APR Performance Rear Diffuser Under Tray Only for Chevrolet C7 Corvette 2014-2019 aprAB-277018

1. Diffusers work in conjunction with other aerodynamic components of a car to help produce downforce. 

2. Because a car displaces air as it moves forward, the air molecules in the rear of the car get disrupted causing a vacuum of low pressure air. 

3. To help channel the high speed air flow coming from underneath the car, diffusers redirects the high speed air flow to smoothly transition into the low pressure vacuum in the rear for performance improvement.

4. This encourages a smoother flowing air flow underneath the car and allows better performance from other aerodynamic components such as aerodynamic wings.

6. Fits Both C7 Stingray and C7 Z06, under Tray Only.

APR Performance Rear Diffuser Under Tray Only for Chevrolet C7 Corvette 2014-2019 aprAB-277018

SEEKER SES MUFFLER KIT FOR HONDA CIVIC EK4 EK9 11600-EK9-000

 

SEEKER SES MUFFLER KIT FOR HONDA CIVIC EK4 EK9 11600-EK9-000

■ SES muffler KIT For EK4 / EK9 ■ 

- Layout: Single right out, catalyst rear replacement type (intermediate pipe & tail silencer SET product) 
- Main pipe 60Φ Finisher outer diameter 72Φ (Finisher inner diameter 67Φ) 
- Material: Stainless steel (Blue-baked titanium wrapped around the finisher) 
- Volume: Proximity noise 94dB (In-house measurement value)

“High power and high durability" 
In addition to improving response in the entire range, SEEKER had realized torque characteristics that pursue ease of handling. 

"Layout considering town use" 
Since the layout is designed to secure the minimum ground clearance as much as possible, it is possible to lower down further within the range of vehicle inspection. 

"Sound Tuning" 
As a result of tuning the volume and sound quality with the theme of not being toohogh and not too quiet, SEEKER had realized an exquisite sound that is elegant and dynamic. 

"Design" 
After repeated trial and error, the shape of the main silencer and finisher, which are the main looks, has been finished in the shape that we at SEEKER think is the best. 
Furthermore, the finisher is wrapped with blue-printed titanium material, and sandblasted S.A. E. I got the S logo. It is a proof of SEEKER exhaust. 

SEEKER SES MUFFLER KIT FOR HONDA CIVIC EK4 EK9 11600-EK9-000

 

APR Performance Aerodynamic Kit for Toyota GR86 Subaru BRZ '22+ AB-522000

The aerodynamic kit for the Toyota GR86 combines all the best aerodynamic upgrades into a single package. 

This package is designed to improve high-speed handling, both on and off the track.

This Aerodynamic Kit Includes:

• Front Air Dam
• Side Rocker Extensions
• Rear Bumper Skirts

APR Performance Aerodynamic Kit for Toyota GR86 Subaru BRZ '22+ AB-522000

J'S RACING TITANIUM PENETRATION NUT 17HEX 5 HOLE PACK TNW-01-5H

 

J'S RACING TITANIUM PENETRATION NUT 17HEX 5 HOLE PACK TNW-01-5H

20 pieces (for one 5H wheel) 
64 titanium alloy (Ti6AI-4V) 
Penetration type 
M12 x P1.5 17HEX 
Length: 35mm 
● J'S RACING logo engraved.

1. Material: 64 Titanium Alloy (Ti6AI-4V) 

2. A penetrating wheel nut using the high-grade material 64 Titanium Alloy (Ti6AI-4V). 

3. Achieves weight reduction by thinning, which enables ultra-high strength of titanium material. 

4. It has excellent heat resistance and little expansion, making it ideal for circuit driving. 

5. Brilliant color development by quenching peculiar to titanium and J'S RACING logo create a sense of luxury 

J'S RACING TITANIUM PENETRATION NUT 17HEX 5 HOLE PACK TNW-01-5H

M&M HONDA CIRCUIT STRAIGHT EX PIPE TITANIUM FOR CIVIC FD2 MUGEN RR 00300-FD2-M002

 

M&M HONDA CIRCUIT STRAIGHT EX PIPE TITANIUM FOR CIVIC FD2 MUGEN RR 00300-FD2-M002

1. This M&M Honda Circuit Straight EX Pipe Titanium for CIVIC FD2 MUGEN RR will improve horsepower, eliminate power loss and improve exhaust efficiency for an optimum circuit driving.

2. The M&M EX straight titanium pipe is manufactured for circuit driving. 

3. The 60 mm diameter straight pipe made by Titanium is equipped with an O2 sensor and LAF sensor mounting port and can be mounted by bolt-on. A custom-made air-fuel consumption meter mounting adapter can also be set. 

