AAM Competition 90MM Premium Sound Adjustable Exhaust - Nissan GTR 08+ AAMGTRE-90ADJ

1. This is a high performance AAM Competition Premium Adjustable Exhaust. 

2. This exhaust system will give you incredible flow (tested over 900 wheel horsepower) by significantly reducing exhaust back pressure. 

3. Mandrel bend and hand welded in AAM US facility.

4. The R-Line Adjustable Exhaust features 90mm T-304 stainless steel piping and a specially designed 3.5” stainless racing muffler.

5. Features:

• Fully adjustable for sound
• Can adjust exhaust note anywhere from quiet mode race, or anywhere in between
• No Drone
• Precision TIG welded T-304 Stainless Steel
• Made in the USA

AAM Competition 90MM Premium Sound Adjustable Exhaust - Nissan GTR 08+ AAMGTRE-90ADJ

 

Tomei Full Titanium Muffler for Mazda Miata MX5 NC '06-'15 TB6090-MZ03A

1. This is a high performance and lightweight signature exhaust from TOMEI. 

2. It is built on the same ethos as the NC MIATA / MX-5 and making it a perfect match for the agile sport car.

3. Great for horsepower improvement and overall efficiency.

KIT CONTENTS

MUFFLER (1) MUFFLER GASKET (1) SILENCER BAND (1) SILENCER BAND RUBBER (1) FLANGE BOLT (2) FLANGE NUT (2) FLANGE BOLT (1) FLANGE NUT (1) SOUND REDUCER (1) ALLEN KEY (1) BOLT SMOOTH PASTE (1)

Tomei Full Titanium Muffler for Mazda Miata MX5 NC '06-'15 TB6090-MZ03A

 

Carillo H-Beam Connecting Rods - Toyota 2JZGTE CAR-H-2J

1. These are the highest quality lightweight steel rods available for the 2JZ-GTE for the best horsepower improvement.

2. It was proven time & time that this Carillo H-Beams Connecting Rods is capable to withstand 1200+ rWHP. 

3. The spectacular design that gives weight at 200 grams less per rod than the factory piece.

4. Carillo rods are the H-beam style rod, not the A-beam and proved to be stronger.

5. A-beam rods are significantly weaker & cheaper (that's why other brands of rods like Eagle cost so much less than Carillo). 

6. If you want the strong rods identical to those found in our Titan Supra then you need purchase these H-beam rods.

7. Kit inclusive of 6 rods and SPS Carr rod bolts, the strongest and the best available rods in the market.

Carillo H-Beam Connecting Rods - Toyota 2JZGTE CAR-H-2J

MegaSquirt Pro Gen 2 for Mazda Miata '99-'00 w/ Manual Trans MSPNP2-MM9900

1. MegaSquirtPNP Gen 2 is a Plug-N-Play Standalone Engine Management System.

2. Built for 1999-2000 USDM Mazda Miata w/ manual transmission.

3. This is a Second Generation MSPNP, easy to use and install.

4. MegaSquirtPNP Model #MM9900 has excellence features:

• Fully Plug and Play Installation – No wiring required for basic functionality.  Average install time is under 1 hour!
• Base map is pre-loaded to help your engine start on the first turn of the key
• Real time tuning and data logging with a laptop connection
• Supports most aftermarket wideband sensors

5. Fully Tunable Engine Control!

• 16×16 Fuel Tables allow high resolution tuning
• 12×12 Ignition Tables
• Multiple Acceleration enrichment strategies
• Closed Loop Idle Speed Control
• Air Conditioner Control
• 4 sequential fuel injector channels with individual trim tables
• Onboard peak and hold drivers support both high and low impedance injectors – No external ballast resistor is needed!
• Allows removal of stock airflow meter
• Controls stock alternator (alternator control not adjustable)

6. Advanced Feature Set (Included!)

• 12×12 Air Fuel Ratio Target Tables for use with wide band O2 sensor for precise tuning and table trim.
• Built-in 2-step rev limiter / launch control with flat shift
• Real time barometric correction
• Internal 4-bar MAP sensor reads up to 44PSI of boost
• Overboost protection
• Closed loop boost control (Requires DIYAutoTune.com EBC solenoid kit)
• Knock sensor input with adjustable sensitivity
• Headphone output for knock sensor – listen for knock while you tune!
• Table switching input. Change fuel and spark maps on the fly for different fuels, nitrous activation, etc.
• Input for flex fuel sensor – switch between E85 and gasoline on the fly!
• CANBus connector allows interconnection of other MegaSquirt-compatible devices for additional functions (EGT Input, Automatic Transmission Controller, Additional Sensors…..the possibilities are limitless!

