NISMO FUEL PUMP FOR NISSAN SKYLINE GT-R R33 RB26DETT 17042-RR596

 

NISMO FUEL PUMP FOR NISSAN SKYLINE GT-R R33 RB26DETT 17042-RR596

1. This NISMO Fuel Pump will deliver 4.6L/min (at p=294kPa 3.0kgf/cm2) 

2. It is a solid 125% increase in fuel delivery system as demanded by RB26DETT performance characteristic.

3. The Harness, Connector, Strainer and O-Ring are included as upgraded gears in comparison to the stock.

NISMO FUEL PUMP FOR NISSAN SKYLINE GT-R R33 RB26DETT 17042-RR596

MAXIM WORKS EXHAUST MANIFOLD FOR SUBARU IMPREZA GDB 1100FE056

 

MAXIM WORKS EXHAUST MANIFOLD FOR SUBARU IMPREZA GDB 1100FE056

Engine model EJ207 Pipe diameter: Primary φ38.1 Pipe diameter: Second collector (φ38.1) Pipe diameter: Tail φ50.8

A/B type allowed (GDB), not allowed after November 2002

MAXIM WORKS EXHAUST MANIFOLD FOR SUBARU IMPREZA GDB 1100FE056

VARIS MAGNUM OPUS FRONT SPOILER CARBON FOR LEXUS LC USC10 VALE-009C

 

VARIS MAGNUM OPUS FRONT SPOILER CARBON FOR LEXUS LC USC10 VALE-009C

Product number: VALE-009C

Compatible car: LEXUS LC USC10

Product description: Original VARIS wide body aero parts.

Remark: Exclusive for circuits

1. Built twill weave carbon fiber, this front spoiler is a part of the Magnum Opus bodykit designed by Varis for perfection.

2. This awesome bodykit dramatically restyles the LC, enhancing its sporting character while retaining that distinctly ‘Lexus’ sense of refinement.

3. Truly a great choice to enhance an aggressive and sporty outlook for your LEXUS LC matching it undeniable performance thus far.

VARIS MAGNUM OPUS FRONT SPOILER CARBON FOR LEXUS LC USC10 VALE-009C

LAILE BEATRUSH AIR INTAKE DUCT FOR TOYOTA 86 ZN6 SUBARU BRZ ZC6 S96400AD

 

LAILE BEATRUSH AIR INTAKE DUCT FOR TOYOTA 86 ZN6 SUBARU BRZ ZC6 S96400AD

1. This LAILE BEATRUSH intake duct efficiently leads fresh air flowing from the front under grill during traveling to the cleaner box. 

2. During high speed driving, a lot of air flow enters the front bumper and may not pass through the radiator and disperse randomly inside the bumper. 

3. In order to efficiently funnel the accumulated air, LAILE BEATRUSH set the opening of the intake duct to face downward. 

4. The intake resistance was reduced by making the opening area larger than usual.

5. Installation can be done using the same parts as genuine intake duct.

6. Specifications: 
Material: FRP
Weight: 0.7 kg
Installation: Bolt on

LAILE BEATRUSH AIR INTAKE DUCT FOR TOYOTA 86 ZN6 SUBARU BRZ ZC6 S96400AD

GRUPPEM RAM AIR SYSTEM FOR HONDA CIVIC FD2 TYPE R FR-0510

 

GRUPPEM RAM AIR SYSTEM FOR HONDA CIVIC FD2 TYPE R FR-0510

Compatible Engine: K20A

1. The specially designed carbon duct has been developed to completely block the hot air in the engine room.

2. Fresh air is directly introduced to lower down and stabilize the intake air temperature. 

3. Fresh and colder air with more oxygen content will improve combustion significantly.

4. Achieves excellence torque and power-up in the entire range from low to high revs. 

5. You may enjoy the sporty intake sound from this GRUPPEM Ram Air System. 

6. Installation is bolt-on with a dedicated fitting adapter. 

Manufacturer: GruppeM 
Brand: M 
Displacement: 2.0 LITER 
Grade / Specifications: NA

GRUPPEM RAM AIR SYSTEM FOR HONDA CIVIC FD2 TYPE R FR-0510

 

Corsa 2014-2019 Chevrolet Corvette C7 Z06 6.2L 2.75in Xtreme Axle-Back w Dual NPP cor14777

1. CORSA's Patented Reflective Sound Cancellation(R) (RSC) Technology allows acoustic engineers to create a drone free exhaust sound, styled specifically to fit the personality of your vehicle. 

2. Each system is designed to increase vehicle performance, deliver an AGGRESSIVE SOUND under acceleration and a DRONE-FREE EXPERIENCE during cruise. 