4. Comes with a gasket and mounting bolts. Parts for competitions and circuits. It cannot be used on public roads. 

5. You can also set the air-fuel ratio mounting adapter.

M&M HONDA CIRCUIT STRAIGHT EX PIPE TITANIUM FOR CIVIC FD2 MUGEN RR 00300-FD2-M002

TODA RACING FREE ADJUSTING CAM PULLEY FOR CIVIC CR-X INTEGRA B16A B16B B18C 14211-B16-001

 

TODA RACING FREE ADJUSTING CAM PULLEY FOR CIVIC CR-X INTEGRA B16A B16B B18C 14211-B16-001

1. Adjustable cam pulley is a cam pulley with the same location as original BUT is adjustable.

2. You can either adjust it into advance or retard. 

3. Advance adjustment is for low-end while retard adjustment is for high-end.

4. Features:

- Use duralumin A-7075 for all sections.
- The adjustment can be carried out to 1 deg of the crank angle.
- Adjustment can be done with a vernier degree scale.
- Type: IN/EX (common)

TODA RACING FREE ADJUSTING CAM PULLEY FOR CIVIC CR-X INTEGRA B16A B16B B18C 14211-B16-001

 

Spec-D LED TAIL LIGHTS-RED SMOKE for BMW E90 06-08 LT-E9005RGLED-TM

Vehicle Fitment:
2005-2008 BMW E90 3-Series 4DR Sedan models only

Brand new in original box

Comes with 1 pair of chrome housing red/smoke lens tail lights w/ LED strips

All LED wiring for the tail lights are pre-assembled for the essential plug & play application

Equipped with 921 reverse light bulbs

Made by an ISO certified manufacturer using materials that meet strict OEM requirements

Professional installation is highly recommended

Spec-D LED TAIL LIGHTS-RED SMOKE for BMW E90 06-08 LT-E9005RGLED-TM

 

aFe MACH Force-Xp Cat-Back Exhaust System for Volkswagen GTI (MKVI) 10-14 L4-2.0L (t) afe49-46405

1. This Mach Force XP cat-back exhaust system produced 10 horsepower and 9 lbs. x ft. of torque. 

2. This Mach Force XP is constructed from mandrel bent, 2.50" stainless steel and includes MIG welded hangers. Follow OE style band clamps for a simple, leak-free bolt-on installation. 

3. A 2.50" high flow resonator is used to keep exhaust drone to a minimum while maintaining a sporty sound. 

4. aFe Mach Force XP use 3.5" double wall, angle cut, polished, stainless steel dual tips with an aFe laser etched logo that gives an aggressive and sporty look.

aFe MACH Force-Xp Cat-Back Exhaust System for Volkswagen GTI (MKVI) 10-14 L4-2.0L (t) afe49-46405

J'S RACING 3D GT-WING DRY CARBON TYPE1 FOR HONDA INTEGRA DC2 B18C DGW1-T2-D

 

J'S RACING 3D GT-WING DRY CARBON TYPE1 FOR HONDA INTEGRA DC2 B18C DGW1-T2-D

1. There are 4 levels of adjustment range and it demonstrates a wide range of potential from low speed to high speed circuits and streets. 

2. The 1500mm single flap for outdoor storage vehicles or those who use it for a long time with 
UV cut clear coating is recommended to prevent UV burning.

3. Material: 

Wing tip plate, wing body, stay mount DRY carbon. GT-WING with 3D shape, which is standard in motor sports such as GT, tuning car and time attack. 

4. The upper surface is banana-shaped in order to increase the wing area while suppressing the overall width. 

5. A complex three-dimensional wing cross section is used to capture the airflow from the roof and reduce air resistance. 

6. Efficiently generates downforce while reducing drag and increase cornering speed in high-speed corners. 

J'S RACING 3D GT-WING DRY CARBON TYPE1 FOR HONDA INTEGRA DC2 B18C DGW1-T2-D

 

PRL Motorsports P700 Drop-In Turbocharger Upgrade For Civic Accord Acura PRL-HCR-TK-P700

The PRL Motorsports P700 Drop-In Turbocharger Upgrade is the quickest and fastest drop-in turbocharger for Honda / Acura/ Accord 2.0L Turbo platforms offers 600+ horsepower capabilities.

Fitments:

Fits all 2017-2021 Honda Civic Type-R FK8
Fits all 2023+ Honda Civic Type-R FL5
Fits all 2018+ Honda Accord 2.0T
Fits all 2019+ Acura RDX 2.0T
Fits all 2021+ Acura TLX 2.0T
Fits all variant models including RHD, 10AT, 6MT, International Models, Etc.