7. What you get in the box:

• MegaSquirtPNP MM9900 ECU
• MSPNP RS232 serial tuning cable, 6′ (USB adapter sold separately, if needed)
• Tuning Software and Documentation CD
• 6′ Vacuum Hose for MAP Signal and ‘T’ fitting
• Four Screws for ECU mounting

8. Note: 

-Although there is a paid upgrade to TunerStudio, it is not needed to tune this ECU. 

-The free version included on the CD can access all the features and tables of the MegaSquirtPNP. 

-The paid version of TunerStudio simply adds tuning and analysis software, such as VE Analyzer Live to tune the fuel tables based on wideband O2 feedback (requiring a wideband O2 sensor and controller, sold separately).

- Legal only for use in competition vehicles which may never be registered, licensed, and/or used on public streets or highways; and also for use in other exempted vehicles.

MegaSquirt Pro Gen 2 for Mazda Miata '99-'00 w/ Manual Trans MSPNP2-MM9900

 

Skunk2 Honda/Acura B-Series/H-Series (DOHC Only) Cam Seal skk658-05-0200

1. Skunk2 Honda/Acura B-Series/H-Series (DOHC Only) Cam Seal is Skunk2’s Fine Tuning products and accessories. 

2. Compatible Cam Seal for the Honda B16, B17, B18, B20, DOHC D16, F20B, H22, and H23 engines, gives a good finishing touches on your vehicle. 

3. As per Skunk2’s racing heritage and high-performance parts manufacturing practices, each Cam Seal is precision CNC machined from high-quality 6061 billet aluminum and features a durable, anodized finish. 

4. Unlike OEM cam seals, Skunk2 Cam Seals feature three O-rings for a positive seal and a precise fit. 

5. Each Cam Seal comes with a laser-etched Skunk2 logo for the ultimate finishing touch.

Skunk2 Honda/Acura B-Series/H-Series (DOHC Only) Cam Seal skk658-05-0200

 

Skunk2 Pro Series Mazda Miata NB 1.8L (B6ZE(RS)/BP-ZE) 64mm Billet Throttle Body skk309-10-0200

1. Skunk2 Pro Series Mazda Miata NB 1.8L (B6ZE(RS)/BP-ZE) 64mm Billet Throttle Body Skunk2 is the new 64mm Pro Series Throttle Body for the ’99-’05 Mazda Miata in its exclusive, hard anodized finish.

2. Skunk2’s 64mm Pro Series Throttle Body is designed to be used with the OEM intake manifold bolt-on type. The horsepower and torque will increase by maximizing engine airflow.

3. Skunk2 throttle bodies had undergone an extensive design and testing process. It had created a throttle body that doesn't just provide more flow but retains smooth drivability with OEM throttle characteristics. 

4. Each Pro Series Throttle Body is designed using the latest CAE (Computer Aided Engineering) tools, resulted in a unit that exceeds industry standards. 

5. Pro Series Throttle Bodies are also CNC machined from forged, billet 6061-T6 aluminum and hard anodized for durability in Skunk2’s signature finish. 

6. Pro Series Throttle Bodies are also compatible with OEM throttle cables, which simplifies installation. 

7. Each Skunk2 Pro Series Throttle body also features sealed bearings for smooth operation and ultra-strong, upgraded shafts for ultimate durability. 

8. All necessary hardware and a new throttle body gasket are included for trouble-free installation. 

9. A larger throttle body is key to produce additional power throughout the powerband on modified engines with an increased airflow. 

10. Skunk2’s Pro Series Throttle Bodies for Miatas feature a large 64mm bore, that gives significant horsepower gains throughout the powerband on heavily modified N/A applications or on forced induction engines. 

11. Fitment: 1999 - 2005 Mazda MX-5 Miata (1.8L NB)

Skunk2 Pro Series Mazda Miata NB 1.8L (B6ZE(RS)/BP-ZE) 64mm Billet Throttle Body skk309-10-0200

 

ER Spec Front Bash Bar - FRS BRZ GT86 2012-2021 - July 4th  BLF-ER-FRSFBB-UC

1. The ER Spec Front bash bar features 1.5" DOM tubing and reinforced mounting plates that bolts into OEM location on the FRS/BRZ chassis.