3. CORSA's innovative Valved Exhaust System allows drivers to customize their driving experience using Dual-Mode NPP. 

4. Performance gains are not affected by sound choice.

Corsa 2014-2019 Chevrolet Corvette C7 Z06 6.2L 2.75in Xtreme Axle-Back w Dual NPP cor14777

GRUPPEM RAM AIR SYSTEM FOR BMW 3 SERIES 8A20 FRI-0340

 

GRUPPEM RAM AIR SYSTEM FOR BMW 3 SERIES 8A20 FRI-0340

1. Compatible Engine: B48B20B

2. The specially designed carbon duct has been developed to completely block the hot air in the engine room. 

3. Fresh air is directly introduced to lower and stabilize the intake air temperature. Achieves torque and power-up in the entire range from low to high revs. 

4. You can also enjoy the sporty intake sound. 

5. Installation is bolt-on with a dedicated fitting adapter. 

Manufacturer: GruppeM 
Brand: GroupM GruppeM 
Code: F30 / 31/34 LCI 
Displacement: 2.0 LITER 
Grade / Specifications: 330I TURBO 252PS

GRUPPEM RAM AIR SYSTEM FOR BMW 3 SERIES 8A20 FRI-0340

HKS CRANK DAMPER PULLEY FOR GT-R R35 VR38DETT 24998-AN001

 

HKS CRANK DAMPER PULLEY FOR GT-R R35 VR38DETT 24998-AN001

1. Crank Damper Pulley Capacity Upgrade Kit from HKS for Nissan VR38DETT 4.3L reduces the torsion of the crankshaft.

2. It reduces the peak value of the torsion of the crankshaft that occurred from the sympathetic vibration point.

NOTE:

** Damper pulley commonly known as crankshaft pulley is a pulley mounted at the front end of the crankshaft.

**It drives the other belts that will drive the alternator, air conditioning compressor, power steering pump, water pump etc.

HKS CRANK DAMPER PULLEY FOR GT-R R35 VR38DETT 24998-AN001

REVOLUTION FINAL GEAR SET 4.8 FOR TOYOTA 86 SUBARU BRZ ZN6 ZC6 RZN6-F48

 

REVOLUTION FINAL GEAR SET 4.8 FOR TOYOTA 86 SUBARU BRZ ZN6 ZC6 RZN6-F48

1. This is a 4.875 final gear set that can be installed by bolt-on. 

2. The replacement parts required for installation are also included, so you can install it as is. 

3. Compatible with 86 & BRZ (ZN6/ZC6) 

4. This final gear set from REVOLUTION is perfect for circuit racing & street, autocross, drag racing, or any track day event. 

5. By keeping the rev at the optimum range, the enhanced acceleration and the throttle response will definitely produce a better lapping time. 

6. For further improvements this item can also be used in conjunction with the cross gear kit

Note:

A. Final Drive gear for the Subaru BRZ & Scion FRS come in 4.43 or 4.68 final ratio which is suitable for users who plan to keep their Subaru BRZ / Scion FRS naturally aspirated. 

B. The higher the final gear ratio over stock will increase the wheel torque across all RPM range.

REVOLUTION FINAL GEAR SET 4.8 FOR TOYOTA 86 SUBARU BRZ ZN6 ZC6 RZN6-F48

IKEYA FORMULA REAR CAMBER ADJUSTER UPPER ARM FOR TOYOTA SUPRA JZA80 IFAG11003

 

IKEYA FORMULA REAR CAMBER ADJUSTER UPPER ARM FOR TOYOTA SUPRA JZA80 IFAG11003

Rear Camber Adjuster Upper Arm improves traction performance by adjusting the camber angle that is excessively attached to the original arm due to vehicle height changes, etc.

By increasing the rigidity of each part of the arm and adopting a patented "misalignment prevention mechanism", IKEYA had achieved both "accuracy in setup" and "durability for long-term use with peace of mind". 

*Adjustment range ±10mm

IKEYA FORMULA REAR CAMBER ADJUSTER UPPER ARM FOR TOYOTA SUPRA JZA80 IFAG11003

 

Vargas Turbo VTT BMW S55 / N55 Crank Bolt Capture VTT-S55-CBC

1. In few high performance driving scenarios you may feel worry about your  BMW  S55 / N55 crank hub spinning.

2. All the reports and news about spun hubs will make you nervous about turning up the power from your powerful N55 engine/ BMW S55.

3. To unleash true potential from N55 powerful engine without any little extra security for you crank bolt indeed a bad idea.

4. Simple yet brilliant engineering solution may prevent you from having 24 bent valves out of exhilarating N55 power. 

5. This is an easy and cost-effective way to do prevent that, by having the VTT BMW S55/ N55 crank bolt capture.

6. The VTT BMW S55/ N55 crank bolt capture will slips over the head of the crank bolt to fully encapsulating it and locks it to the crank hub.