Turbocharger Specs:
• Cast 304 Stainless Steel, Dual Ceramic Ball Bearing CHRA
• Cast Aluminum, Stock Location Compressor Housing w/ Anti-Surge Inlet
• Cast 304 Stainless Steel Turbine Housing w/ Integrated o2 Sensor Bung for Compatibility w/ Accord, RDX & TLX
• High Efficiency Point-Milled 9-Blade Billet 7075 Aluminum Compressor Wheel (58mm Inducer, 71mm Exducer)
• High Efficiency Inconel 713C 9-Blade Turbine Wheel (54mm Inducer, 49mm Exducer)
• Increased Wastegate Diameter
Kit Includes:
• P700 Turbocharger Assembly
• Premium Mounting Hardware & Gasket Kit
• Oil Feed Filter/O-Ring Assembly
• Oil Feed Crush Washers

Important Notes: 
• REQUIRES ECU CALIBRATION (BASEMAP FOR FK8 CIVIC TYPE-R AVAILABLE IN HONDATA SOFTWARE)

• 100% DROP-IN, FACTORY LOCATION TURBO CHARGER UPGRADE FOR 2017-2021 HONDA CIVIC TYPE-R (RETAINS FACTORY HEAT SHIELDS)

• FEATURES INTEGRATED O2 BUNG IN THE TURBINE HOUSING FOR ACCORD, TLX & RDX (NO AFTERMARKET DOWNPIPE REQUIRED FOR INSTALLATION)

• ACCORD, TLX & RDX REQUIRE THE FOLLOWING PARTS:
o TURBOCHARGER WATER PIPE A
o FK8 CIVIC TYPE-R ELECTRONIC WASTEGATE ACTUATOR ARM
o FACTORY FK8 CIVIC TYPE-R TURBOCHARGER MOUNTING BRACKET

Install Notes:
Please make sure (both) supplied copper crush washers are installed correctly (one on top and one on bottom of banjo fitting, sandwiched by banjo bolt. Factory banjo bolt torque spec is 35 nm or 25.86 ft/lbs.

Technical Notes:
1. The PRL Motorsports P700 Drop-In Turbocharger Upgrade is the quickest and fastest drop-in turbocharger for Honda / Acura 2.0L Turbo platforms offers 600+ horsepower capabilities for Honda's 2.0L Turbo K20C Engines without sacrificing spool. 

2. A billet 304 stainless steel, dual ceramic ball bearing CHRA was implemented for reduced weight and improved durability. 

3. Factory oil and coolant lines are retained, as well as the factory bypass valve and wastegate actuator. 

4. Increased cooling capacity has been provided by the CHRA's larger water jacket.

5. PRL High Efficiency compressor wheel is significantly taller than most billet compressor wheel upgrades and features the latest technology in aerodynamics (tapered tip exducer, cutback design on blade top edge) for optimal spool and power. 

6. A larger compressor wheel diameter in comparison to PRL P600 turbocharger allows for drastically decreased shaft speeds. 

7. This High Efficiency Turbine Wheel also features the latest technology in aerodynamics for optimal spool and power. 

8. A larger wastegate actuator bore also lowers backpressure.The P700 features an integrated oxygen sensor bung in its turbine housing for 2.0T Accord, TLX and RDX customers, which means customers do not need to purchase FK8 Civic Type-R-style downpipe for installation, unlike other drop-in turbocharger upgrades on the market.

Note: 

Movement of the primary oxygen sensor (between the exhaust housing and the downpipe) changes the report of the sensor to the ECU due to exhaust pressure differences. It is critical important to retain factory location for engine performance and safety.

PRL Motorsports P700 Drop-In Turbocharger Upgrade For Civic Accord Acura PRL-HCR-TK-P700

ARMYTRIX Stainless Steel Valvetronic Catback Exhaust System Quad Carbon Tips Volkswagen Golf R MK7.5 2016-2019 VW7R2-QC38

 

ARMYTRIX Stainless Steel Valvetronic Catback Exhaust System Quad Carbon Tips Volkswagen Golf R MK7.5 2016-2019 VW7R2-QC38

Features:

• Power ( HP): 15.7
• Torque ( Nm): 20.9
• Weight Saving (-Kg): 4.4
• Stainless Steel Valvetronic Mufflers
• Stainless Steel Race Downpipe
• Quad Carbon Tips 4x89mm

Fitment:

• Volkswagen Golf R MK7.5 2016-2019

1. The ARMYTRIX SS Valvetronic Catback Exhaust System Quad Carbon Tips for VW Golf R MK7.5 was engineered with unrestrictive pathway to maximize exhaust flow for more blazing power and fortifying audio. 