2. The bar comes standard with a jack point. This bars is designed to clear all styles of the OEM Front bumper. However due to the jack point bumpers will need to be  trimmed to allow for clearance.

3. These bars are  available raw uncoated. This bar is intended to reuse OEM hardware. 

ER Spec Front Bash Bar - FRS BRZ GT86 2012-2021 - July 4th  BLF-ER-FRSFBB-UC

 

Mishimoto Racing Air Intake for Subaru WRX 2015+ misMMAI-WRX-15

• The stock 2015 WRX intake duct is utilized to provide cool airflow to the high-flow Mishimoto oiled air filter.

• The Mishimoto oiled air filter had an increased filtration surface area compared to the stock paper filter. 

• This filter can be cleaned and reused, providing a lifetime of service. 

• The 2015 WRX intake is optionally available with an enclosed airbox for protection against engine bay heat-soak and provide a stock-like engine bay appearance as well. 

• This unit is a complete bolt-on to your 2015 WRX that functions perfectly with the stock tune and can be installed in one hour using common hand tools. 

• Made in the USA and available with either polished or wrinkle black aluminum intake piping. Like entire line of 2015 WRX parts, includes the signature Mishimoto Lifetime Warranty.
  
  
  Features:
• Direct fit for the 2015+ Subaru WRX
• Dyno-proven maximum gains of up to 33 whp and 30 wtq and peak gains of up to 28 whp and 21 wtq while maintaining safe AFRs on the stock tune (using 93 octane fuel)
• Dyno-proven gains of up to 70 whp and 70 wtq with Mishimoto tune and intake using 93 octane fuel while maintaining safe AFRs on 6 speed WRX (see additional images for dyno chart)
• Extremely aggressive intake tone under acceleration and boost
• Optional airbox inclusion retains stock-like engine bay appearance
• Functions with the stock intake duct which supplies cold air to intake filter
• High-flow oiled air filter provides increased filtration surface area
• Wire-reinforced silicone hose prevents collapse
• Easy installation can be completed in one hour
• Designed in Delaware, USA and filter made in USA
• Available with a polished or wrinkle black pipe finish
• Mishimoto Lifetime Warranty

Mishimoto Racing Air Intake for Subaru WRX 2015+ misMMAI-WRX-15

 

TOMEI PONCAM Camshafts - Nissan SR20DET TA301B-NS08x

• Tomei SR20DET camshafts designed specifically for the S13/S14/S15 SR20DET (specify model  when ordering).
• Both intake and exhaust cams are included.
• Manufactured with a duration of 258 Degrees and a lift of 11.50mm.
• No dialing required—timing has been factory preset with the nock pin.
• Race engineered to enhance airflow ensure proper fitment and seal and meet Tomei’s strict tolerances.
• Designed for direct drop in applications and will work on both the OEM factory ECU and aftermarket ECU's.
• Best used for circuit street and drifting applications.
• Designed for Hydraulic Lash Adjusters
• Noticeable Linear Gains in Performance
• Works best with Bolt On Replacement Turbos
• Pre-Set Valve Timing
• Works with Stock Valve Springs
• Stable Idling

TOMEI PONCAM Camshafts - Nissan SR20DET TA301B-NS08x

 

Brian Crower Adjustable Cam Gears (Pair) - Nissan SR20DET BC8820

1. Precise and accurate advancing and retarding the intake and exhaust cam is crucial for the best setting.

2. The accurate setting if intake and exhaust valve opening timing will give a significant impact on horsepower improvement as well as torque increment. 

3. Brian Crower Adjustable Cam Gears features:

- Anodized 6061 T6 aluminum hubs

- CNC machined to exacting tolerances

- 4140 steel, cold rolled (39 tooth)

- Heat treated gears and 6 bolt hold downs featuring 12 point nuts.

4. The most optimum timing position for camshaft is extremely important to get the best balance of opening and closing exhaust valve vs intake valve.

5. Brian Crower Adjustable Cam Gear will allow for perfect setting that will optimize lean and rich gas consumption at it best.

Legal only for use in competition vehicles which may never be registered, licensed, and/or used on public streets or highways; and also for use in other exempted vehicles.

