustang GT 2018 (Coupe) Twin 3" Stainless Steel Cat-Back Exhaust System With Oval Varex Mufflers/Quad Tips ES-FM18-VMK-CBS

 

Xforce Ford Mustang GT 2018 (Coupe) Twin 3" Stainless Steel Cat-Back Exhaust System With Oval Varex Mufflers/Quad Tips ES-FM18-VMK-CBS

Xforce Ford Mustang GT 2018 (Coupe) Twin 3" Stainless Steel Cat-Back Exhaust System With Oval Varex Mufflers/Quad Tips ES-FM18-VMK-CBS


1. Countless hours of development time in Xforce Australian R&D center have been spent to carefully craft the ultimate sound from the latest Coyote engine for Ford Mustang GT 2018. 

2. Smartbox for the ultimate in control using Xforce patented Bluetooth smartphone app to provide pre-set automatic valve control, geo fencing and more.

3. The Ford Mustang GT 2018 Cat-Back Exhaust System was built with 304 Stainless steel, TIG Welded.

4. Two center section options included in every kit, 1) resonated 2) straight pipe.

5. Patented and proven Varex Valved rear mufflers.

6. Quad 4” Polished Stainless Steel tips

7. All Gaskets, Nuts & Bolts included for fitment.

8. Part No: ES-FM18-VMK-CBS

9. Vehicle Model: MUSTANG

10. Diameter [in]: 3"Material: 304 Stainless Steel


APR Carbon Fiber Intake - 1.8T/2.0T EA888 Gen 3 MQB CI100033

 

APR Carbon Fiber Intake - 1.8T/2.0T EA888 Gen 3 MQB CI100033

APR Carbon Fiber Intake - 1.8T/2.0T EA888 Gen 3 MQB CI100033


FEATURES:
  • Increased horsepower and torque
  • Better throttle response
  • Enhanced engine sound
  • Closed carbon fiber system
  • All mounting hardware included
  • Pleated cotton gauze filter
  • Directional turning vanes for proper filter loading

Please note, fitment excludes 2.0T Gen 3 B-Cycle engines with a MAF sensor on the intake pipe. 

The TT and TTS require an inlet adapter (CI100033-C). 

Models with Secondary Air Injection (SAI) require a breather filter (CI100020-A).