2. The valvetronic system introduces a new dimension of versatility; never compromise between sound and stealth. 

3. The ARMYTRIX exclusive OBDII dongle system reduces the installation time by 50%.

4. ARMYTRIX system for VW Golf R MK7.5 is lighter, ridded of the OE deadweight and offers an unrestrictive flow for greater horsepower and torque improvement.

ARMYTRIX Stainless Steel Valvetronic Catback Exhaust System Quad Carbon Tips Volkswagen Golf R MK7.5 2016-2019 VW7R2-QC38

 

SPL Titanium Rear Toe Links for Nissan R35 GT-R SPL RTA R35

SPL Adjustable Rear Toe Arms Feature:

• Lightweight aluminum, titanium, and chromoly construction

• Electroless nickel plated 4130 double adjuster for quick adjustment

• 6061 Aluminum Rotating clamp design allows for easy access to lock down your alignment settings

• Computer Aided Design with Finite Element Analysis

• Blue anodized titanium socket head cap screws

• Low friction Teflon lined rod ends

• Black anodized for a durable finish

• Made in the USA

1. The SPL TITANIUM Series rear toe links allow for an increased range of rear toe adjustment, necessary for lowered street cars and performance alignments for racing.

2. Using FEA (Finite Element Analysis) SPL CNC milled 6061 billet aluminum arms are designed to exceed factory strength and durability. 

3. SPL's exclusive double adjuster is comprised of electroless nickel plated 4130 chromoly along with 6061 aluminum clamps to reduce weight and prohibit corrosion while offering quick and easy adjustment.  

4. Blue anodized titanium hardware shaves even more unsprung weight from the arms, without compromising strength. 

5. SPL next generation NCT motorsports bearing feature a carbon fiber teflon liner to provide quiet operation, lower friction, smoother articulation and eliminates bushing deflection under load.  

6. The injection-moulded slot-loaded liner is self-lubricating and self-cleaning, offering a robust reliability for street and track use.

7. The combination of SPL TITANIUM rear camber links and SPL eccentric lockout kit will give a total rear camber and toe alignment with "zero-slip".

8. Sold as a pair and made in the USA.

SPL Titanium Rear Toe Links for Nissan R35 GT-R SPL RTA R35

 

Verus Engineering Aggressive Styled Rear Diffuser - FT86 A0012A

The Aggressive Rear Diffuser was designed for function and form; specifically with an aggressive strake design to really make the diffuser stand out from others.

WHAT IS INCLUDED
• Rear Diffuser
• Associated Brackets
• Hardware Kit, Including All Necessary Pieces for a Seamless Install
FEATURES
• Reduce Drag
• Reduce Lift (Increase Downforce)
• Improved Overall Aerodynamic Efficiency (Increase L/D)
• Increase Tire Grip at Speed
• Simple, Non-Invasive Bolt-on Design

SPECIFICATIONS
• CFD Optimized Design
• 5052-H32 Sheet Aluminum Composition
• CNC Laser Cut
• CNC Press Brake Bent
• Powder-coated Low Gloss Textured Black
• Stainless Hardware Throughout
• Unique Strake-to-Mainplane Construction (No rivet heads)
• Made in the U.S.A.

1. The Verus Engineering Aggressive Rear Diffuser combines function, form and science to deliver unparalleled fit, performance and style for your GT86, FRS, or BRZ.

2. Utilizing state-of-the-art analysis software during the R&D process, Verus had extracted more performance for the given build volume; increasing downforce generated and reduce drag. 

3. During the design process; Verus utilized OEM CAD data. This resulted in a product that features a near OEM fit and finish.

Verus Engineering Aggressive Styled Rear Diffuser - FT86 A0012A

 

AEM Cat Back Exhaust for Honda CRZ aem600-0200

1. AEM Cat Back Exhaust systems provide high performance and power with a sporty sound. 

2. The AEM Cat Back Exhaust design is to enhance the use of aftermarket air intake systems to the optimum.

3. The AEM air intake systems are designed to perform better and longer for the benefit of your car. 

4. Natural as it be, AEM system's exhaust tips has an OEM look and quality. 

5. AEM Cat Back Exhausts will maintain clearances to critical systems and use OEM routing paths, providing a high performance exhaust with OEM fit and finish.

AEM Cat Back Exhaust for Honda CRZ aem600-0200

 

Duraflex 1M Look Front Bumper for BMW M3 2008-2013 EXD109302

1. 2008-2013 BMW M3 E90 E92 E93 Duraflex 1M Look Front Bumper Cover - 1 Piece

2. Item 100% must be installed by a professional body shop with experience fitting aftermarket body panels.

3. Some modification/adjustment/final fit must be performed for proper fitment. 

4. No returns or refunds.

Duraflex 1M Look Front Bumper for BMW M3 2008-2013 EXD109302