Brian Crower Adjustable Cam Gears (Pair) - Nissan SR20DET BC8820

GRUPPEM K&N Genuine Replacement Filter for Lamborghini Gallardo JFGE12 GE07L1 33-2490

 

GRUPPEM K&N Genuine Replacement Filter for Lamborghini Gallardo JFGE12 GE07L1 33-2490

1. Compatible Engine: 
Displacement: 5.0 L 
Grade / Specifications: V10 SPYDER 
Genuine part number: 07L133843D 
Product brand: K & N 
Product category: Genuine replacement filter 
Filter shape Size: Panel square ・ Long side 325 x Short side 159 mm 

2. A genuine replacement type air filter that maximizes the characteristics of the genuine cleaner BOX that is not affected by the heat in the engine room.

3. The filter medium uses a unique wet cotton 4-layer filter that has a proven track record and is reliable over many years of racing. 

4. Achieves excellent response and performance improvement by achieving both suction resistance and filtration performance at a high level. 

5. Can be used repeatedly by cleaning with the separately sold maintenance kit for K & N (part number 99-5000).

GRUPPEM K&N Genuine Replacement Filter for Lamborghini Gallardo JFGE12 GE07L1 33-2490

TODA RACING HIGH STOPPER METAL HEAD GASKET FOR ACCORD EUROR CIVIC TYPER K20A 12251- K20- 103

 

TODA RACING HIGH STOPPER METAL HEAD GASKET FOR ACCORD EUROR CIVIC TYPER K20A 12251- K20- 103

1. Milling of the K20A head is impractical due to the one piece front cover. 

2. TODA gasket has been designed to lower the head as far as practical.

3.Features:

Engine type: K20A (CL7/FD2/FN2)
Thickness: 0.3mm
Bore size: ø86.5mm

4. Remark: Sprint race use only 

TODA RACING HIGH STOPPER METAL HEAD GASKET FOR ACCORD EUROR CIVIC TYPER K20A 12251- K20- 103

GRUPPEM RAM AIR SYSTEM FOR AUDI RS6 4BBCYF FRI-184

 

GRUPPEM RAM AIR SYSTEM FOR AUDI RS6 4BBCYF FRI-184

1. Compatible Engine: BCY

2. The specially designed carbon duct has been developed to completely block the hot air in the engine room. 

3. Fresh air is directly introduced to lower and stabilize the intake air temperature. 

4. Achieves torque and power-up in the entire range from low to high revs. You can also enjoy the sporty intake sound. 

5. Installation is bolt-on with a dedicated fitting adapter. 
-Manufacturer: GruppeM 
-Brand: GroupM GruppeM 
-code: 4B (C5) 
-Displacement: 4.2 LITER 
-Grade / Specifications: V8 TWIN TURBO

GRUPPEM RAM AIR SYSTEM FOR AUDI RS6 4BBCYF FRI-184

 

NRG Street Coilovers for Nissan 240SX S14 95-98 nrgDME-NS02

1. The DME SS model coil over suspension system is an entry level model perfect for daily street driven vehicles. 

2. The SS model is equipped with forged aluminum top and bottom mounts for a lightweight durable coilover system. 

3. Utilizing forged aluminum instead of steel gives tremendous weight reduction and the ability to dissipate heat faster. Keeps the coilovers cool and function better.

4. Features:

•Forged 7075 Aluminum upper and lower mounts.
•Lower mounts are threaded to allow height adjustments without sacrificing suspension travel
•Rubber dust shield to prolong piston life
•One year manufacturer warranty
•Re-buildable

5. The DME Coil-Over Kits come with a free 1-year manufacturer warranty which
includes product defects and faults. 

6. Modifications or abuse to the
coil-over (including, but not limited to; spring-droop, overly aggressive
pre-load, cutting, heating etc.) will automatically voids the warranty on the
damper kit. 

7. All warranty claims must be submitted, and approved by NRG  tech/ inspection department (Along with written proof of professional installation). Once approved, the damper will be replaced

NRG Street Coilovers for Nissan 240SX S14 95-98 nrgDME-NS02

 

Ksport Version RR Coilover Damper System - Lamborghini Gallardo 2008 - 2014 - (CLM010-RR)

1. Ksport Version RR coilover System is built specifically for road racing only. 

2. Aggressive rates and valving are chosen for maximum handling and performance with acute reaction and responsiveness.

3. Integrated with 36 levels of damping adjustment, simultaneous compression and rebound adjustment, lightweight aluminum mounts and pillow ball upper mounts on some applications. (Race use only.)

Notes: LP560-4

Front Spring Rate: 18/1008
Rear Spring Rate: 28/1568

Upper Mount Type:
Front:ATM
Rear: ATM

Ksport Version RR Coilover Damper System - Lamborghini Gallardo 2008 - 2014 - (CLM010-RR)