7. This means the crank bolts cannot back out no matter what. A great security measure to note.

8. The VTT-CBC crank bolt capture is 100% Billet Aircraft Grade Aluminum, anodized black to protect it from the elements and give it a stealth look. 

9. While this is not a full fix for all crank hub spinning issues, Vargas Turbo noticed that most issues have stemmed from the bolt itself backing out and this is a great way to keep that from happening. 

10. Extremely lightweight at only 1.3 Oz's. It adds virtually no weight to the crank which is important for balance and vibration. 

11. The VTT crank bolt capture are designed to be used with factory crank bolts only. Will not work with aftermarket bolts.

Vargas Turbo VTT BMW S55 / N55 Crank Bolt Capture VTT-S55-CBC

STI TRAILING LINK SET FOR SUBARU BRZ (ZC) ST20250AS000

 

STI TRAILING LINK SET FOR SUBARU BRZ (ZC) ST20250AS000

1. The rear link mechanism will operate better with the replacement of rubber bushings with pillow balls. 

2. This not only improves road gripping performance during cornering, but also effectively transmits traction to the road surface when the accelerator is depressed due to the increased rigidity. 

3. Combination with a lateral link (ST20250ZR000) -already commercially available, this STI trailing link will gives Subaru BRZ ZC a more linear suspension characteristics.

 * Pillow ball bushing (2 x 1 location), press-fitted

STI TRAILING LINK SET FOR SUBARU BRZ (ZC) ST20250AS000

FIRST MOLDING AERO BONNET CARBON FOR HONDA CIVIC EK9 KOUKI FIRST-MOLDING-00001

 

FIRST MOLDING AERO BONNET CARBON FOR HONDA CIVIC EK9 KOUKI FIRST-MOLDING-00001

1. Brand: First Moulding

2. Series name: Aero Bonnet Carbon

3. Product number: First Moulding-00001

4. Compatible car: HONDA CIVIC EK9 KOUKI

5. Product description: Full Carbon Bonnet

FIRST MOLDING AERO BONNET CARBON FOR HONDA CIVIC EK9 KOUKI FIRST-MOLDING-00001

HKS SUPER SQV4 FOR NISSAN GT-R R35 VR38DETT 71008-AN027

 

HKS SUPER SQV4 FOR NISSAN GT-R R35 VR38DETT 71008-AN027

1. Compatible car: Nissan GT-R R35

2. Compatible engine: VR38DETT 

3. Model year: 07/12 ~

4. Stock rubber hoses and cast pipes will be replaced with the polished aluminum SQV pipes that have smooth shape. 

5. High frequency blow-off sound is realized due to replacement with attached fins, although the default blow off valve layout returns to suction pipes.

6. The HKS SUPER SQV4 for GT-R R35 will avoid engine stall problem effectively.

HKS SUPER SQV4 FOR NISSAN GT-R R35 VR38DETT 71008-AN027

EVENTURI AIR INTAKE SYSTEM CARBON KEVLAR FOR HONDA CIVIC FK8 EV-K8-KC

 

EVENTURI AIR INTAKE SYSTEM CARBON KEVLAR FOR HONDA CIVIC FK8 EV-K8-KC

Material: CFRP

1. This is the highest peak air intake system from EVENTURI for HONDA CIVIC FK8 that achieves superior intake efficiency, lower intake temperature with large capacity. 

2. The amazing result improvement of 14HP to 20HP and 3 to 4kgfm was obtained just by replacing this air intake system.

3. A carbon Kevlar box is used to create a unique engine room. 

4. EVENTURI had succeeded in blocking the heat from the engine by installing the air filter in a carbon air box with excellent heat insulation plus using a genuine seal between it and the bonnet. 

5. By putting the air filter in the box, you can prevent power loss due to the rise in intake air temperature. 

6. Increase twice the suction by removing the genuine bellows pipe and attach the pipe using the Venturi effect directly to the high efficiency filter. The intake port being addef to the bottom of the carbon box. 

7. Realized greater intake efficiency from this. of. More air being sent to the turbocharger that gives a tremendous quick rise of boost pressure. 

8. So exciting to experience the original power of VTEC turbo not only for circuit driving but also for city riding. 

9. Performance can be further improved by using it together with EVENTURI ECU set according to this air intake system. (The third graph in the image is used in combination with our ECU.) 

10. Intake air temperature will affect filling efficiency and knocking, thus it is necessary to control it so that it does not become excessively high that will jeopardize the total performance.

* To indicate color preference during ordering (RED / BLUE / YELLOW)

EVENTURI AIR INTAKE SYSTEM CARBON KEVLAR FOR HONDA CIVIC FK8 EV-K8-KC